Jump to content
SAU Community

Recommended Posts

not so bad, you can now buy something that works. HUMM, maybe i should do thesame. LOL.

On another note, i scorred all the gaskets and studs and bits and pices needed for the exhaust manifold repair for $154 all up. YEEHHHAAAA.

Looks like i have sold my snotter :(

damn :ermm::ban:

not so bad, you can now buy something that works. HUMM, maybe i should do thesame. LOL.

On another note, i scorred all the gaskets and studs and bits and pices needed for the exhaust manifold repair for $154 all up. YEEHHHAAAA.

you can both buy my 33 :O , hasnt missed a beat :w00t:

not so bad, you can now buy something that works. HUMM, maybe i should do thesame. LOL.

On another note, i scorred all the gaskets and studs and bits and pices needed for the exhaust manifold repair for $154 all up. YEEHHHAAAA.

:O you shouldn't even have to ask what the plan is!!!

damn :ban::(

you can both buy my 33 :ermm: , hasnt missed a beat :w00t:

Still got the turbo for sale though Toff :P

Id love to buy your 33 but i just need some wheels to get around the net few weeks as it is without being fancy!!!

wogs....what was your torque reading on the 25?

at 170rwkw my torque was 550.2Nm !!!

dam thats ship loads. maybe i should bold an old rb30 in my 32 and bolt on a dirty old turbo. surly that would spin the wheels easy.

hahahah, you can feel the torque, well after owning silvias, r32 gtst, r31 gts with rb25, 300TT, vr4 etc etc.....Like the torque of the RB30.

Yeah turbo on, just sorting out the little problems like getting the raditator flushed today and the flywheel machined (damn vibrations in the clutch made it look like I was a retard trying to drive)

LOL. yeah i miss tourqe, the magan has a bit over 400 nM at the front wheels, and that is GREAT, any gear, bag, your away. Skyline, you need to rev it to get anywhere. LOL.

Well done mate, can't wait to see it.

On an up note, found out last night that my FICD, FIRTS IDLE CONTROLL DEVICE solenoid, doesn't work. See if this makes any differance.

plan B, build the bitch up, pronto. LOL.

That requires money and i owe more than i have let alone coming up with enough to rebuild it.

Im going to strip as much off/out of the shit heap as i can and flog it all along with the rolling shell!!!

Then once thats done im out of cars for a while, IM OVER THEM and all there PROBLEMS

Before you get too excited about torque figures remember a dyno set up in power mode (eg rwkw) will not accurately measure torque.

I mean, if the dyno was set up for a torque reading and you got 550Nm then that's an awesome result, but if it wasn't then there is absolutely no truth in that figure. This was a big problem after the dyno day with Dr Drift when everyone started saying "I have such and such Nm", when all their figures were complete rubbish.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...