Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...

Finally got to take the Silvia out and have a run with the new MCA suspension on the weekend. Worth every cent is all i can say the car was awesome to drive, we unfortunately had to retire after stage 2 with a burst water line under the plenum that we couldnt fix in time but was 2nd outright behind an evo 9 untill then.

post-54017-1288573292_thumb.jpg

Finally got to take the Silvia out and have a run with the new MCA suspension on the weekend. Worth every cent is all i can say the car was awesome to drive, we unfortunately had to retire after stage 2 with a burst water line under the plenum that we couldnt fix in time but was 2nd outright behind an evo 9 untill then.

Go the S13!! So good to see a cool RWD car ripping it up against AWD evo/rexies!

Go the S13!! So good to see a cool RWD car ripping it up against AWD evo/rexies!
spewing about the retire Jase :laugh: next event you'll smash it!

Thanks guys, thats most likely it for me this year but will be back next year though ready to chase down the AWD's

In car from stage 1 can be found here

Well I finally got my R32 GTST out on the track for Time Attack at Lakeside on the weekend.

Never having driven the car I started off slow and was building up speed.

Blew a turbo and diff for the day and retired early.

Still had a great day and at least I didn't hit the wall. Thats racing.

Posted a 1:12.3400 for the day and still had an excellent day anyway.

post-40739-1288683198_thumb.jpg

nice man.

it always a good feeling taking a car out for the first time, shame bout the turbo though..

with the cage did you bump it with the hemet much? was it annoying? asking cause i think i will with mine.

Cage was a pain in the arse. I have the seat as low as I can. I am six foot and can't really see the front left side of the bonnet. The whole time my head was either resting or bouncing off the cage to the side above the window. Probably wouldn't without the padding. I will have to find a solution.

Madly sourcing parts to hopefully get another round in before the end of the year. Not sure I will but otherwise back in force next year.

i know its not tarmac but here is a pic of my dirt circuit chassis and engine build so far.

chassis runs quickchange rear end and full coilover plus 5th are suspension set up i have a ve commadore body to go over the chassis and the motor is a 308 with lots of goodies . i know its not a skyline or even a turbo lol so dont flame me :-)mmm says i cant upload this type of file ? any ideas its a bitmap bmp file ?

Edited by mid life crisis
i know its not tarmac but here is a pic of my dirt circuit chassis and engine build so far.

chassis runs quickchange rear end and full coilover plus 5th are suspension set up i have a ve commadore body to go over the chassis and the motor is a 308 with lots of goodies . i know its not a skyline or even a turbo lol so dont flame me :-)mmm says i cant upload this type of file ? any ideas its a bitmap bmp file ?

Sounds interesting. Try opening the bmp in Microsoft Paint, then go to the File menu > Save As - save window will show up, change the "Save as type" drop down menu to "Jpeg" - save it somewhere like My Documents and try uploading your newly created .jpg version.

try again lol

i know its not tarmac but here is a pic of my dirt circuit chassis and engine build so far.

chassis runs quickchange rear end and full coilover plus 5th are suspension set up i have a ve commadore body to go over the chassis and the motor is a 308 with lots of goodies . i know its not a skyline or even a turbo lol so dont flame me :-)

ah got it cheers all

Edited by mid life crisis

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The powder coating came in at $250 EACH. The TRX rims got a coat of clearcoat on the outside only.    
    • Bit wet, but YUMMY
    • Keeping in mind that I am currently getting flat 10 L/100km on my RB25DET, which means >>500km/tank. I would test this car for vacuum leaks, check codes and AFM signal with NissDataScan as D says, check plugs, do a compression check while they are out.
    • It is hard to be specific half way across the world...but it *seems* like it might have a minor issue. Is the idle stable and does it rev smoothly? I would not expect any pops out of what I am assuming is a standard ECU, standard tune, standard exhaust. You can use Nissan Data Scan to find out exactly what is happening when it runs, the cable/software is reasonably affordable if you are not planning on changing the ECU (which hopefully you are not with an NA skyline) BTW your mileage may not be that far off, these are heavy old tech cars, and being NA might mean you use a heavy foot to keep up with traffic....
    • Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
×
×
  • Create New...