Jump to content
SAU Community

Recommended Posts

Thank you to everyone within this thread that answered my questions and provided info, and ultimately helped me select my new wheels (width and offset)

Here's the end result (minus big brake kit awaiting fitment)

post-81-14227587210603_thumb.jpgpost-81-14227587427646_thumb.jpgpost-81-14227587668173_thumb.jpg

Skyline model = R33 GTS25t

Wheels/Tyres = Advan RZ-DF & Yokohama A050

Wheel diameter = 18"

Wheel width = 9" & 10"

Wheel offset = +35

Tyre size = 235/40/18 & 265/35/18

Modifications to fit = Rear guards lipped.

  • Like 3

Lots of help from various people on these forums before I bought these - couple snaps from this morning

BNR32 RPF1's 18x9.5+15 with 265/35/18

Std suspension, no guard work, guard liners removed.

photo3_zpsc0b6bdbc.jpgphoto2_zps42ca21d1.jpgphoto1_zps367b1acc.jpg

  • Like 2

Thank you to everyone within this thread that answered my questions and provided info, and ultimately helped me select my new wheels (width and offset)

Here's the end result (minus big brake kit awaiting fitment)

attachicon.gifImageUploadedBySAU Community1422758720.057083.jpgattachicon.gifImageUploadedBySAU Community1422758741.831105.jpgattachicon.gifImageUploadedBySAU Community1422758765.964255.jpg

Skyline model = R33 GTS25t

Wheels/Tyres = Advan RZ-DF & Yokohama A050

Wheel diameter = 18"

Wheel width = 9" & 10"

Wheel offset = +35

Tyre size = 235/40/18 & 265/35/18

Modifications to fit = Rear guards lipped.

Same setup I plan to run on my 33! I'm not sure which tire to run though.... I like the looks of the A050. Have you or anyone else have opinions on these tires? Looking for aggressive tread pattern, dry summer, not quite a slick, type of tire. Good with traction hookup but not destroyed in 10k. Car is a street weekend warrior. Not a track car. I'm located in the states but willing to import a set if it's worth it. Been big on BFGoodrich, Nitto, and Yokohama. Thanks in advance for the advice and input!

Whatsisname, car looks great!

Same setup I plan to run on my 33! I'm not sure which tire to run though.... I like the looks of the A050. Have you or anyone else have opinions on these tires? Looking for aggressive tread pattern, dry summer, not quite a slick, type of tire. Good with traction hookup but not destroyed in 10k. Car is a street weekend warrior. Not a track car. I'm located in the states but willing to import a set if it's worth it. Been big on BFGoodrich, Nitto, and Yokohama. Thanks in advance for the advice and input!

Whatsisname, car looks great!

FBRacing, thanks mate!

I have used a fair range of entry level club/road performance tyres, drag tyres and semi-competition tyres over the last 15 years, NT555R, RE540S, KU36, RS3, RT615, ET Street Radial 1 & 2, R888, A048, and now the A050.

I've not had the A050s for long enough to give you an idea of expected road mileage, but over 10k (miles) is probably a bit on the optimistic side. It also depends how hard you are on them.

Both the KU36 and RS3 returned reasonable mileage (approx. 12mths or 15-20k klms of mild to spirited road use). The KU36s were the earlier 180 treadwear version, as opposed to the newer KU36 which I believe is 200. The Hankook RS3s were 140.

  • Like 1
  • 3 weeks later...

Hey guys looking at getting a set of Work Emotion CR Kiwami sizes are front 18x8.5 +30 and 18x9.5 +38, anyone got pics of this on r33 gtst s2 and what are your thoughts on those offsets/staggered etc? any help appreciated.

hey man i have the same idea for my r33 gtst, keen on what it looks like before i do it

KU36 are shit. They gained popularity when they were released as they were cheap. Kuhmo then put up the price (and the treadwear) and they are now just a waste.

you can get NT05's for less which are a FAR better tyre, or if you can stretch the $$$ AD08's

KU36 are shit. They gained popularity when they were released as they were cheap. Kuhmo then put up the price (and the treadwear) and they are now just a waste.

you can get NT05's for less which are a FAR better tyre, or if you can stretch the $$$ AD08's

I bought some KU36's which had a tread wear of 180. Manufacture date was late last year. From tempetyres for $205ea for 255/40/17. Cheapest I could find on the Nittos was $280ea from Ozze tyres. Treadwear is 200.

I bought some KU36's which had a tread wear of 180. Manufacture date was late last year. From tempetyres for $205ea for 255/40/17. Cheapest I could find on the Nittos was $280ea from Ozze tyres. Treadwear is 200.

treadwear is not standardised. the nitto's are much softer than the KU36's

Last time i bought them the Nitto's were available cheaper. Maybe Kuhmo have dropped the price back

Hankook RS-3 are actually 200 UTQG rated, Hankook revised the rating.Advan A050 is a track tyre, so you'd want to get something like AD08 (or equivalent from other brands, RS-3, Z2 Star Spec, RE-11, etc.)

When Hankook originally released the RS3 their UTQG was 140 AA A - the set I ran on my GT-Four N were stamped 140. The later 200 treadware rated RS3 is exactly the same compound.

Yoko A050s are just fine as a street tyre, on a non-daily... speaking from experience.

Been a while since I used KU36 but they were dirt cheap when I bought them a couple of years back, shitloads cheaper than Nittos! For the right price KU36s aren't bad as a daily driver tyre.

  • 3 weeks later...

Hey guys after reading 20+ pages I'm having a hard time finding anyone with the exact set up as me.

I'm wondering if I could fit 255/35R18 tyres on a set of 18x8.5 +35 D1r's on the R32 GTR. If not there is a 245/35R18 available too which is more likely to fit but the tyres are the same $$ so I figured I'd go bigger if possible. Also my wheels meet the minimum recommended width for both tyres

I currently have 235/40/18 and there is a bit of minor scrubbing on the front right but not the left.

Should I roll the guards and fit the big tyres? the 255/35 have a lower rolling diameter than the 235/40

The car is about 1-1.5 inch down from stock height but I will be raising it slightly with new coilovers in the coming months.

Thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...