Jump to content
SAU Community

Recommended Posts

Just wondering why those running 18" rims are using 235/40/18 tyres as opposed to 22/40/18 tyres that have a closer rolling radius to the standard 225/50/16 tyre, apart from the fact they are wider?

Wouldn't the 225/40 have a narrower sidewall than the 235/40 - this is purely visual difference

Yes, yes and yes. However, the 235/40R18 is far more common, therefore a wider choice in product availability and, they are generally cheaper.

Does anyone think its a stupid idea to run different widths front/back. Ive found some cheap wheels, but they are 7.5 fronts and 8.5 rears. As long as i match rolling, but its never PERFECT....not sure what to do :)

you'll eventually burn out the transfer case,as it'll be constantly compensating for the different rolling diameters front-to-rear.

as for the std S2 17" wheel,I'm afraid I can't help with this,as I have only a compliance placard as well...

Justin...

  • 1 month later...

OK, it's taken me a while, but I pulled a wheel of the series 2 S (with the standard 17inch wheels) today.

The Rims are 17x7JJ 30

My 8inch rims (standard) from the R34 GTX turbo don't fit - well they fit, but there is no way I would have taken it for a drive as the rubber would have been rubbing quite a few things...

Hope that helps.

OK, it's taken me a while, but I pulled a wheel of the series 2 S (with the standard 17inch wheels) today.

The Rims are 17x7JJ 30

My 8inch rims (standard) from the R34 GTX turbo don't fit - well they fit, but there is no way I would have taken it for a drive as the rubber would have been rubbing quite a few things...

Hope that helps.

That's what I've got on mine. 8inch would fit with a bigger offset.

  • 9 months later...
you'll eventually burn out the transfer case,as it'll be constantly compensating for the different rolling diameters front-to-rear.

The ATTESSA handles different tyre diameters due to wear ie; you can have barely legal tyres on one end and brand new tyres on the other end. That's a 6 mm difference in radius, 12 mm in diameter and 37 mm in circumference. That's covers most width profile differences easily.

Real world, my Stagea doesn't like 225/50/16's on one end and 245/40/17's on the other end. After less than 1/2k driving in a straight line, the ATTESSA started to shudder. I had to turn the steering wheel (for imaginary corners) to stop the shudder. I must have looked like a lunatic, warming the tyres up driving down the freeway.

:huh: cheers :P

  • 1 month later...

i dont think i have quite made a post in here yet so i will

18x9 +0 offset with spacer to clear GTR brakes

18x10 +20 no spacer

Problems

if you do not have rear toe arms and camber arms, going low is a problem in the rear for sure.

You need to put a decent roll on the rear, so you can get as near to 0 camber static as possible to keep from hitting the coilovers. as wwell as a stiff springrate and sway bars will help this fact as well.

Front....well im still working on that.

but they kinda fit. I spraypainted the inner well so i can find out where it is rubbing, right before full lock it rubs somewhere, but at full lock it doesnt, so i have to figure that out.

other than that

at my current height, no big problems, or at least nothign that a little thinking and money wont fix.

406702941_8ea682d475.jpg

406702878_99e1df16bd.jpg

tires are 235/40 front and 245/40 rear

soon to be a 225/40 front and 235/40 rear once i decide to go get them

406702791_5d46ba756f.jpg

Edited by yokotas13
  • 4 months later...

I have an RS Four S, Series 2 manual with the factory 17's.

Can confirm the wheels are 17 x 7 with 30 offset.

The tyres are 215/50 R 17.

I was browsing the Work Wheels jap website and they have a recommended fitting guide for the Stagea, incidently every listing shows the same width and offset for both front and rear wheels.

Here's what they say will fit:

16 x 7 35 225/50 16

17 x 7 35 225/45 17

17 x 7.5 28 225/45 17

17 x 7.5 30 225/45 17

17 x 8 30 225/45 17

17 x 8 32 225/45 17

17 x 8 35 225/45 17

18 x 7.5 29 225/40 18

18 x 7.5 30 225/40 18

18 x 7.5 31 225/40 18

18 x 7.5 32 225/40 18

18 x 7.5 35 225/40 18

18 x 8 30 225/40 18

18 x 8 33 225/40 18

18 x 8 35 225/40 18

18 x 8 38 225/40 18

19 x 7.5 28 225/35 19

19 x 7.5 32 225/35 19

19 x 8 26 225/35 19

19 x 8 29 225/35 19

19 x 8 30 225/35 19

19 x 8 32 225/35 19

19 x 8 35 225/35 19

19 x 8 38 225/35 19

I assume theses sizes have been tested (at least in theory) on standard vehicle. If you have suspension mods some of these sizes may not fit.

Hope this info is helpful. :)

Edited by PhilTacular

Rather than start a new thread on the same topic, I thought I'd post in here...

I'm up for new tires soon, and the placard on my door also says both 205 60R16 or 225 50R16 (which I have at the moment).

The current tires are cheap (simex) brand and I'd like to improve this with my next set. But I need some info.

The current tires' sidewalls bulge a fair bit which I presume would affect handling negatively. Would a better quality tire improve this at all?

And I'm not looking at paying a lot, just want tires that aren't too cheap and nasty and aren't too expensive either (say in the $150-200 range per tire, but hopefully closer to the $150 mark).

I'd prefer longer lasting tires than super handling...

Any recommendations? I figure its probably best to stick with 225/50's as thats whats on there now. Not sure why they list 2 different widths anyway...

And can anyone confirm what pressure they should be at? I've always filled them to 38-40psi thinking that was better. Never noticed that the sticker says 29 & 32 psi Is the sticker wrong?

cheers :D

BTW

a good stagger for the stagea if your interested in a 9 inch wheel is

9 +30 rear

9 +20 front

it clears almost everything, depending on your height you might want t hammer up the inner lip on the fender

but other than that your good

  • 4 weeks later...
Rather than start a new thread on the same topic, I thought I'd post in here...

I'm up for new tires soon, and the placard on my door also says both 205 60R16 or 225 50R16 (which I have at the moment).

The current tires are cheap (simex) brand and I'd like to improve this with my next set. But I need some info.

The current tires' sidewalls bulge a fair bit which I presume would affect handling negatively. Would a better quality tire improve this at all?

And I'm not looking at paying a lot, just want tires that aren't too cheap and nasty and aren't too expensive either (say in the $150-200 range per tire, but hopefully closer to the $150 mark).

I'd prefer longer lasting tires than super handling...

Any recommendations? I figure its probably best to stick with 225/50's as thats whats on there now. Not sure why they list 2 different widths anyway...

And can anyone confirm what pressure they should be at? I've always filled them to 38-40psi thinking that was better. Never noticed that the sticker says 29 & 32 psi Is the sticker wrong?

cheers :action-smiley-069:

i personally fill my tires to 33-35psi depending on where im going

  • 3 weeks later...

i read all of this and still dont have a clear answer. i probably missed it. so will any rim (in skyline stud pattern)17 or 18 inch diameter, 9 inches wide with a +30 offset fit?? or do u need a different width and offset front to rear. id like to have the same width and off set all round i can rotate the tires, but if i cant then i wont worry about it. or should i just use a narrower rim like 8.5 or 8 inch

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...