Jump to content
SAU Community

Recommended Posts

MUZ,

already counted you and matt :ermm:

didn't get to fiddle with the lang setting told customer though and gave him the PDF as well. we'll see.

the way it reads though its one or the other.

Hi Muz:

What's happend??

something wrong.

Would mind share with us?

Highly edited version follows.

Approached broker about importing late model M35. Was compliance available? Yes definitely. Purchased car from Japanese auctions 21/03/2007. Car arrived 21/05/2007, went to comply car, compliance not available for M35 after MY 11/2003. Several long drawn out attempts have been made to try and get car passed for emissions but no such luck to date. Car is to undergo another attempt next week with no guarantee of passing. Compliance person is confident? that it will pass emissions testing eventually, he just doesn't know when. Meanwhile our $35,000 investment (which we have never seen) travels the country on the back of one car carrier or another. Saga continues. If you want to know more, feel free to PM me.

Cheers

Muz

Edited by Muz
Highly edited version follows.

Approached broker about importing late model M35. Was compliance available? Yes definitely. Purchased car from Japanese auctions 21/03/2007. Car arrived 21/05/2007, went to comply car, compliance not available for M35 after MY 11/2003. Several long drawn out attempts have been made to try and get car passed for emissions but no such luck to date. Car is to undergo another attempt next week with no guarantee of passing. Compliance person is confident? that it will pass emissions testing eventually, he just doesn't know when. Meanwhile our $35,000 investment (which we have never seen) travels the country on the back of one car carrier or another. Saga continues. If you want to know more, feel free to PM me.

Cheers

Muz

All the 'Brokers" know that due to ADR 79 certain models of vehicles do not have their emissions test approved for the later models, they should tell you who is complying the car and he needs to give you their details and you have a chat to them about these things before you buy the car, but if they let that happen you will properly not buy the car if emissions isn't sorted and the Broker won't get your $1,000.

This has been going on for over 12 months so this situation isn't a surprise as they might call it and if they tell you all the pit falls what are the chances of you not buying a $50.000 car sight un-seen........

hi there peepz.. just like to introduce maself as one of the V35 owners!! lovin it.. although could please someone tell me if any of your cd player is working? coz mine isnt?.. :) also just how can i tell d difference between xenon and non-xenon?

Hi mate:

It seems everyone's cd player is working, your one not working????

I thought you bought from a dealer????

What's the error? Mine wouldn't work initially either, kept erroring and I thought it was dead. Kept trying and after about a week it simply started working and never looked back. Weird. Copies and originals all work fine too.

What's the error? Mine wouldn't work initially either, kept erroring and I thought it was dead. Kept trying and after about a week it simply started working and never looked back. Weird. Copies and originals all work fine too.

its just keeps coming up as "cd error".. told the dealer about it and was quite surprise that it isnt working.. they"re quite busy so they won't be able to fix it until 2 weeks.. its gets really lonely inside that car without music lol!

how about an EXACT desription of the problem from the moment you put the disc in place. IE what the unit does, noises it makes and the final result.

only issue will be parts if its a mech related problem . there are no parts available for it. the laser could be another issue as there is a local version here that i 'believe' used the same one.

how about an EXACT desription of the problem from the moment you put the disc in place. IE what the unit does, noises it makes and the final result.

only issue will be parts if its a mech related problem . there are no parts available for it. the laser could be another issue as there is a local version here that i 'believe' used the same one.

when i press the cd button, it asks to load the cd, then when u insert the cd, it takes a while to read.. around 20secs then it comes up as "cd error f3" it doesnt make any funny noises.. there is no problem with inserting, ejecting nor changing cd between stacker, it just cannot read d cd fro some reason..

A good contact for electronics for the V35 in Sydney is Con at Revolution Ph 02 9797 6499. He sorted my central locking/alarm problem/fuel door lock problem and has had a lot of experience with the 350GT and other imports - a great find for me. He has a website: www.revolutionservices.com.au

A good contact for electronics for the V35 in Sydney is Con at Revolution Ph 02 9797 6499. He sorted my central locking/alarm problem/fuel door lock problem and has had a lot of experience with the 350GT and other imports - a great find for me. He has a website: www.revolutionservices.com.au

looked at that. he's the one that does japlink..

looked at that. he's the one that does japlink..

looking forward to your satnav/dvd/FM intergated solution chris...

so can u explain the AUX mode to me.im sure it wont be possible to hook up sony stakers to it,but if the unit is clarion can their stakers be hooked in?

did the murano have a add on staker option?

A good contact for electronics for the V35 in Sydney is Con at Revolution Ph 02 9797 6499. He sorted my central locking/alarm problem/fuel door lock problem and has had a lot of experience with the 350GT and other imports - a great find for me. He has a website: www.revolutionservices.com.au

There is another contact I have heard of from NSW Marrickville who does installation of the sat/nav/dvd entertainment units. Quoted 1700 for sat/nav and 800 for dvd/mp3. Apparently has done many v35's.

Nam's Electronic Service ph 95504144.

Has anyone had their car done here before?

looking forward to your satnav/dvd/FM intergated solution chris...

so can u explain the AUX mode to me.im sure it wont be possible to hook up sony stakers to it,but if the unit is clarion can their stakers be hooked in?

did the murano have a add on staker option?

as am I once the people get the patch lead right! I tried to get the correct plugs and leads done O/S - nup! they fudged it! nav I have sorted.

as for the murano- unsure. I have one due on saturday so I'll have a look.

what are you thinking?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...