Jump to content
SAU Community

Recommended Posts

post-20653-1188121213_thumb.jpg Here's my install,

Just a R34 GTT Monsta kit, with some stuffing around with the passangers side piping (had to use the old intercooler to intake pipe with about 1.5" & the big 90 degree bend off the intercooler with the insulation stripped off. You've got to cut a hole under the battery tray, but if you measure & cut it carefully it looks factory. Plus i had to trip the reo bar about 3/4" at the bottom to clear the end tanks as the core is too thick & hits the AT cooler (Series 2)

I don't need an interccooler that can handle 10,000,000hp, I'm only after around 300Kw so I didn't see the point of spending my hard earned cash on something i just won't use. So after weighing it all up, you just can't go wrong for $300 delivered!

  • Replies 254
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • 4 weeks later...

I've yet to see a cooler with this layout, so no, I can't say I have.

I do know that these style intercoolers exist (albeit rare), but I personally haven't seen it applied to a Stagea yet, nor seen one that may suit the job.

Has anyone else fitted a cooler with both ends on the same side of the cooler? seems alot easier to run piping straight up rather than up and across from the other side from what i can gather

pwr on the goldcoast make a i/c with inlet & outlet on the same side, it costs approx $800 without piping & seems a bit heavy (weight wise)

i have just fitted a greedy type m to my s1(hole under battery etc etc,)

Has anyone else fitted a cooler with both ends on the same side of the cooler? seems alot easier to run piping straight up rather than up and across from the other side from what i can gather

G`day i have order core 400x300x100mm will have same end fitting`s as i don`t want to cut hole.plus i need space for tran`s cooler`s.not sure of cost yet ???.when i find out cost,i will post it if that any help.chuckie.

Has anyone else fitted a cooler with both ends on the same side of the cooler? seems alot easier to run piping straight up rather than up and across from the other side from what i can gather

Just about to attempt an R33 ARC intercooler fit to a S2, same side return, expecting a tight fit where the 2 pipes pass into the stock intercooler area, will post pics if a success. Have heard its an easy job with S1s, but I feel the S2 bumper is more restrictive with space.

Lee, sorry for going OT but I like your eyelids for your car, where did you get them? And why do you have mesh over your licence plate?

I'm thinking for simplicity sake, a R34GTT SMIC and water spray kit is going to be the way to go for our Stag. I can't imagine my wife letting cut up the front bar of HER Stag!!!

Cheers, Greg.

I also noticed the mesh... looks freaken weird... what on earth is it for? My only guess would be to prevent red light cameras getting a good shot if it is shooting from an angle.

I'm certain there are laws against objects obstructing the plates, I'd be careful if I was you as you might end up copping a fine for that instead.

I also noticed the mesh... looks freaken weird... what on earth is it for? My only guess would be to prevent red light cameras getting a good shot if it is shooting from an angle.

I'm certain there are laws against objects obstructing the plates, I'd be careful if I was you as you might end up copping a fine for that instead.

lol :laughing-smiley-014: ........ i thought the mesh would get a few comments. after my wife has just purchased personalised plates i decided that i no longer liked my shitty standard ones. i'm definitely going the thinner personalised plates myself. ps. the mesh was just for the photo.

leigh

I just got a FPV Typhoon cooler I'm hoping to run the piping back through the smic holes..... when my car gets here. It's not huge, core measures 175h x 370w x 55d. I'm never gonna be chasing over 200rwkw though, and it cost me bit over $100.... piping shouldn't cost too much to get made up should it? post-29840-1190763699_thumb.jpg

Edited by timheather

looks good chook, did you retain the factory piping in the engine bay from the factory cooler? or was this replaced as well.

How much was the kit if you dont mind me asking, I assume it would fit a S1 stagea also..

cheers

nothing was touched in the engine bay, pipes went into the factory rubber hoses. Ive heard from another member who fitted one to a S1, no problems as well. I got mine in the classified section privately, but new cond, for $900, not cheap these days for an IC, but you pay for quality and ease of fitment. ie, rather not spend days getting pipes made up to fit.

http://www.nengun.com/arc/intercooler-front-mount

Edited by chook

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...