Jump to content
SAU Community

Recommended Posts

well i know the new style bi-xenon's are actually all in 1 projector. Basically, when the normal lights are on, the hi-beam is actually on as well, but shielded. But if you need to flick to hi-beam, it's ready to roll as the hi-beam is already on... it's just the shield that moves.

So basically hi-beam and lo-beam is on at the SAME time, it's just the hi-beam is always shielded when not needed.

From the look of your pics, you have 2 projects, 1 hi-beam, 1 lo-beam?

unfortunately i'm not handy enough to be retro-fitting Xenon projectors to my R34 headlights, although i wish i was. I'd prob have to source another set of R34 lights if i did even want to attempt it, as i'd imagine it would take me a while :rant: Would love to to do it though.... does change the front look of the car quite a bit though.

Does honda have a bi-xenon option? or would i have to get some new BMW/Merc/Audi bi-xenon projector?

well i know the new style bi-xenon's are actually all in 1 projector. Basically, when the normal lights are on, the hi-beam is actually on as well, but shielded. But if you need to flick to hi-beam, it's ready to roll as the hi-beam is already on... it's just the shield that moves.

So basically hi-beam and lo-beam is on at the SAME time, it's just the hi-beam is always shielded when not needed.

That is correct, there is a solenoid which operates and moves the shield out of the way giving the full xenon lamp unshielded for full beam! :)

From the look of your pics, you have 2 projects, 1 hi-beam, 1 lo-beam?

No, I have 4 x Bi-Xenon projectors, as in all 4 on for lo and hi beam!

Engine20.jpg

*** Ignore the sidelights, that was just a trial fit! ***

unfortunately i'm not handy enough to be retro-fitting Xenon projectors to my R34 headlights, although i wish i was. I'd prob have to source another set of R34 lights if i did even want to attempt it, as i'd imagine it would take me a while :rant: Would love to to do it though.... does change the front look of the car quite a bit though.

Does honda have a bi-xenon option? or would i have to get some new BMW/Merc/Audi bi-xenon projector?

I chose the Audi units because they are Bi-Xenon and because they are made by Hella and therefore fit most headlight units, the BMW ones don't fit in the R33 headlight units (Bi-Xenons that is). As for the Honda units, I don't know to be honest, it wasn't an option available to me at the time.

Edited by Matt J

that is INSANE!!!!!!!! 4 bi-xenon projectors!!! you MUST put up some night time pics when you get the chance....

you must blind everything within 50km's of your car in a 180 degree arc :cool:

that is INSANE!!!!!!!! 4 bi-xenon projectors!!! you MUST put up some night time pics when you get the chance....

you must blind everything within 50km's of your car in a 180 degree arc :cool:

I'll take some pics early Feb when I get home.

They are bright but still road legal on lo beam, on high beam... they are just AWESOME!

Very rarely get other road users complain about the brightness - only time I get flashed is when going up hills etc when the shield cutoff falls or rises into oncoming drivers, oops.

That is correct, there is a solenoid which operates and moves the shield out of the way giving the full xenon lamp unshielded for full beam! :P

No, I have 4 x Bi-Xenon projectors, as in all 4 on for lo and hi beam!

Engine20.jpg

*** Ignore the sidelights, that was just a trial fit! ***

I chose the Audi units because they are Bi-Xenon and because they are made by Hella and therefore fit most headlight units, the BMW ones don't fit in the R33 headlight units (Bi-Xenons that is). As for the Honda units, I don't know to be honest, it wasn't an option available to me at the time.

heard about abbey motorsport do some wicked GTR............is you one making 550 plus HP......ohhh....mad ass lights tooo

heard about abbey motorsport do some wicked GTR............is you one making 550 plus HP......ohhh....mad ass lights tooo

Mine is a hand built 'Top Secret' tuning Japan/HKS 2.8 engine with HKS T04Z and OS Giken 6 speed sequential, all the work (engine fitting, fuelling and tuning) was carried out in the UK by Abbey Motorsport - just shy of 600BHP ATW at the moment.

Thanks, I made the lights because the standard halogen units are vey very poor at night!

Mine is a hand built 'Top Secret' tuning Japan/HKS 2.8 engine with HKS T04Z and OS Giken 6 speed sequential, all the work (engine fitting, fuelling and tuning) was carried out in the UK by Abbey Motorsport - just shy of 600BHP ATW at the moment.

Thanks, I made the lights because the standard halogen units are vey very poor at night!

Twin turbo Light house........hell not bad at all.... :)

have you guys who put xenon projectors into non-projector headlights (eg. R33) used a trim bezel or make a fibreglass surround?

got some close up pics of them with the lights off?

i take it all you boys from the UK found this thread from here?

http://www.gtr.co.uk/forum/upload/67640-ga...gtr-revamp.html

have you guys who put xenon projectors into non-projector headlights (eg. R33) used a trim bezel or make a fibreglass surround?

got some close up pics of them with the lights off?

i take it all you boys from the UK found this thread from here?

http://www.gtr.co.uk/forum/upload/67640-ga...gtr-revamp.html

Yeah mate followed the link^^^

Never bothered with any bezels, I just gutted the halogen lights and rebuilt them with the Bi-Xenons.

I played around with bezels at the time but they looked much better without them so I left them off.

Not that it would be a massive job to fit bezels though.

I'll post some close up pics when I return to the UK....

  • 5 weeks later...

well here's how they look on the car.

i reckon they look like S2000 headlights a bit now.

I'm a bit worried that when they were assembled the cut off shield was put in upside down (ie. across the top of the projector instead of at the bottom of the projector), so the light once cut off and reversed by the convex lens allows light at the top and not bottom... (if that makes sense).

Will test them out and see if they've been done right soon...

med_gallery_1486_103_180477.jpg

med_gallery_1486_103_576044.jpg

med_gallery_1486_103_49037.jpg

med_gallery_1486_103_55558.jpg

med_gallery_1486_103_450987.jpg

wegs, seriously do a search man. I've done like a hundred threads on it. It'll be gay. that's it.

ronin, i'm not sure what you mean by havin gthe cut off shield across the top. If it is how I think it'll be, your light will be up, and the cutoff will be down the bottom, so it'll be reversed. THAT IS, if it is mounted how I think it is.

Cheers

MANWHORE,

remember that the lens flips the image upside down; like your eyes (your brain then reverses the signal from your retina so that it looks right-way-up).

So, if the cut-off shield is at the top of the assembly, the light is released at the bottom, then switched upside down by the lens and light will come out the top only.

Similarly, if the cut-off shiled is at the bottom, the light is released at the top, switched by the lens, and only light is released at the bottom (correctly.

I think we've put it together the right way :)

  • 1 month later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
×
×
  • Create New...