Jump to content
SAU Community

Recommended Posts

My 99 Stagea S2 rear rotors one side is crack! Need change, but i couldn't find any rear rotors for sale for my S2 stagea, they mostly sell rear rotors for M35 or just front rotors only, anyone please tell me where i can buy? Even second also ok f ok for me, i am from Melbourne. THx guys, pls.

My 99 Stagea S2 rear rotors one side is crack! Need change, but i couldn't find any rear rotors for sale for my S2 stagea, they mostly sell rear rotors for M35 or just front rotors only, anyone please tell me where i can buy? Even second also ok f ok for me, i am from Melbourne. THx guys, pls.

I just had the same prob with an S1. Finally got a set from ebay.

Try DBA site or go to Supercheap with Vin No.

  • 1 month later...
  • 2 weeks later...

G'day, ok getting pretty tired of stock brakes with Bendix pads same as X-trail.

Looking at some V35 Brembos from a wrecker.

How do I tell if the rotors have any life left in them ?

Might get ripped off.

cheers

G'day, ok getting pretty tired of stock brakes with Bendix pads same as X-trail.

Looking at some V35 Brembos from a wrecker.

How do I tell if the rotors have any life left in them ?

Might get ripped off.

cheers

Nominal rotor thickness is 30mm; lower limit after machining is probably 28mm.

You'll need pair of vernier calipers to measure accurately.

Used V35 Brembos

Is $1400 too much for a full set ?

Near new slotted discs.

cheers

For a complete set it's probably about as good as you'll do; I've seen tards asking $1k for just the fronts, with worn out rotors.

  • 3 weeks later...
  • 1 month later...

Yes this thread is way too long, with 90% unanswered questions and lots of facts without type of Stagea there for etc. I guess a majority of people no longer have a mighty Stagea in their garage.

I have a Stagea S2 1999 model, I've done about 200K probably on original rotors. I think im overdue for a new rotor and pad combo.

I've changed the pads twice since i've owned it.

Front pads: Once with GSL Rallysport GSL009 HP-X and once with Remsa 0852 14 (Renault Koleos 06.08, Nissan Murano).

Rear pads: Once with GSL Rallysport QDB1399 HP-X and once with Bendix DB1399GCT.

If I can find some rotors i'll probably go to GSL Rallysport again.

Otherwise I might try the upgrade option. I have some R32 GTR calipers and 4 piston alloy Calipers (I think from Z32 turbo). I also have R34 GTT rims on it so probably not a bad option.

On Ebay you can get Rotor and pad packages for Stagea 1996-2001. But I think this is a typo and only for series 1 (1996-1998).

  • Like 1

Yes this thread is way too long, with 90% unanswered questions and lots of facts without type of Stagea there for etc. I guess a majority of people no longer have a mighty Stagea in their garage.

I have a Stagea S2 1999 model, I've done about 200K probably on original rotors. I think im overdue for a new rotor and pad combo.

I've changed the pads twice since i've owned it.

Front pads: Once with GSL Rallysport GSL009 HP-X and once with Remsa 0852 14 (Renault Koleos 06.08, Nissan Murano).

Rear pads: Once with GSL Rallysport QDB1399 HP-X and once with Bendix DB1399GCT.

If I can find some rotors i'll probably go to GSL Rallysport again.

Otherwise I might try the upgrade option. I have some R32 GTR calipers and 4 piston alloy Calipers (I think from Z32 turbo). I also have R34 GTT rims on it so probably not a bad option.

On Ebay you can get Rotor and pad packages for Stagea 1996-2001. But I think this is a typo and only for series 1 (1996-1998).

Just wondering if Auto/Manual or RWD/AWD makes a difference at all.

Just fitted new slotted and dimpled rotors with QFM HPX pads

Also had the Brembos fully serviced. Awesome braking.

I have a slight whirring sound and pedal feel when they are hot.

Hoping this is just still symptoms of bedding in, and not something that comes with dimpled rotors...

Anyone noticed the same ?

Funny I did research before I bought them.

Nothing about noise/feel just positives on cooler rotors and pads.

My stockers were slotted fronts and did the same thing, I thought is was shit pads.

I didn't buy them to look cool, just went on performance forums opinions.

Have you ever heard a girl say "mmmmm, slotted rotors... I think I wanna sleep with you."

I haven't..

So you did research and it said that slots and dimples are better?

That is a shame.

search ferrari brakes on google and try and find one pic of a smooth rotor

here's one chick that does dig cross drilled anyway

post-25026-0-98767000-1450508860_thumb.jpg

Edited by conan7772

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
    • Yeah, I would have said the same. It makes me suggest that there are other things wrong, such that the ECU is totally unhappy with the broken sensor. The only other thought here is that maybe it is shorted, which might cause a different issue to the typical "disconnected" sensor.
    • The fact that US/JDM plates actually fit the skyline bumpers properly is a big, big thing for me as they are the correct dimensions. Annoyingly you can't opt for a normal plate (or plate combination) in that size. You have to make up your own one, and at that point you'd still know it wasn't randomly assigned. 
    • Well, really, that's any ECU, because it's not so much the ECU that the tuner connects to, but a laptop that's connected to the ECU. You have to have the tuning software installed locally. The "remote" part is essentially just remote desktop (RDP) or VNC type access. Nevertheless, if you're looking to upgrade, then you're immediately in the Haltech/Link territory, both of which can be done by any number of competent tuners here in Oz. But without a dyno, you'll definitely also need a wideband O2 sensor fitted, and you'll probably be relying on "auto" tuning a bit, where you drive it around under various loads and then apply the corrections that the ECU learns (basically applying the fuel trims that the ECU has to do to correct the mixtures). Tuning the timing is a little harder. It can be difficult to trust the old OEM knock sensors on RBs, so it is definitely best to have someone who knows what they're listening for, with knock ears (a piezo microphone connected to the engine, and and little amp and headphones so the listener can hear the angry men with hammers who live in the engine). That is more difficult to do remotely, and I suspect the only sane way is to be quite conservative on timing. But that's OK. You're probably waaaaay better off with conservative timing where you are. What is the fuel situation? 98RON available? Or low grade jungle juice?
    • I see your point, I didn't think too deep into it, was purely focused on the price. There's no bad blood between myself and GSM, they acknowledged the price was cheaper else where and at the time couldn't match it. 
×
×
  • Create New...