Jump to content
SAU Community

Recommended Posts

Does anyone know if 17x9 will fit on the back of a s2 rs4 with stock brakes and suspension, will be geting lowered 25mm at the same time.

Probably put either 245s or 255s on the rear

Like MIKE said they will fit. I had a set of r33 gtr rims on my s1 which are 17x9 et30 and had no clearance issues at all. I am currently running a 9x17 et15 with a 235/40 tyre and probably would have had some clearance issues had the arches not been rolled.

My plan is to eventually run 9.5x18 et12 with a 255/40 tyre which will probably need the rear arches pulling or flared slightly (the fronts have been flared already)

http://www.skylinesaustralia.com/forums/in...t&p=4559953

Edited by Califunky

I am very new to all the wheel fitment, could someone please tell me if these will fit a 00 stagea on stock suspension?

Size: 18" x 7.5

Hole: 8/10

P.C.D.: 4/100, 4/114.3, 5/100 and 5/114.3

Offset: 35p-40p

Edited by 187
I am very new to all the wheel fitment, could someone please tell me if these will fit a 00 stagea on stock suspension?

Size: 18" x 7.5

Hole: 8/10

P.C.D.: 4/100, 4/114.3, 5/100 and 5/114.3

Offset: 35p-40p

they'll fit but will look ASS in my opinion. they are narrow and have a high offset.. lose-lose in my books

sit ~25mm in from a gtr wheel roughly and if it's your car in your avatar with the carbon guard flares the wheels are going to be sunken as

Thanks Mike, appreciate the answer. I had seen them on ebay and was just wondering what they would look like, because all these numbers arn't making alot of sence. I wil search through some of the topics here and get a bit more info i think.

Do you have any suggestions??

Yeah the car in my avatar is the one im enquiring about, i was thinking along the lines of black wheels. But at the moment the wheels dont seem to fit the guards very well, seems to be alot of space around the tyre.

I am very new to all the wheel fitment, could someone please tell me if these will fit a 00 stagea on stock suspension?

Size: 18" x 7.5

Hole: 8/10

P.C.D.: 4/100, 4/114.3, 5/100 and 5/114.3

Offset: 35p-40p

They have the same stats as my Nismo LMX5's.

18 x 7.5 +40

Certainly don't look like ASS, but I suppose that is more to do with the wheel design.

.... would love some dish though *dreams of black RE30's 19 x 9 +20*

They have the same stats as my Nismo LMX5's.

18 x 7.5 +40

Certainly don't look like ASS, but I suppose that is more to do with the wheel design.

.... would love some dish though *dreams of black RE30's 19 x 9 +20*

Does somebody know (preferably in perth) where i can find some matte black wheels, 17-19''. Im also pretty clueless when it comes to the right offset, etc. :happy:

7,5" wide is too narrow. These are heavy and powerful cars and you want as much tyre contact patch and as less tyre wall movement as possible. I would be looking for a minimum of an 8" wide rim but ideally 9 or 10" wide for easthetics. imo anything lower than an et35 will fit (maybe slightly higher but be careful of strut clearance). The lower you go on the et the more you will have to start thinking about tyre stretching, adding negative camber and rolling the arches.

  • 2 weeks later...
what are chances of putting 19 X 10.5 with 275 35 on an ARX?

Whoa! With a low offset I suppose it could be done.

Will have a fair bit sticking out of the guards (although no where near as much as on an RS/RX).

Prepare for some tyre rubbing as well.

I would say that 9.5 is about as wide as you could comfortably go, with 9" wide probably being about right.

Edited by iamhe77

Hey guys read this whole post but i'm still confused

i want to get 19/8 with 245 or 265 if they will fit a 8" rim

What i need to know before i order them is what offset will fit a 97 S1 Rs4 with standard suspension

Edited by 25stagea
Hey guys read this whole post but i'm still confused

i want to get 19/8 with 245 or 265 if they will fit a 8" rim

What i need to know before i order them is what offset will fit a 97 S1 Rs4 with standard suspension

go roughly +20 offset and they will sit nice, pretty much the same as bnr34 wheels

Should have mentioned, 18x8" +8, 18x9" +7, 225/40s all round, on a S1 stag. Would be happy to roll lips flat but baulk at flaring. Opinions?

fronts will sit nice with a lipping of the guards (just the lip folded up)

depending on how low and the amount of camber you run, the rears will poke a little - not enough to warrant a flare of the guards with those tyre specs though (again get away with lipping)

i have read parts of this thread a few times and the whole time i thouht everyones numbers sounded too small an offset. so low and behold i finally bought tyres for my rims with my tax. my wheels are 18x8 +35 front and 18x8 +6 rear. the rears sit perfectly and my fronts require 10-15mm spacers. how is veryone happy with these +40 offsets??

  • 3 weeks later...

I'm looking at putting the following rims & tyres on my S2 RS Four S Stagea:

18' ENKEI 5 SPOKE 5/114.3 + HANKOOK TYRES

18 x 7.5 +38

225/40R18 HANKOOK TYRES

Will these fit my Stagea & can I get away without rolling my guards.

I'm currently running stock 17's.

I'm looking at putting the following rims & tyres on my S2 RS Four S Stagea:

18' ENKEI 5 SPOKE 5/114.3 + HANKOOK TYRES

18 x 7.5 +38

225/40R18 HANKOOK TYRES

Will these fit my Stagea & can I get away without rolling my guards.

I'm currently running stock 17's.

Those look pretty similar to my Nismo rims (18x7.5 +40)

They will fit easily.

The only way that they may cause a bit of difficulty is if you have big brakes on the front.

Edited by iamhe77
I'm looking at putting the following rims & tyres on my S2 RS Four S Stagea:

18' ENKEI 5 SPOKE 5/114.3 + HANKOOK TYRES

18 x 7.5 +38

225/40R18 HANKOOK TYRES

Will these fit my Stagea & can I get away without rolling my guards.

I'm currently running stock 17's.

No don't do it, they are too narrow and they will sit in way too much. I have 19 x 8.5 +20 offset rims on a S2 Type S Stagea. My car is lowered and I have had no guard rolling and I get no scraping at all.

You should go for at least 8.5 inch rims in about a +20 offset. Here is a pic of how my rims sit

post-39581-1249263565_thumb.jpgpost-39581-1249263603_thumb.jpg

Those look pretty similar to my Nismo rims (18x7.5 +40)

They will fit easily.

The only way that they may cause a bit of difficulty is if you have big brakes on the front.

this isn't always the case. brake clearance is determined by disk type, particularly in wheels with dish

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah. Was just wondering if you were having a small stroke or if there was some slur/gaf/inside joke that I wasn't aware of.
    • That was a fark up, it's Salamanca Place I was thinking of. And now I'm curious as to what potential slur/gaf I have caused with Salamander Road, ha ha!
    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
×
×
  • Create New...