Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

I've got the DVD's from Canman on SDU as well (I got his last set). 2 DVD's per race 1990, 1991 & 1992 including all of the pre-race coverage.

I've had some PM's about making copies of these for others. I am more than happy to do this but I am having trouble copying som of the discs. I have tried Nero, DVD Shrink and UltraISO, but they all seem to get stuck part way through.

Any of you guys have a DVD copy program that will copy all bits and/or ignore read errors? The discs are not encrypted, I think there are just some bad sectors.

try IsoBuster or UltraIso Dirk

when you are done add me to the list of people who want copies :)

The GT-R's, in terms of lap speed, are a long way off the current V8's.  Put that down to extra weight, boost restrictions and tyre technology.

2min 12sec in 1992 -- from a 1600kg , boost restricted, little development time car

thats only 4sec/lap slower......in 13years!

2min 12sec in 1992 -- from a 1600kg , boost restricted, little development time car

thats only 4sec/lap slower......in 13years!

From memory they were 1500kg. They had also had two and a half years of development put into them - basically with Winfield & Nissan money behind them money was not a object for GMS at the time. By way of comparison they were still appreciably faster than the four V8's entered that year. (Two for HRT, one for Brock, one for Glenn Seton)

The best bit was after spending the lead up to the race whingeing about how the cars would be unsafe at 1500kg Freddie Gibson had to do an about face & convince CAMS that his cars were safe to enter the race...

One of the guys over here wants to borrow mine to get a copy, so I'll see how he goes copying them and let you know. I don't know much about computers and that sort of thing, and I don't have a DVD burner so I can't try it myself

that would be awesome. I'm happy to pay what ever it takes!

I've seen the 'turbolent era' video and to be honest it's pretty average. I would much rather have this tape of the whole races :)

From memory they were 1500kg.  They had also had two and a half years of development put into them - basically with Winfield & Nissan money behind them money was not a object for GMS at the time.  By way of comparison they were still appreciably faster than the four V8's entered that year.  (Two for HRT, one for Brock, one for Glenn Seton)

Glen Seton in a Commodore?

And going back to the 92 race, it was as a shame the race was stopped as the 2nd GTR with Crompton and Ollofsen (spelling) were in 3rd only 10-15 seconds behind Johnson and they were already on wets. Old Crompo would have won Bathurst if it didnt get flagged

Glen Seton in a Commodore?

And going back to the 92 race, it was as a shame the race was stopped as the 2nd GTR with Crompton and Ollofsen (spelling) were in 3rd only 10-15 seconds behind Johnson and they were already on wets.  Old Crompo would have won Bathurst if it didnt get flagged

Glenn Seton was driving a Falcon with Allan Jones, sponsored by Peter Jackson. He won the Touring Car championship the following year in it.

I've got the DVD's from Canman on SDU as well (I got his last set). 2 DVD's per race 1990, 1991 & 1992 including all of the pre-race coverage.

I've had some PM's about making copies of these for others. I am more than happy to do this but I am having trouble copying som of the discs. I have tried Nero, DVD Shrink and UltraISO, but they all seem to get stuck part way through.

Any of you guys have a DVD copy program that will copy all bits and/or ignore read errors? The discs are not encrypted, I think there are just some bad sectors.

DVD decripter is the program you want.

I wouldn't mind a copy aswell. PM me if you get them copied.

I was lucky enought to hear one of the GT-R's at idle three or so years ago.  I went to the bathurst 24hr where they had one of the GT-R's out in the car park. 

They are a serious bit of kit and sound awesome.  So much harder than any GT-R I have ever heard.

9.4 to 1 compression ratio helps.

2min 12sec in 1992 -- from a 1600kg, boost restricted, little development time car

thats only 4sec/lap slower......in 13years!

The recent track resurfacing and the current race tyre technology would see a good 6 second per lap improvement. Then there is the current minimum weight of 1355kgs, the V8SuperCars would get lapped 4 to 5 times in the 1,000k's.

And that my friends is why they don't let GTR's race with the Commondoors and Foulcans. The severe ass whipping would be very embarasing.

But fear not, you can see the R32GTR's whooping it up against the pushrod dinosaurs 6 times a year. Thanks to Duncan and the Man in Bulk (the current NSW Combined Touring State Champion).

:) cheers :)

Edited by Sydneykid

The other Gibson car is owned by Terry Ashwood in the NSW club, he gets it out and about in it a fair bit which is great....group A historic races. He also has the skaife R31 and the Gibson Exa, the fury bluebird etc etc etc

drunken, any ideas what someone would pay for the fox or ashwood GTR? also I take it the GIO car isnt around anymore? and I think there might be 1 more? but Im not sure....

was the ashwood one in the condition it is in when bought? or did he bring it up to that show car standard?

ok the envy....

Absolutely no idea of the cost...the mind boggles....collectable race cars demand huge prices, but at the other end of the scale cars with no history or impact on racing are basically worthless....eg you can buy an late 90s supercar for under $30k.

Terry bought pretty much the whole Gibson collection, so maybe he got a small discount :O I'm pretty sure the EXA needed restoring as it arrived crumpled from the big crash it had, not sure about the others.

But Terry has been very accessible and willing to come along to club events, so ask him sometime :(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
    • It's amazing how well the works on the leather seats. Looks mint. Looking forward to see how you go with the wheels. They do suit the car! Gutter rash is easy to fix, but I'm curious about getting the colour done.
×
×
  • Create New...