Stagea Wheel Dimensions?

[4bidn1]

You will have no problems with the attessa ive run diff widths front and rear with many rim combos on diff stags never a prob

[pipster11]

yeah tires will be fine

spacers are illigal in some states

i wouldnt worry about the 8mm on the rear, just run a bolt on up front

or get the gktech spacers that come with bolt and slip ons to get the perfect offset

[PTR_RS4]

Thanks guys for the help, I guess I will look into running spacers on the front rims.(only coz I can't afford 1k for new rims right now)..with the 17x9+38 on the rears I prob have like mayb 5-10mm space between strut and inside tyre wall, so not sure if its worth the extra $200 to shift the rim 8mm outwards lol I guess I will try to find out if spacers are illegal in WA before i do anything , thanks again

[PTR_RS4]

Ok, so i spoke to my local Ttf store and they suggested that 235/45/17 tyres would be good on a 17x8 rim as on the 9" rim they are stretched and that's bad for traction/handeling in awd? Does offset change if I go down to a 8inch rim? Cheers

[beastien]

I'm looking at wheels in the following sizes, 18 x 8.5 +30,+38 or +47

18 x 9.5 +12, +20, +30 or +38. What would be the best size or sizes for a S1 RS4V?

[pipster11]

18x9.5 +12 or +20 front

the same on the rear but probably +30 (auto rear cradle is wider than the front)

[BMX666]

Just wondering if someone with an rs4s can confirm with certainty that 18x9.5 +12 running 245/40's will clear BC Coilovers without any drama. Thanks.

[Andyau]

Ok last night had the best idear and put some 20X11 + 13 on the rear of my m35 axis but even with the 6 deg of camber I got its still going to need a little bit of guard work

Not 100% about using that 11" wide as don't think there is anyway I would get them on the other end

[joshm35]

found these on boost cruising

http://www.boostclassifieds.com.au/advert/2153108-Work-Meister-S1-Geniune-19x10-46-Dish-for-Sale.html

[Brick]

found these on boost cruising

http://www.boostclassifieds.com.au/advert/2153108-Work-Meister-S1-Geniune-19x10-46-Dish-for-Sale.html

Shame thats just for two

[PN-Mad]

225 on a 10 inch rim..... Lol.

[Andyau]

Ok need help working out wheels for my m35 axis

Looking at 20" in a 9.5 or 10"

So lets say 20x9.5 -55 on the rear dose this sound to crazy??

[joshm35]

All 4 would have to be the same bud unless you remove the attessa fuse and front driveshafts.

[Andyau]

It just need to be the same contact patch on the road? As I am running 18x8 -32 on front and 18x9 -38 and haven't had any probs

The offset isn't going to be a prob is it? As it will be flush or very close to it

[scotty nm35]

It needs to be the same outside diameter or the clutches will load up. I think the manual states within 1.5% which is essentially varying tread wear.

[Andyau]

Ok ATM I have 225 tires on both the 8 and the 9" wide rim both 45 profile

So if I keep my rolling diameters the same I should be sweet??

[joshm35]

Id like to think so.

[joshm35]

Didnt you say in the other post you have a wobble in rear end. Could tyre width have something to do with it?

Ok ATM I have 225 tires on both the 8 and the 9" wide rim both 45 profile

So if I keep my rolling diameters the same I should be sweet??

[Andyau]

Didnt you say in the other post you have a wobble in rear end. Could tyre width have something to do with it?

I had the rims on there for the last year and a bit the wobble is new

[scotty nm35]

It's pretty easy to prove if Josh is correct, can you try a matched set of tyres?