Jump to content
SAU Community

Recommended Posts

I'm talking anything.

I'm sure there would be a couple of tube 350zeds over in the states running 6's by now.

The Zs are VQ series - the drag ones do not have RB motors dropped into them, though there are a couple in the build that I am aware of over there. Aren't Rigoli's building a RWD drag one as well?? There is a RWD tube frame drag car based on an RB30/26 hybrid in NZ at the moment as well.

The fastest would have to be the old HKS S13 with the RB26, did a low 7 if I remember rightly... years ago.

You've been under a rock for a month? :no: HKS got chopped by Reece in the 32 GTR :)

Ummm my rock is particually comfortable... My bad...

I'm talking anything.

I'm sure there would be a couple of tube 350zeds over in the states running 6's by now.

There is a 6 second 350z in the states but its not an RB... Its not really a 350z either its basiclly a top door slammer, tubular body with a fibreglass shell over it... It has a massive blower hanging out of the hood which is a dead give away that it is certainlly not an RB. You will generally find a big block V8 under those shells...

  • 2 months later...
I know of a 350z in the states with an rb26 with twin t67's, pro rwd tube car running 7.1 at 189 ish mph

its doesnt run sport compact

there are only 3 cars running in NHRA sport compact and NOPI and all 3 are 2j powered, if you cant run in the 6.4 region, you may aswell not show up

its doesnt run sport compact

there are only 3 cars running in NHRA sport compact and NOPI and all 3 are 2j powered, if you cant run in the 6.4 region, you may aswell not show up

OMG did anyone ask about 2j powered cars or sports compact

Incase you didn't notice this is a skyline forum and at a wild guess we are partial to RB power, speaking for myself and I'd say 2/3 the forum we don't give a stuff about you, your car or 2j/1j power especially when your record holding 1j times aren't as fast as the Rb25 times posted in that other thread

It maybe a little harsh, but 1JZ.747 comments are almost always somehow related to toyota/toyota motors with some bagging of RB motors whether direct or indirect.

I wonder if there are similar people on toyota forums who do the same thing?

OMG did anyone ask about 2j powered cars or sports compact

Incase you didn't notice this is a skyline forum and at a wild guess we are partial to RB power, speaking for myself and I'd say 2/3 the forum we don't give a stuff about you, your car or 2j/1j power especially when your record holding 1j times aren't as fast as the Rb25 times posted in that other thread

you cut me deep, real deep GET SET

PRO RWD is a term used on sport compact racing not conventional forms of drag racing. he used the term PRO RWD. hence why i made the comment there are only 3 cars running in PRO RWD and none of them are RB powered, so old mate gtr88 may have mistaken his info.

at this point in time there is one street tired RB25 in this country faster than me and thats ryan quinn at 10.12 and 136 mph, so pound for pound me with no motor work aint bad at 10.17 and 137 mph at 3500 pounds.

i come on this forum and post in the drag racing forum as there are plenty of like minded guys, ie, twoogle, 2rismo, buster, who we all race against each other and have great friendships.

i couldn't give 2/3rds of a dirty brown shit whether you give a stuff or not.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Could be. Could also be that they sit around broken more. To be fair, you almost never see one driving around. I see more R chassis GTRs than the Renault ones.
    • Yeah. Nah. This is why I said My bold for my double emphasis. We're not talking about cars tuned to the edge of det here. We're talking about normal cars. Flame propagation speed and the amount of energy required to ignite the fuel are not significant factors when running at 1500-4000 rpm, and medium to light loads, like nearly every car on the road (except twin cab utes which are driven at 6k and 100% load all the time). There is no shortage of ignition energy available in any petrol engine. If there was, we'd all be in deep shit. The calorific value, on a volume basis, is significantly different, between 98 and 91, and that turns up immediately in consumption numbers. You can see the signal easily if you control for the other variables well enough, and/or collect enough stats. As to not seeing any benefit - we had a couple of EF and EL Falcons in the company fleet back in the late 90s and early 2000s. The EEC IV ECU in those things was particularly good at adding in timing as soon as knock headroom improved, which typically came from putting in some 95 or 98. The responsiveness and power improved noticeably, and the fuel consumption dropped considerably, just from going to 95. Less delta from there to 98 - almost not noticeable, compared to the big differences seen between 91 and 95. Way back in the day, when supermarkets first started selling fuel from their own stations, I did thousands of km in FNQ in a small Toyota. I can't remember if it was a Starlet or an early Yaris. Anyway - the supermarket servos were bringing in cheap fuel from Indonesia, and the other servos were still using locally refined gear. The fuel consumption was typically at least 5%, often as much as 8% worse on the Indo shit, presumably because they had a lot more oxygenated component in the brew, and were probably barely meeting the octane spec. Around the same time or maybe a bit later (like 25 years ago), I could tell the difference between Shell 98 and BP 98, and typically preferred to only use Shell then because the Skyline ran so much better on it. Years later I found the realtionship between them had swapped, as a consequence of yet more refinery closures. So I've only used BP 98 since. Although, I must say that I could not fault the odd tank of United 98 that I've run. It's probably the same stuff. It is also very important to remember that these findings are often dependent on region. With most of the refineries in Oz now dead, there's less variability in local stuff, and he majority of our fuels are not even refined here any more anyway. It probably depends more on which SE Asian refinery is currently cheapest to operate.
    • You don't have an R34 service manual for the body do you? Have found plenty for the engine and drivetrain but nothing else
    • If they can dyno them, get them dyno'd, make sure they're not leaking, and if they look okay on the dyno and are performing relatively well, put them in the car.   If they're leaking oil etc, and you feel so inclined, open them up yourself and see what you can do to fix it. The main thing you're trying to do is replace the parts that perish, like seals. You're not attempting to change the valving. You might even be able to find somewhere that has the Tein parts/rebuild kit if you dig hard.
    • Can you also make sure the invoices on the box (And none exist in the boxes) are below our import duty limits... I jest, there's nothing I need to actually purchase and order in. (Unless you can find me a rear diff carrier, brand new, for stupidly cheap, that is for a Toyota Landcruiser, HZJ105R GXL, 2000 year model...)  
×
×
  • Create New...