Jump to content
SAU Community

Recommended Posts

MUZ,

already counted you and matt :ermm:

didn't get to fiddle with the lang setting told customer though and gave him the PDF as well. we'll see.

the way it reads though its one or the other.

Hi Muz:

What's happend??

something wrong.

Would mind share with us?

Highly edited version follows.

Approached broker about importing late model M35. Was compliance available? Yes definitely. Purchased car from Japanese auctions 21/03/2007. Car arrived 21/05/2007, went to comply car, compliance not available for M35 after MY 11/2003. Several long drawn out attempts have been made to try and get car passed for emissions but no such luck to date. Car is to undergo another attempt next week with no guarantee of passing. Compliance person is confident? that it will pass emissions testing eventually, he just doesn't know when. Meanwhile our $35,000 investment (which we have never seen) travels the country on the back of one car carrier or another. Saga continues. If you want to know more, feel free to PM me.

Cheers

Muz

Edited by Muz
Highly edited version follows.

Approached broker about importing late model M35. Was compliance available? Yes definitely. Purchased car from Japanese auctions 21/03/2007. Car arrived 21/05/2007, went to comply car, compliance not available for M35 after MY 11/2003. Several long drawn out attempts have been made to try and get car passed for emissions but no such luck to date. Car is to undergo another attempt next week with no guarantee of passing. Compliance person is confident? that it will pass emissions testing eventually, he just doesn't know when. Meanwhile our $35,000 investment (which we have never seen) travels the country on the back of one car carrier or another. Saga continues. If you want to know more, feel free to PM me.

Cheers

Muz

All the 'Brokers" know that due to ADR 79 certain models of vehicles do not have their emissions test approved for the later models, they should tell you who is complying the car and he needs to give you their details and you have a chat to them about these things before you buy the car, but if they let that happen you will properly not buy the car if emissions isn't sorted and the Broker won't get your $1,000.

This has been going on for over 12 months so this situation isn't a surprise as they might call it and if they tell you all the pit falls what are the chances of you not buying a $50.000 car sight un-seen........

hi there peepz.. just like to introduce maself as one of the V35 owners!! lovin it.. although could please someone tell me if any of your cd player is working? coz mine isnt?.. :) also just how can i tell d difference between xenon and non-xenon?

Hi mate:

It seems everyone's cd player is working, your one not working????

I thought you bought from a dealer????

What's the error? Mine wouldn't work initially either, kept erroring and I thought it was dead. Kept trying and after about a week it simply started working and never looked back. Weird. Copies and originals all work fine too.

What's the error? Mine wouldn't work initially either, kept erroring and I thought it was dead. Kept trying and after about a week it simply started working and never looked back. Weird. Copies and originals all work fine too.

its just keeps coming up as "cd error".. told the dealer about it and was quite surprise that it isnt working.. they"re quite busy so they won't be able to fix it until 2 weeks.. its gets really lonely inside that car without music lol!

how about an EXACT desription of the problem from the moment you put the disc in place. IE what the unit does, noises it makes and the final result.

only issue will be parts if its a mech related problem . there are no parts available for it. the laser could be another issue as there is a local version here that i 'believe' used the same one.

how about an EXACT desription of the problem from the moment you put the disc in place. IE what the unit does, noises it makes and the final result.

only issue will be parts if its a mech related problem . there are no parts available for it. the laser could be another issue as there is a local version here that i 'believe' used the same one.

when i press the cd button, it asks to load the cd, then when u insert the cd, it takes a while to read.. around 20secs then it comes up as "cd error f3" it doesnt make any funny noises.. there is no problem with inserting, ejecting nor changing cd between stacker, it just cannot read d cd fro some reason..

A good contact for electronics for the V35 in Sydney is Con at Revolution Ph 02 9797 6499. He sorted my central locking/alarm problem/fuel door lock problem and has had a lot of experience with the 350GT and other imports - a great find for me. He has a website: www.revolutionservices.com.au

A good contact for electronics for the V35 in Sydney is Con at Revolution Ph 02 9797 6499. He sorted my central locking/alarm problem/fuel door lock problem and has had a lot of experience with the 350GT and other imports - a great find for me. He has a website: www.revolutionservices.com.au

looked at that. he's the one that does japlink..

looked at that. he's the one that does japlink..

looking forward to your satnav/dvd/FM intergated solution chris...

so can u explain the AUX mode to me.im sure it wont be possible to hook up sony stakers to it,but if the unit is clarion can their stakers be hooked in?

did the murano have a add on staker option?

A good contact for electronics for the V35 in Sydney is Con at Revolution Ph 02 9797 6499. He sorted my central locking/alarm problem/fuel door lock problem and has had a lot of experience with the 350GT and other imports - a great find for me. He has a website: www.revolutionservices.com.au

There is another contact I have heard of from NSW Marrickville who does installation of the sat/nav/dvd entertainment units. Quoted 1700 for sat/nav and 800 for dvd/mp3. Apparently has done many v35's.

Nam's Electronic Service ph 95504144.

Has anyone had their car done here before?

looking forward to your satnav/dvd/FM intergated solution chris...

so can u explain the AUX mode to me.im sure it wont be possible to hook up sony stakers to it,but if the unit is clarion can their stakers be hooked in?

did the murano have a add on staker option?

as am I once the people get the patch lead right! I tried to get the correct plugs and leads done O/S - nup! they fudged it! nav I have sorted.

as for the murano- unsure. I have one due on saturday so I'll have a look.

what are you thinking?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...