Jump to content
SAU Community

Recommended Posts

Ok guys can you guys tell me about the do and donts about driving in the yet with the cars we drive e.g skylines 180sx

i have a tx5 telstar hahah old 87 and it shits me driving in the wet no control loss of traction very quickly hard to brake with out skidding hehe going at a normal speed my cars suspension is stuffed one

and iam scared when i get my 180sx the problems i might have when driving in the yet?

what have you guys learned about it

is there anything you can do to reduce accidents etc in the yet?

Thanks for your help Cheers

Link to comment
https://www.sau.com.au/forums/topic/9516-driving-in-the-wet/
Share on other sites

  • Replies 40
  • Created
  • Last Reply

Top Posters In This Topic

get GOOD tyres... none of this $180 17" crap.

DONT put your foot down around corners, it goes like this.

no boost.. no boost.. BOOST.. SLIIIIIIIIIIIIIIIIIIIIIIIDE.

its good fun when you want it to be, but when there's other traffic around, kerbs and its unexpected .. :eek:

always drive with caution, just get it into your mind everyone is a retard and anything can happen, especially like the above.

and keep your distance.

Shaun

Link to comment
https://www.sau.com.au/forums/topic/9516-driving-in-the-wet/#findComment-144390
Share on other sites

It can be great fun, but you have to know when to control it.. and not when there are other cars around - then at least if u f. up its just your car you have to fix up.

I've found if i've ever gone into a braking skid (pretty easy in the wet in any car) or thought i haven't been able to stop before i run up the ass of somebody, generally pumping the brake can work. In other words, don't just slam the brake full down or you'll just keep skidding until the car decides to stop. Brake, then let go, then apply brake again, then let go, etc increasing the foot to the floor each time. Do it rapidly, but not too rapidly and it will make a difference. Eventually you will stop a lot quicker and avoid skidding as the "slam, oh shit" method. It kinda like ABS except if u don't have it (like me) you've just got to do it via foot control :D Try it sometime on an empty stretch of road.

My tip for the day (and how appropriate considering its been raining in melb today!)

Link to comment
https://www.sau.com.au/forums/topic/9516-driving-in-the-wet/#findComment-144559
Share on other sites

btw: if you can feel the car going sideways in the wet (not always obvious) after flooring it a bit too much, just ease up on the accelerator and generally it will straighten itself up.

Don't panic and start trying to fight it with the steering wheel, that will lead to much badness and probably sliding across the road into somebody else.

I've done it at 80km/hr once in an old car...could have led to a bad accident but the only thing that saved me was not panicking and letting the car straighten itself rather than me wrenching the wheel this way and that.

Link to comment
https://www.sau.com.au/forums/topic/9516-driving-in-the-wet/#findComment-144561
Share on other sites

Originally posted by Mick Trainer

Do an advanced driving couse so that you learn greater car control, including breaking techniques.  Also as said above nothing other than the driver is as important to your car than good tyres.  And I mean good not just new.

Mick.

:werd:

The best thing anyone can do.

Leave bigger gaps between you and the car in front. Who cares if someone overtakes you. It's all ego.

Link to comment
https://www.sau.com.au/forums/topic/9516-driving-in-the-wet/#findComment-144596
Share on other sites

Well Dragon, make sure your next car is 4WD and has ABS, as well as good tyres with an open tread design.

A lot of people think 4WD is only for traction in first gear, but there is a lot more to it than that. 4WD offers far more grip in wet and slippery conditions during cornering, braking, and acceleration, at any speed. Also there will be less tyre wear.

Just one little prang can ruin your whole day, and keep you poor for a very long time.

Link to comment
https://www.sau.com.au/forums/topic/9516-driving-in-the-wet/#findComment-145963
Share on other sites

No I have never driven an ATESSA equipped 4WD in the wet, but I can imagine that with a lot of power available, anything could be made to break traction and be pretty hairy if provoked.

I have owned a WRX and Laser turbo 4WD, and have driven several other (not my own) full time 4WD cars. Driven sensibly, they offer a lot more safety and stability than 2WD (company) cars I have driven.

Link to comment
https://www.sau.com.au/forums/topic/9516-driving-in-the-wet/#findComment-146021
Share on other sites

Ok two points.

A well trained driver is better than all but the best ABS systems. When people come to us to do a driving course we will pull the fuss on the ABS and teach them to drive. Without too much work they will beat their braking distance. If they then continue to practice the technique and get conditioned too it they will be able to do it in day to day driving. An example of this was in a recent test day we did with one of the first Falcon's that had ABS we were pulling the car up 9 feet shorter without the ABS than with it. Train yourselves to break. Practice it. Make it automatic and you will be a better driver. Any truly good driver is contantly and actively thinking how to improve their driving.

Secondly I own a GTR with 240rwkw and in the wet I gan give it all it has got in second gear and not break traction (well not very much anyway). Do that in a rwd car. The 4wd does make a massive difference. It is very flatering to your driving making you seem much better than you are.

Mick.

Link to comment
https://www.sau.com.au/forums/topic/9516-driving-in-the-wet/#findComment-146079
Share on other sites

as the others have said...drive sensibly...bigger gap between you and car in front...ease it around corners, brake until it locks then back off and brake again...

how about a skid pan day? that should be ok to get used to the car in the wet.

Being scared of the car is better than being over confident with it IMO.

Link to comment
https://www.sau.com.au/forums/topic/9516-driving-in-the-wet/#findComment-146087
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...