Jump to content
SAU Community

Recommended Posts

I'm chasing a manual, though I have thought about doing a manual conversion if I can source it all for the right price. I'm not sold on the 260s as I'm planning on using it for a tow car, and I think they are too nice to be used for that. I'm also thinking the R34 front conversion might be a good project down the track, which I wouldn't even consider on a 260.

I've look at the M35s, apparently they aren't too bad, though I like the thought of having the same drivetrain in the tow car as the track car; will make maintenance a breeze.

Also, as far as budget goes, I'll looking around the 15k mark, but if it's nice enough I may stretch it a little. And if it's in need of work in the right places (ie things I can fix myself) I'm not against saving money.

Went and had a look at this today ( http://www.carsales.com.au/all-cars/private/details.aspx?R=11458359&__Qpb=1&Cr=0&__Ns=pCar_PriceSort_Decimal|1||pCar_RankSort_Int32|1||pCar_Make_String|0||pCar_Model_String|0&keywords=&__N=1216 1246 1247 1252 1282 4294963846 410 901&silo=1011&PriceTo=410&seot=1&tsrc=allcarhome&__Nne=15&trecs=343&__sid=132443BA580D) appears to be pretty clean, was thinking of getting it checked over by a workshop. Does anyone have any idea of furthur things to look out for?

Im very interested in getting C34, currently i have an r33 gtst and an older fairlane, i wont a car that has the things that both of these have in one package, 2 questions:

Can you use nistune?

And possibly the killer, have not seen it listed as a feature, do they have cruise control?

Im very interested in getting C34, currently i have an r33 gtst and an older fairlane, i wont a car that has the things that both of these have in one package, 2 questions:

Can you use nistune?

And possibly the killer, have not seen it listed as a feature, do they have cruise control?

1) You can use Nistine on the C34 series 2 (type 4 board).

2) No they don't have cruise control. There are aftermarket options available though.

  • 2 weeks later...

I'm chasing a manual, though I have thought about doing a manual conversion if I can source it all for the right price. I'm not sold on the 260s as I'm planning on using it for a tow car, and I think they are too nice to be used for that. I'm also thinking the R34 front conversion might be a good project down the track, which I wouldn't even consider on a 260.

I've look at the M35s, apparently they aren't too bad, though I like the thought of having the same drivetrain in the tow car as the track car; will make maintenance a breeze.

Also, as far as budget goes, I'll looking around the 15k mark, but if it's nice enough I may stretch it a little. And if it's in need of work in the right places (ie things I can fix myself) I'm not against saving money.

if you're keen come to the next stagea cruise and have a suss, plenty of guys have done the manual swap and could give you a hand.

And if you're talking 34 GTR front end, what better colour than Bayside bluethumbsup.gif

stageagtr.jpg

If you're looking at a Stag as a tow car, go the C34. Higher towing capacity than the M35 as far as I can tell, since the M35 has an alloy subframe.

Buy Robbie's Stag. Convert to manual. Convert to R34 front. Win.

  • Like 1

if you're keen come to the next stagea cruise and have a suss, plenty of guys have done the manual swap and could give you a hand.

Yea, I'm not going to be around for the cruise =(

A manual swap isn't too hard, but it's the time and effort required. I have been stalking Robbie's thread... plus a few others. I'm not going to buy till January as I'm overseas till then.

Keep in contact mate, I'm not in a hurry to sell. My new car won't be viable till mid next year.

Gotta get enough dollars through my business so I can get the new vehicle as a company owned toy :)

  • 5 months later...

Hey guys,

I have done a bit of a research without much luck. this new forum layout is doing my head in xd

looking at buying a c34 series one (non tiptronic) for a bitof an all rounder.

camping on the weekends and bit of towing here and there.

Any good for heavy towing? are the non tiptronic boxes okay for towing with?

I would think with heavy loads you would want to be in 3rd gear and keep it out of overdrive where possible.

I am looking at a C34 RSfour auto awd,

  • 6 months later...

If I recall right, SK used his series 1 as a towcar for years without problems. He suggested upgrading the standard trans cooler though (it's just a small tube-and-fin unit on S1's) and I think he used a Davies Craig unit. I suggest talking to a reputable trans specialist for finer details. If you're stuck for one try MV Automatics in Blackwood, Adelaide. Mike knows automatic transmissions.

  • 2 weeks later...

Exactly true, Sydneykid used to tow an R33 GTSt with his s1 (and probably still does - he hasn't been on here for quite a while as far as I know, so we have no idea).

Also, Duncan would probably still be using his s1 to tow his R32 GT-R around if he wasn't busy with other things at the moment. (On a side note, though, Duncan has upgraded his car to an RB30 and replaced the auto box with a manual.)

  • 2 months later...

i use my 260 stagea to tow my boat, it has the power to pull it and rides well. only problem is fuel consumption, it might be the tune but it uses roughly 25L/100km. the boat weighs 1100kg plus the weight of the trailer. so it pulls it but its expensive

  • 1 year later...

hi i was looking at buying a stagea rs for my first car in qld (will be on p plates)

i love the look of this wagon and i have my heart set on owning one eventually and will do an r34 conversion eventually, but i was wondering if this is practical for p plates. i have seen that this car presents issues with insurance premiums. also does the rb25det turbo engine require much service and additional cost if i plan to leave the engine stock?

hi i was looking at buying a stagea rs for my first car in qld (will be on p plates)

i love the look of this wagon and i have my heart set on owning one eventually and will do an r34 conversion eventually, but i was wondering if this is practical for p plates. i have seen that this car presents issues with insurance premiums. also does the rb25det turbo engine require much service and additional cost if i plan to leave the engine stock?

I thought you were not allowed a turbo on P plates? If you leave it stock servicing should be within your capabilities - all the info is on this site. Insurance will only be a problem because of your age.

  • Like 1

The S1 C34 RB25DET can be driven by a P plater but you have to apply for a Certificate of Exemption for High Powered Vehicles.

My 21 yo had to get one. Incidently the S1 stock auto is only classified as a "Moderately Powered Vehicle"

One thing to remember is that the Exemption is vehicle specific. Each type you want to drive needs a specific exemption.

Insurance is no problem. It just costs.

  • 3 months later...

has anyone has any experience with importing cars, and more specifically a stagea. been looking at pacific coast jdm importing but im not too sure who is the best importer. chasing an autech version btw

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...