Jump to content
SAU Community

Recommended Posts

Goods valued less than 1000 will not be taxed if the items are sent via post - see the stickied thread in the 'Imports' section for a link verifying that.

There are plenty of Nengun threads around. In short, they are reliable, well priced, and have access to a great variety of parts.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/2/#findComment-1871505
Share on other sites

  • Replies 343
  • Created
  • Last Reply

Top Posters In This Topic

Nengun couldnt follow my clear instructions with a large amount of parts and consequentally cost me $1100 in taxes...

A mate who ewnt with greenline for similar stuff, had no problem.

I'd go with greenline, i sure will be from now on

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/2/#findComment-1871587
Share on other sites

Ash, are you blaming nengun for not helping you evade taxes? or did they mark items incorrectly causing higher taxes and duties to be paid than usual?

There's a difference, as you can't blame a business for not helping you break the law.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/2/#findComment-1871639
Share on other sites

I have ordered twice from Nengun (2nd time on Saturday just gone)

never had a problem, but then again I didn't have any specific requests

and my first delivery of a steering wheel took a while, but I expected that coming from japan

At least they have a wide range :P

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/2/#findComment-1871800
Share on other sites

Ash, are you blaming nengun for not helping you evade taxes? or did they mark items incorrectly causing higher taxes and duties to be paid than usual?

There's a difference, as you can't blame a business for not helping you break the law.

Technically when the parts are all purchased separately. Then should be sent separately no?

Any goods under $1000 are exempt from duties... and those parts should have been sent weeks apart from each other.

Not arriving in two massive boxes the same day.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/2/#findComment-1871804
Share on other sites

Any goods under $1000 are exempt from duties...

this is good to know, as i was told it was around $300-$400

i cant belived people wait up to 4weeks for your parts, i order shit off yahoo auction all the time takes about a week (or less) to get to my dude in japan then 5days to get to me,

on that note, does anyone know if items on nengue and similar site have jap tax on them or are they like yahoo auction and dont have the jap tax

cheers michael :D

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/2/#findComment-1871992
Share on other sites

No goods imported through international companies are exempt from import charges (stamp duties or GST) no matter what the cost. If the item is subjected to a customs bill then the following will occur:

  • less the AUD$1000 you will be charged 20% off the invoice when you collect the item from the post office. You will receive a parcel collection notice.
  • However if the package is above $1000 will need to formally declare the products and fill in a serious looking document. However you can also pay a customs broker do this for you, approximately $100. You will receive a letter via resisted post.

The cost is calculated according to the conversion rate on the invoice date.

These costs just come with the territory, alway budget for the extra 20% but if you’re not hit with a customs bill then go buy a carton of piss. :D Please also be aware that that it is illegal for a business to make a fake invoice (removed items, reduced costs & marked as a gift) for import purposes. Doing this is a criminal offence and the federal government can charge you.

If you are charged import costs remember it is not the fault/responsibility of the company you purchased the goods from. They usually have a disclaimer when importing informing you of the potential charges, so don't be surprised if you are get a bill.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/2/#findComment-1872201
Share on other sites

Technically when the parts are all purchased separately. Then should be sent separately no?

Any goods under $1000 are exempt from duties... and those parts should have been sent weeks apart from each other.

Not arriving in two massive boxes the same day.

According to customs, it doesn't matter:

http://www.customs.gov.au/site/page.cfm?u=5549

Note: However, where there are multiple packages to the same addressee in Australia from a single consignor overseas that arrive at about the same time, then the value of all packages will be combined for duty and tax assessment purposes.

:)

I wonder when this new $1000 or less thing came in, because I got hit for duty/taxes on an item in October last year after they accepted a value of ~$300.

Just remember, even if the item is declared below $1000, doesn't mean they won't ask you to prove the item/s are worth $1000 (inc. shipping costs, etc).

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/2/#findComment-1872459
Share on other sites

This kind of Internet business is fine. The problem arises when terms (including customs duty and taxes) are NOT CLEARLY specified on the suppliers web page and the supplier has made efforts to avoid taxes such as marking items as samples/gifts etc...

You are the one taking the chance with customs. If they don't check it, good for you, if they do, pay up. But you as the consumer need to be aware of this when you purchase the goods and you also need to be informed of the cost of the duty/tax incurred before you make the purchase. If you are not informed, the supplier is liable.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/2/#findComment-1872732
Share on other sites

I have used nengun a number of times and have paid tax on the occasional shipment.

You are legally obliged to pay duty and tax on all imported goods but if the item value is over $1000 then you are required to complete an import declaration for customs as well as be a registed client in the customs system (have a CCID).

To speed the process up you have the option of using a customs broker in this event and the cost for doing this is around $65 ive found.

Overall I've spent thousands of dollars at Nengun and would do it again tomorrow if I needed too. The parts arrive quickly, well packaged and about as cheaply as possible.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/2/#findComment-1872786
Share on other sites

You are legally obliged to pay duty and tax on all imported goods but if the item value is over $1000 then you are required to complete an import declaration for customs as well as be a registed client in the customs system (have a CCID).

That use to be the case with regard to taxing items of less than $1000, but it seems to have changed: http://www.customs.gov.au/site/page.cfm?u=5549

All goods (except for tobacco products and alcoholic beverages) may be imported duty and tax free if their value is $1,000 or less.
Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/2/#findComment-1872807
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • That is way more science than even I would use. I just eyeball it, not even accounting for the non-verticality of the tape measure when held on the lip and the centre at the same time. +/- 2mm is good enough for the girls I go out with.
    • So, before putting them in I need to understand the stock ride height. This is how I measured it: First, check the diameter of the wheel's centre cap, it was 52mm. Then put a piece of masking tape approximately across the centre and measure 27mm (half) from at least 3 sides to get a reasonable idea of the centre of the wheel cap. Mark that with a horizontal line as one measuring point. Then, directly above the wheel on the guard, put another piece of masking tape in approximately the centre. Use a string line to find out the point on the guard above the centre of the wheel cap and mark that. Then it is simple, just a tape measure to check the distance from centre of the wheel to the centre of the guard. Final results where  LF: 381mm RF: 379mm LR: 401mm RR: 400mm Pretty even considering they are 120,000klm old factory springs, lets call that 380 front and 400 rear.
    • So....knowing that I have a problem with power steering temps on track and another Wakefield day booked in next Friday, I've done the obvious thing They are very reasonably priced at $1650, considering they are a big monotube shock, double height adjustable (don't have to change pre-load to change ride height), one way adjustable damping and standard sized and customisable springs if you want something other than what comes with them. They come with 9kg/mm front and 4.5kg/mm front and I went with that as a starting point because I'll add adjustable sway bars too https://justjap.com/products/bc-racing-coilover-kit-ds-ds-infiniti-q50-v37-14-current#description Unfortunately they didn't come with rear strut tops so I've re-used the factory ones which was a bit of a pain. Also, the adjuster for the rear shock will be an absolute nightmare to get at, and while there are extensions in the kit I can't see any way you can actually attach or use them
    • I also had 2 bulbs blow at once, years ago in the stagea. made for a fun drive home. The issue was the voltage regulator had failed in the alternator and it was giving 15+ volts. Really, I was lucky all that was fried were the headlight bulbs. So, I'd suggest you check the voltage across your battery terminals with the car running and warmed up. Yes, you will need a multimeter to do so, sorry.
    • Good work to think to check that, and thanks for coming back to post up the outcome.
×
×
  • Create New...