Jump to content
SAU Community

Recommended Posts

this isn't always the case. brake clearance is determined by disk type, particularly in wheels with dish

haha!

I thought I typed that... must have just thought it.

Big brakes would be no good with my wheels (LMX5 - 4-pot Brembos would probably fit, but nothing bigger), but my mates Work wheels (similar dimensions) are fine for 6-pot Endless calipers.

So yes, definitely agree that the design of the wheel plays a more critical role.

Those look pretty similar to my Nismo rims (18x7.5 +40)

They will fit easily.

The only way that they may cause a bit of difficulty is if you have big brakes on the front.

I only have stock brakes so it should hopefully be ok.

No don't do it, they are too narrow and they will sit in way too much. I have 19 x 8.5 +20 offset rims on a S2 Type S Stagea. My car is lowered and I have had no guard rolling and I get no scraping at all.

You should go for at least 8.5 inch rims in about a +20 offset. Here is a pic of how my rims sit

I'm not too fussed if they sit too far in for appearance sakes, as I want aftermarket rims more to dress up the Stagea a little better than stockies. Thanks for the advice though. And your rims look sweet :P

Edited by Hanso

One other thing you should worry about with a large offset like that is that your wheels don't rub on the inside of your guards when you turn your wheels to a full lock for a U-turn or similar.

I'm running 18x8 rims with a +30mm offset off a V35 Skyline, and using 245/40 tyres, and the wheels sit perfectly in the guards - the rear guards needed rolling simply due to the width of tyres I chose to run.

NewWheels5.jpg

NewWheels6.jpg

come on boys its gotta be a 9" +30 at a minimum, they fill out the rears perfect without sticking out and fronts they sit in a fair bit, could do with a 10mm or 20mm spacer to look better. My new wheels going on very soon once i get the tyres fitted are 18x10 +20 and they fit perfect on fronts and sit out on the rears but i have a solution for that in the works so should look alright, pics to come :whistling:

example of agressive wheel fitment :laugh: sit the same as my vs-kf

can i ask out of curiosity what wheels you are getting? i LOVE wheels haha

come on boys its gotta be a 9" +30 at a minimum, they fill out the rears perfect without sticking out and fronts they sit in a fair bit, could do with a 10mm or 20mm spacer to look better. My new wheels going on very soon once i get the tyres fitted are 18x10 +20 and they fit perfect on fronts and sit out on the rears but i have a solution for that in the works so should look alright, pics to come :whistling:

Hey Mike you have commented on previous posts i showed the wheels when i test fitted them a while ago but havent had a chance to chuck good tyres on them so the 33 gtr ones are on at the moment. Heres the only pics i got of them...

lmsonstagea-1.jpg

rearrims.jpg

coilovers arnt low in the pic of rears as i couldnt be stuffed lowering it at the time so they arnt tucking in as much

here is the 33 gtr ones too, fronts definately need big fat spacers to sit right

33gtrrims.jpg

^^^ ooo what did you get? :(

because you have an rs4-s you might have fouling issues on the rear depending how low and how much neg camber you run - an 8mm slip on spacer may be required to stop the wheel from rubbing the strut. don't forget that even if it just clears stationary that it will bang the strut over big bumps when the suspension compresses and you get a momentary gain in neg camber

i'd recommend running 235/40's on those wheels up front - might run into guard issues with a 245

my car with 18x9.5+15 up front and 235/40's on lipped guards

100_0600.jpg

here's petes rs4-s with 18x9.5+15 235/40 all round and an 8mm slip on in the rear

100_0667.jpg

100_0666.jpg

^^^ ooo what did you get? :(

because you have an rs4-s you might have fouling issues on the rear depending how low and how much neg camber you run - an 8mm slip on spacer may be required to stop the wheel from rubbing the strut. don't forget that even if it just clears stationary that it will bang the strut over big bumps when the suspension compresses and you get a momentary gain in neg camber

i'd recommend running 235/40's on those wheels up front - might run into guard issues with a 245

my car with 18x9.5+15 up front and 235/40's on lipped guards

100_0600.jpg

here's petes rs4-s with 18x9.5+15 235/40 all round and an 8mm slip on in the rear

100_0667.jpg

100_0666.jpg

Was waiting for your reply! lol

DTM rush in shadow. (Had 18x9.5 Volk GT-N lined up but 1x cracked face = steer clear!)

Went the +15 offset to clear rear strut, 7.5' +38 - 9.5' +15 = 2mm closer to strut?

Test fit Tonight and pics with Ribbons this weekend!!! (Tying the knot)

Was waiting for your reply! lol

DTM rush in shadow. (Had 18x9.5 Volk GT-N lined up but 1x cracked face = steer clear!)

Went the +15 offset to clear rear strut, 7.5' +38 - 9.5' +15 = 2mm closer to strut?

Test fit Tonight and pics with Ribbons this weekend!!! (Tying the knot)

yep, 2mm closer. just keep an eye on it, the 2 manual stageas that i've seen with similar wheel specs to yours had minor rubbing issues so both had 8mm slip on spacers fitted up

those wheels will look nice - be sure to get pics up.. even of the test fit tonight :(

and congrats on the hitch!

Amazing how a RS4-s just swallows rear offset over the auto model. (rear subframe, knuckles or control arms different?)

the factory manual rear subframe is ~50mm narrower than the auto version (so both 260rs and rs4-s)

the factory manual rear subframe is ~50mm narrower than the auto version (so both 260rs and rs4-s)

So does that mean 10' will fit. Does the strut move in that much?

Anyone got pics of the rear of a RS4 with 18x9 +25

They will sit out a further 5mm from my R34 gtr rims +30

Looking at buying a set of rays GT-c's

So does that mean 10' will fit. Does the strut move in that much?

Anyone got pics of the rear of a RS4 with 18x9 +25

They will sit out a further 5mm from my R34 gtr rims +30

Looking at buying a set of rays GT-c's

10" is achievable with an auto subframe - a 10+22 will sit the same as a 9.5+15. i've lent adam (chef_stagea) one of my sets of wheels with 10+22 rear specs and he needs to run an 8mm floating spacer (effectively making them a 10+14) to stop them fouling the strut because the hub is closer to the strut on a manual subframe

i'd not worry about trying to find pics of a 9+25, as you said it's only 5mm out from a bnr34 item - good luck being able to notice the difference from a photo :P

Looks good, but not sure if I want the rears to hang that far out.

I have no more inner clearance on the rear with the 18x9 +30 I have now.

The new bilsteins (sydneykids) I have in there hit the 245/40/18 tyres. If I lower it any more. currently around 335-340mm. Not happy.

well here's a pic of adams car (260rs) that i mentioned earlier to put in to comparison with the above pics, if it helps at all?

17x9.5+24 17x10+16 (+22 with 8mm spacer) and 225/45's all round

Adam_260_3.jpg

Edited by M I K E

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...