Jump to content
SAU Community

Recommended Posts

I wouldn't breathe too easy just yet either. Customs have 5 YEARS to back date records and request payment for goods imported. Which means that anytime in the next 5 years you may recieve a notice for payment which you will not be able to avoid or contest.

And rest assured Customs HAVE been known to chase duties owing years down the track.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1872958
Share on other sites

  • Replies 343
  • Created
  • Last Reply

Top Posters In This Topic

Yes,

There is laws and info for this.

http://www.customs.gov.au/

AT THIS STAGE I WOULD LIKE TO POINT OUT THAT THIS IS NOT DIRECTLY CONCERNED WITH NENGUN PERFORMANCE ONLY. THESE POSTS ARE INTENDED TO INFORM YOU CONSUMERS OF THE LAWS AND ALSO INTERNET SUPPLIERS OBLIGATIONS TO YOU. BY INTERNET SUPPLIER I MEAN ANY BUSINESS WHO TAKES ORDERS AND PAYMENT OVER THE INTERNET AND SHIPS THE GOODS DIRECTLY TO YOU FROM OVERSEAS.

I hope this clears up a lot of grey areas for people buying parts of internet suppliers.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873063
Share on other sites

Well anyway, Ive ordered a couple of times from nengun.. took about 3 weeks to get some apexi pods etc. This time I ordered a *huge* quantity of air filters... ie one.. which is out of stock apparently, paid for 3 Dec and still waiting til the 25th Jan or thereabouts to receive it.

Apart from this delay, had no issues thus far, was very happy with the last order.

I have heard that Greenline are a bit cheaper though... but nengun is much easier to impulse buy :)

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873140
Share on other sites

Well anyway, Ive ordered a couple of times from nengun.. took about 3 weeks to get some apexi pods etc. This time I ordered a *huge* quantity of air filters... ie one..  which is out of stock apparently, paid for 3 Dec and still waiting til the 25th Jan or thereabouts to receive it.

Apart from this delay, had no issues thus far, was very happy with the last order.

I have heard that Greenline are a bit cheaper though... but nengun is much easier to impulse buy :)

It is quite easy to compare prices for gear between Nengun & Greenline. Obviously then you go to whomever is cheapest as both have a good reputation. Not rocket science, really. For the stuff I ordered Nengun happenned to be cheaper. :)

I recently ordered a few grands worth of gear through Nengun & it all arrived - the only slow stuff was because there was no stock with the suppliers. It arrived without customs duty - possibly something to do with the way it was marked up on the packaging...

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873227
Share on other sites

i ordered a power fc and a short shift kit and i didnt pay any tax.

it took a few weeks and i didnt get a short shift, i got a replacement shifter. was no shorter than the stock one, we compared it to mine and my mates gtr as well. Nengun pretty much told me to get stuffed so i haven't bought any more stuff from them.

The power fc was good tho and only like $900. so with the money i wasted on the shifter i could have bought the pfc in a shop here and had it right away.

Edited by RRR32_GoDzIlLa
Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873336
Share on other sites

Which Short Shift kit did you buy?? Because the length of the shifter isnt any different, it's the throw and the distance between gears that changes when you fit it. The Nismo ones even look like standard Nissan ones.

Either way, it should have come in a Nismo or C's Box (Depending on which one you bought) so if it was out of the box I'd be questioning if it's even a new shifter.

I suggest you fit it and see if there is any difference in the throw. If it's still the same length throw then you've been supplied a 2nd hand std shifter and I'd be going to the ACCC to find out if there is any recourse for you. Don't let this go mate. You payed for the product and he has an obligatino to supply it to you.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873535
Share on other sites

I've always found Nengun to be the cheapest on average, followed very closely by Greenline. But anything I've ordered from Greenline has come within 2 weeks after payment has been confirmed, Nengun takes a little longer.

I've ordered a few bits and pieces from Greenline and also Perfect Run and have never been hit with customs duty on things under $1000 or had to fill anything out for something that I ordered >$1000. None of these items were marked as a gift. So did I get lucky or can I expect a letter within the next 5 years?

"The internet? Is that thing still around?"

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873568
Share on other sites

Which Short Shift kit did you buy?? Because the length of the shifter isnt any different, it's the throw and the distance between gears that changes when you fit it. The Nismo ones even look like standard Nissan ones.

Either way, it should have come in a Nismo or C's Box (Depending on which one you bought) so if it was out of the box I'd be questioning if it's even a new shifter.

I suggest you fit it and see if there is any difference in the throw. If it's still the same length throw then you've been supplied a 2nd hand std shifter and I'd be going to the ACCC to find out if there is any recourse for you. Don't let this go mate. You payed for the product and he has an obligatino to supply it to you.

yes that is what i meant. there is no difference in the length between gears. it is a nismo, apparently. i did fit it and take it back off again

Edited by RRR32_GoDzIlLa
Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873663
Share on other sites

I have used both Greenline and nengun.

Both were fine to deal with. No problems, no hassles. Once payment was confirmed, parts arrived within the month (usually earlier).

I guess it depends if they have the parts in stock as to how quickly it gets to Aust.

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873671
Share on other sites

I like Greenline better than Nengun as they are quicker etc... but whoever you order from make sure to ask if they have it in stock before you part with the cash as it is not usually Greenline/Nenguns fault when things are held up... they are simply waiting for their suppliers to send the parts

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1873796
Share on other sites

if they screwed you over with the short shifter and refused to fix the problem up for you, tell them that you're a member of SAU, a site they sponsor, and im sure they'd understand that in their line of business word of mouth is the majority of their advertising, and bad feedback from you for example on SAU wont help their cause :D

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1874440
Share on other sites

if they screwed you over with the short shifter and refused to fix the problem up for you, tell them that you're a member of SAU, a site they sponsor, and im sure they'd understand that in their line of business word of mouth is the majority of their advertising, and bad feedback from you for example on SAU wont help their cause :D

i had a go at em and sent em plenty of e mails and they said -

Apologies for the delayed response. The unit shipped to you is the Nismo

product number 32839-RN595. This is as provided by Nismo sold on the

domestic market here in Japan. The product information reports a 30%

shorter throw than the standard shifter.

As agreed to on the website when placing your order, we encourage you to

confirm all product details with your mechanic/tuner before purchase.

Thanks,

Alan

Link to comment
https://www.sau.com.au/forums/topic/102081-nengun/page/3/#findComment-1874465
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • New CAS just turned up from NZ Wiring. Looks like a nice bit of gear.  So, yeah. Triggered, bro. Realised I may as well do the cam belt while mucking about with it so will order one of them.
    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
×
×
  • Create New...