Jump to content
SAU Community

Recommended Posts

anyone know if boost in lton does nistunes yet?

i've heard that brad likes to push the use of microtech and i've been told by some guys in the know that there are much better options

i find that if you do mods yourself you know when stuff isn't quite right and you can usually pinpoint it more easily

hmmm, might have to pay him a visit then......

i thought gt garage in hobart were the main nistuners in tas and a few ppl from lton go down there for nistuning

people go every where over tas to get stuff done because of one reason or another.

all you have to do is ask. ive been dealing with brad for years now and i didnt even know he dealt with nistune untill a few months ago. i guess you never know unless you ask.

brad has had a lot of experiance tuning all kinds of ecus. he profers Haltechs much like fueltech like vipecs. every place has there profered.

at then end of the day the ecu is there to adjust parameters of the engine and how effiently it does this is all that matters. Ecus like wolf and microtech have half as many load points to adjust these that is why they are not viewed to be as good. plenty of people still use them thoe.

people go every where over tas to get stuff done because of one reason or another.

all you have to do is ask. ive been dealing with brad for years now and i didnt even know he dealt with nistune untill a few months ago. i guess you never know unless you ask.

brad has had a lot of experiance tuning all kinds of ecus. he profers Haltechs much like fueltech like vipecs. every place has there profered.

at then end of the day the ecu is there to adjust parameters of the engine and how effiently it does this is all that matters. Ecus like wolf and microtech have half as many load points to adjust these that is why they are not viewed to be as good. plenty of people still use them thoe.

might go talk to him if i decide to srop some money on the stagea

when would i be able to try out those d1r's?

might go talk to him if i decide to srop some money on the stagea

when would i be able to try out those d1r's?

when ever you like. just send me a pm and arange a time. they are on my race car and only 5 mins to pull off.

ive also found boost to be cheaper than GT for general tunes and nistunes.

Huge thanks to Damo yet again. Managed to get my speedo working and repair a snapped wire on one of my knock sensors.

Possibly was dodgy connection prior to me snapping wire as I now a full power with no pops/bangs/misfires whatsoever and I now have a working speedo :rofl:

Now touch wood nothing will go wrong so I make the track day in August.

so after talking to the original owner of my 33 im even more interetsed to see what sort of power it has now, turns out that before the engine was rebuilt with 26 goodies it made 207.3rwkw on 12psi & 228rwkw on 15psi

Edited by Autumn33

pulled off the rear bar of the 33 today to see how bad the damage is ( was done by the previous ownerspank.gif )

so the 33 currently looks like this sad.gif ( the skyline center garnish is just sitting there so it looks more in on one side)

post-71390-0-45709700-1308040700_thumb.jpg

Edited by Autumn33

little update been talking about ecus a bit lookn at a haltec platnum or the link thats a direct plug in with the r34 true they where going to look into it for me depends on $$ for wat i get in the end ...

on a diff note got my rocker covers back thanx to L'ton powder coating shit pics (Fn ipod cam) but will look grate on ,get my plenum and pipes back 2mora

ill add pics as i get them IMG_0152.jpg?t=1308124405(space blue) to go with my other parts :thumbsup:

how much was that if you don't mind me asking?

also, i'd go see brad at boost for a nistune

pretty sure they will support up to about 500hp (don't know exactly) but it will support bigger injectors, bigger afm, and lots of stuff (plus they keep being able to unlock more and more features with every new firmware update)

how much was that if you don't mind me asking?

also, i'd go see brad at boost for a nistune

pretty sure they will support up to about 500hp (don't know exactly) but it will support bigger injectors, bigger afm, and lots of stuff (plus they keep being able to unlock more and more features with every new firmware update)

Send Veeto a PM, he just put a Nistune in his Stagea, pretty cheaply too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...