Jump to content
SAU Community

Recommended Posts

Does anyone know if 17x9 will fit on the back of a s2 rs4 with stock brakes and suspension, will be geting lowered 25mm at the same time.

Probably put either 245s or 255s on the rear

Like MIKE said they will fit. I had a set of r33 gtr rims on my s1 which are 17x9 et30 and had no clearance issues at all. I am currently running a 9x17 et15 with a 235/40 tyre and probably would have had some clearance issues had the arches not been rolled.

My plan is to eventually run 9.5x18 et12 with a 255/40 tyre which will probably need the rear arches pulling or flared slightly (the fronts have been flared already)

http://www.skylinesaustralia.com/forums/in...t&p=4559953

Edited by Califunky

I am very new to all the wheel fitment, could someone please tell me if these will fit a 00 stagea on stock suspension?

Size: 18" x 7.5

Hole: 8/10

P.C.D.: 4/100, 4/114.3, 5/100 and 5/114.3

Offset: 35p-40p

Edited by 187
I am very new to all the wheel fitment, could someone please tell me if these will fit a 00 stagea on stock suspension?

Size: 18" x 7.5

Hole: 8/10

P.C.D.: 4/100, 4/114.3, 5/100 and 5/114.3

Offset: 35p-40p

they'll fit but will look ASS in my opinion. they are narrow and have a high offset.. lose-lose in my books

sit ~25mm in from a gtr wheel roughly and if it's your car in your avatar with the carbon guard flares the wheels are going to be sunken as

Thanks Mike, appreciate the answer. I had seen them on ebay and was just wondering what they would look like, because all these numbers arn't making alot of sence. I wil search through some of the topics here and get a bit more info i think.

Do you have any suggestions??

Yeah the car in my avatar is the one im enquiring about, i was thinking along the lines of black wheels. But at the moment the wheels dont seem to fit the guards very well, seems to be alot of space around the tyre.

I am very new to all the wheel fitment, could someone please tell me if these will fit a 00 stagea on stock suspension?

Size: 18" x 7.5

Hole: 8/10

P.C.D.: 4/100, 4/114.3, 5/100 and 5/114.3

Offset: 35p-40p

They have the same stats as my Nismo LMX5's.

18 x 7.5 +40

Certainly don't look like ASS, but I suppose that is more to do with the wheel design.

.... would love some dish though *dreams of black RE30's 19 x 9 +20*

They have the same stats as my Nismo LMX5's.

18 x 7.5 +40

Certainly don't look like ASS, but I suppose that is more to do with the wheel design.

.... would love some dish though *dreams of black RE30's 19 x 9 +20*

Does somebody know (preferably in perth) where i can find some matte black wheels, 17-19''. Im also pretty clueless when it comes to the right offset, etc. :happy:

7,5" wide is too narrow. These are heavy and powerful cars and you want as much tyre contact patch and as less tyre wall movement as possible. I would be looking for a minimum of an 8" wide rim but ideally 9 or 10" wide for easthetics. imo anything lower than an et35 will fit (maybe slightly higher but be careful of strut clearance). The lower you go on the et the more you will have to start thinking about tyre stretching, adding negative camber and rolling the arches.

  • 2 weeks later...
what are chances of putting 19 X 10.5 with 275 35 on an ARX?

Whoa! With a low offset I suppose it could be done.

Will have a fair bit sticking out of the guards (although no where near as much as on an RS/RX).

Prepare for some tyre rubbing as well.

I would say that 9.5 is about as wide as you could comfortably go, with 9" wide probably being about right.

Edited by iamhe77

Hey guys read this whole post but i'm still confused

i want to get 19/8 with 245 or 265 if they will fit a 8" rim

What i need to know before i order them is what offset will fit a 97 S1 Rs4 with standard suspension

Edited by 25stagea
Hey guys read this whole post but i'm still confused

i want to get 19/8 with 245 or 265 if they will fit a 8" rim

What i need to know before i order them is what offset will fit a 97 S1 Rs4 with standard suspension

go roughly +20 offset and they will sit nice, pretty much the same as bnr34 wheels

Should have mentioned, 18x8" +8, 18x9" +7, 225/40s all round, on a S1 stag. Would be happy to roll lips flat but baulk at flaring. Opinions?

fronts will sit nice with a lipping of the guards (just the lip folded up)

depending on how low and the amount of camber you run, the rears will poke a little - not enough to warrant a flare of the guards with those tyre specs though (again get away with lipping)

i have read parts of this thread a few times and the whole time i thouht everyones numbers sounded too small an offset. so low and behold i finally bought tyres for my rims with my tax. my wheels are 18x8 +35 front and 18x8 +6 rear. the rears sit perfectly and my fronts require 10-15mm spacers. how is veryone happy with these +40 offsets??

  • 3 weeks later...

I'm looking at putting the following rims & tyres on my S2 RS Four S Stagea:

18' ENKEI 5 SPOKE 5/114.3 + HANKOOK TYRES

18 x 7.5 +38

225/40R18 HANKOOK TYRES

Will these fit my Stagea & can I get away without rolling my guards.

I'm currently running stock 17's.

I'm looking at putting the following rims & tyres on my S2 RS Four S Stagea:

18' ENKEI 5 SPOKE 5/114.3 + HANKOOK TYRES

18 x 7.5 +38

225/40R18 HANKOOK TYRES

Will these fit my Stagea & can I get away without rolling my guards.

I'm currently running stock 17's.

Those look pretty similar to my Nismo rims (18x7.5 +40)

They will fit easily.

The only way that they may cause a bit of difficulty is if you have big brakes on the front.

Edited by iamhe77
I'm looking at putting the following rims & tyres on my S2 RS Four S Stagea:

18' ENKEI 5 SPOKE 5/114.3 + HANKOOK TYRES

18 x 7.5 +38

225/40R18 HANKOOK TYRES

Will these fit my Stagea & can I get away without rolling my guards.

I'm currently running stock 17's.

No don't do it, they are too narrow and they will sit in way too much. I have 19 x 8.5 +20 offset rims on a S2 Type S Stagea. My car is lowered and I have had no guard rolling and I get no scraping at all.

You should go for at least 8.5 inch rims in about a +20 offset. Here is a pic of how my rims sit

post-39581-1249263565_thumb.jpgpost-39581-1249263603_thumb.jpg

Those look pretty similar to my Nismo rims (18x7.5 +40)

They will fit easily.

The only way that they may cause a bit of difficulty is if you have big brakes on the front.

this isn't always the case. brake clearance is determined by disk type, particularly in wheels with dish

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
    • Power is fed to the ECU when the ignition switch is switched to IGN, at terminal 58. That same wire also connects to the ECCS relay to provide both the coil power and the contact side. When the ECU sees power at 58 it switches 16 to earth, which pulls the ECCS relay on, which feeds main power into the ECU and also to a bunch of other things. None of this is directly involved in the fuel pump - it just has to happen first. The ECU will pull terminal 18 to earth when it wants the fuel pump to run. This allows the fuel pump relay to pull in, which switches power on into the rest of the fuel pump control equipment. The fuel pump control regulator is controlled from terminal 104 on the ECU and is switched high or low depending on whether the ECU thinks the pump needs to run high or low. (I don't know which way around that is, and it really doesn't matter right now). The fuel pump control reg is really just a resistor that controls how the power through the pump goes to earth. Either straight to earth, or via the resistor. This part doesn't matter much to us today. The power to the fuel pump relay comes from one of the switched wires from the IGN switch and fusebox that is not shown off to the left of this page. That power runs the fuel pump relay coil and a number of other engine peripherals. Those peripherals don't really matter. All that matters is that there should be power available at the relay when the key is in the right position. At least - I think it's switched. If it's not switched, then power will be there all the time. Either way, if you don't have power there when you need it (ie, key on) then it won't work. The input-output switching side of the relay gains its power from a line similar (but not the same as) the one that feeds the ECU. SO I presume that is switched. Again, if there is not power there when you need it, then you have to look upstream. And... the upshot of all that? There is no "ground" at the fuel pump relay. Where you say: and say that pin 1 Black/Pink is ground, that is not true. The ECU trigger is AF73, is black/pink, and is the "ground". When the ECU says it is. The Blue/White wire is the "constant" 12V to power the relay's coil. And when I say "constant", I mean it may well only be on when the key is on. As I said above. So, when the ECU says not to be running the pump (which is any time after about 3s of switching on, with no crank signal or engine speed yet), then you should see 12V at both 1 and 2. Because the 12V will be all the way up to the ECU terminal 18, waiting to be switched to ground. When the ECU switches the fuel pump on, then AF73 should go to ~0V, having been switched to ground and the voltage drop now occurring over the relay coil. 3 & 5 are easy. 5 is the other "constant" 12V, that may or may not be constant but will very much want to be there when the key is on. Same as above. 3 goes to the pump. There should never be 12V visible at 3 unless the relay is pulled in. As to where the immobiliser might have been spliced into all this.... It will either have to be on wire AF70 or AF71, whichever is most accessible near the alarm. Given that all those wires run from the engine bay fusebox or the ECU, via the driver's area to the rear of the car, it could really be either. AF70 will be the same colour from the appropriate fuse all the way to the pump. If it has been cut and is dangling, you should be able to see that  in that area somewhere. Same with AF71.   You really should be able to force the pump to run. Just jump 12V onto AF72 and it should go. That will prove that the pump itself is willing to go along with you when you sort out the upstream. You really should be able to force the fuel pump relay on. Just short AF73 to earth when the key is on. If the pump runs, then the relay is fine, and all the power up to both inputs on the relay is fine. If it doesn't run (and given that you checked the relay itself actually works) then one or both of AF70 and AF71 are not bringing power to the game.
    • @PranK can you elaborate further on the Colorlock Dye? The website has a lot of options. I'm sure you've done all the research. I have old genuine leather seats that I have bought various refurbing creams and such, but never a dye. Any info on how long it lasts? Does it wash out? Is it a hassle? What product do I actually need? Am I just buying this kit and following the steps the page advises or something else? https://www.colourlockaustralia.com.au/colourlock-leather-repair-kit-dye.html
    • These going to fit over the big brakes? I'd be reeeeeeeeaaaall hesitant to believe so.
    • The leather work properly stunned me. Again, I am thankful that the leather was in such good condition. I'm not sure what the indent is at the top of the passenger seat. Like somebody was sitting in it with a golf ball between their shoulders. The wheels are more grey than silver now and missing a lot of gloss.  Here's one with nice silver wheels.
×
×
  • Create New...