Jump to content
SAU Community

Recommended Posts

Yes i realise this - but as i said, just once you get pinned and it's all over really.

The EPA aren't idiots, they know probably 95% of people are putting a massively restrictive muffler/baffle onto their exhausts etc etc.

So it's only a matter of time before they clamp down on that as well.

I think so far in this car i have been epad 3 times. 1 full test and 2 noise tests. The guy i know that does the EPA noise test puts that i have a mid muffler on the diagram so the epa dont bother me about it later.

But on a different question here, what is the distinct line between a defect and an epa?

E.g. On a defect notice they will write that a atmo bov is a defect on the vehicle... but it technically is an EPA issue. I was under the impression that a defect is given for a car that is un road worthy. Why do they pick up things that have to do with EPA and put it on a defect??

Just an update, got my defect cleared the other week, took the RWC to Vicroads and they just cleared it.

I thought that they inspect the vehicle for major defects, but they did not. Too easy.

  • 2 weeks later...
  • 1 month later...

quick query. i own a 94 32gtr and i recently recieved my first full EPA notice, however;

when the police officers pulled me over and found out that it was a "GTR skyline" according to the coppa, he told me my pods were illegal, even though they are dry pods. my intercooler is illegal, even though it is an R33 GTR intercooler (steel end tanks rather than plastic on the 32s) and my bovs were illegal. He also pointed out that my exhaust was rather loud (which it is, fair enough).

So now I have to go get the test even though the legislation clearly states 2 of my intake modifications are legal? So if I put a stock exhaust or have my current one modified to suit and put stock recirculation valves in I should pass?

How is it though the cops can report you to the EPA for modifications that they say are legal? I rang the EPA and they listed the modifications recorded which were;

aftermarket pods

aftermarket intercooler

aftermarket bovs

and aftermarket exhaust.

Is there anyway in the future if I am pulled over of informing the police, shy of pulling out the GTR service manual, that my modifications are indeed legal.

any help greatly appreciated guys

regards,

Gabbo

Police can report you for EPA regardless of whether or not you are actually in violation. They don't care, there is no punishment/reprimand system in place etc etc.

So they can report you for anything based on suspicion, not fact.

That's how the law is, so they get away with it.

I will take the next cop that reports me to court, im sick of it :D

Police can report you for EPA regardless of whether or not you are actually in violation. They don't care, there is no punishment/reprimand system in place etc etc.

So they can report you for anything based on suspicion, not fact.

That's how the law is, so they get away with it.

I will take the next cop that reports me to court, im sick of it :rant:

Has anyone ever thought about legal action against the police for continual harrasment? or a group action against the police for continual harrasment? its a pretty well known fact the import scene is targeted over say the v8 scene. i wonder if the xr6turbo forums have a threat purely devoted to EPA dramas.

anyway, got any advice for us dude, your help would be really appreciated

Im running out of ideas to get air into my standard airbox as i cant fit the snorkle in due to fmic piping. Getting a vented cf bonnet which will have a air intake feed for a pod. Was wondering if its classified as a "intake mod" if i cut a hole in the top of the standard airbox and fill it up with thin mesh so that the air can get in from the top?

Cheers

Im running out of ideas to get air into my standard airbox as i cant fit the snorkle in due to fmic piping. Getting a vented cf bonnet which will have a air intake feed for a pod. Was wondering if its classified as a "intake mod" if i cut a hole in the top of the standard airbox and fill it up with thin mesh so that the air can get in from the top?

Cheers

Change the FMIC piping. Keep the snorkel.

Cheers.

  • 3 weeks later...
Im running out of ideas to get air into my standard airbox as i cant fit the snorkle in due to fmic piping. Getting a vented cf bonnet which will have a air intake feed for a pod. Was wondering if its classified as a "intake mod" if i cut a hole in the top of the standard airbox and fill it up with thin mesh so that the air can get in from the top?

Cheers

according to a previous post, modifying the stock air box is considered an intake mod.

Has anyone ever thought about legal action against the police for continual harassment? or a group action against the police for continual harassment? its a pretty well known fact the import scene is targeted over say the v8 scene. i wonder if the xr6turbo forums have a threat purely devoted to EPA dramas.

anyway, got any advice for us dude, your help would be really appreciated

not sure what your car looks like but if it draws attention from the average person, than that's a start. change the car to looks more stock like, have an exhaust closer to the 90db limit, have a pumped back BOV ect.

other than those ideas, you are outta luck unless you move suburbs or change the areas you drive through.

just to let you boys know, its possible to pass a full EPA with a full turbo back 3" system. I JUST DID! @86db.

i have a 3" Xforce cat, middle muffler and rear Fujitsubo Jasma muffler - all 3" piping. - i also passed my 180sx with full 3" system from turbo until rear muffler- rear muffler was 3" to 2" especially made up to be like stock. @87db.

....this might help people save money n time :)

just to let you boys know, its possible to pass a full EPA with a full turbo back 3" system. I JUST DID! @86db.

i have a 3" Xforce cat, middle muffler and rear Fujitsubo Jasma muffler - all 3" piping. - i also passed my 180sx with full 3" system from turbo until rear muffler- rear muffler was 3" to 2" especially made up to be like stock. @87db.

....this might help people save money n time :D

86db exhaust on the stagea is legal too... Racepace do 3.5" legal systems, that flow rather well from what has been said by members on this board...

according to a previous post, modifying the stock air box is considered an intake mod.

Keep snorkel same, when modifying FMIC piping I wonder if changing the pipe off the TB to tight bend would be argued to be a separate mod, or part of the FMIC+piping mod :)

Got full epa from pettet, yay! Have a 3" kaikimoto system wif a high flow catco cat. Now i know the exhaust is "Jasma"approved which means 92dba Yes? Which i can swap out for something i get made up. I was just wondering about the emissions. Do i have to worry about my FMIC? Will that play with the emissions? and BTW its a return style so wont get dicked for that

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm actually not sure - I think it was "Stealth Performance" (It really is near impossible to find a FEMALE 1/8BSPT to 1/8NPT male at ALL) but having the thing leveraged on a 90 degree angle on a small aluminium fitting is not too smart. Also in not too smart, I've drilled out the center of the broken fitting so there's maybe 0.00001mm of thread to bite into, so yeah. I may have to get it drilled/tapped/plugged entirely. Given I could conceivably tap a thread/adapter/pressure line in any point in the oil system I suppose it's feasible to run a line to the Nissan Sensor to keep the dash working. Do these exist in AN fittings and the like? Like an AN fitting that has a NPT (or other?) thread as well for putting a sensor in?
    • I would agree.  There will be an amount of boost you could run safely with an otherwise factory system, but it would be low enough to not be worth the cost.  And if you are reliving your 20s, you know a 'little bit' was never enough. Personally, if I didn't want to spend the money, then stick with NA bolt-ons, and maybe a tune.
    • Fuark, at least the motor survived. What brand was the fitting that snapped?
    • Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
    • Measure voltage at the starter solenoid terminal when the key is at start and it has clicked. If it is really low, then the suspicion falls on the ignition switch (contacts or wiring thereof) as causing a voltage drop instead of sending enough volts to throw the solenoid all the way to engage the starter itself. If it is a decent voltage, then the suspicion is on the solenoid. Might have s horted coil, or might hva dirty contacts. Rip the starter off, dismantle, clean up contacts and inspect winding. It might not be possible to see if there is a short in the winding though. I have a spare starter here that I could measure the resistance of the coil, as a guide to about what it should be, if you need a comparison. <parts hoarder>No you cannot have it.</parts hoarder>
×
×
  • Create New...