Jump to content
SAU Community

Recommended Posts

to be honest, i like changing my plugs every 10k kms. lol

gives you the opportunity to check their condition, spot any warning signs, and give the whole area a once over.

i'd feel weird not looking at them for 100k kms, if they infact would even last that long.

+1

i crack mine open every 5,000kms to check up on em, replace at 10,000kms. better be safe then sorry :(

  • 1 month later...
  • 3 weeks later...

splitfires have been tested and proven,

yellow jackets are probably the best ones for money out there. so far ive had the car up to 14psi on 1.1 plug gap with no problems.

They came packaged properly, they fit perfectly and perform great. And you get warranty. For that money, not much more you can ask for.

Does anyone know where the Splitfires are actually manufactured ? Is it Japan ?

Set of splitfires on ebay is $600 yet the market's been flooded with all these yumcha $300 coilpacks resold under various brands .. I believe they ALL probably come from the same chinese manufacturer. Justjap sell them, performance-wise sells them and there are a few different companies on Ebay that sell them and each one gives them a different brand name but to me they look the same. Some are different colours but I think that's just part of a ploy to try and fool consumers into thinking they're from different manufacturers.

Anyway, what's everyones experience been with these Yumcha coil packs that sell for $300 on Ebay ? I've read some good but also a few negative posts where they either came DOA or one or more coilpacks died after only a short time.

Ill clarify from personal experience on my own cars.

I had RB25DET R33. Usual misfire, coilpacks blah blah blah. I too tossed up between splitfires ($800 at the time) and the JJR ones at just under half price.

Money was tight and I went the JJR's, worked excellent for 6 months brilliantly, replaced plugs 2 weeks after install and the car went even harder! Was so very impressed!

Unfortunately one coilpack malfunctioned at about the 8 month mark, jumped on the phone to JJR, they sent me a new one and even re-imbursed postage.

Over a year on and they are still going very strong and very happy with the product.

People claim to have dyno'd splitfires against china brand and have found 5-10hp difference, but personally I think its a crock of shit with people trying to make there china product better than the real deal or another china brand

All in all, I was very happy with the product apart from the little mishap and would definately use them again as they solved my problem and gave me better performance and fuel economy.

And as always, the shit under the bonnet of your car is nearing 20 years old, its brittle and will break, be gentle! Especially with your coilpack harness. I learnt the hardway.

Goodluck, for more info do a search I did a writeup in someone elses topic early last year. This topic has been covered!

I just thought I should also add.

I have installed 2 more sets off JJR coilpacks into mates RB25DET powered vehicles and one set of another brand of china pack in a RB20DET

All three sets have worked faultlessly to date and they are well over a year old also

welll without searching too hard you should have been able to find the 200+ post thread on the same topic......

http://www.skylinesaustralia.com/forums/JJ...li-t187108.html

I've locked this one so just post up in the other.

hm it seems JJR and YellowJackets don't sell any coil packs for R34 GTT's where as SuperSpark do ... I used to think they are all the same chinese coilpacks rebranded but doubt it anymore. If Supersparks were made in the same place as the others, the other sellers would have R34 GTT coilpacks for sale by now.

But anyway ..only a $50 difference between Superspark and Splitfire so might as well go Splitfire if you have an R34 GTT/Stagea (NEO motor)

from what Ive looked into they arent made in the same factory. Ive also heard that there will be some R34 RB25 NEO Yellow Jackets on the market very soon. Id assume the pricing would be the same as the other yellow jacket models too. This is great news as they are about $100 cheaper than supersparks and about $150-200 cheaper than splitfires.

well i have used OEM on a number of my cars. splitfires on 2 (about to be 3 next week) and other branded chinese ones (like superspark, JJR etc).

my experience. most OEM ones have been fine, but I did eventually develop a missfire in one car that was fixed by a set of splitfires.

I've never had a splitfire coil fail and used them in one of my GTRs for a number of years. and one set of them I bought was second hand so used for who knows how long before I got them. they are good quality and work just as promised. I can't honestly say they give any more power over a properly functioning oem nissan coil. the problem is though most of our oem coils are pretty old and not at their best so it's not un-usual to get an improvement when switching to splitfires.

as for the other 'brands' with the various colour chinese made coil packs. my experience has not been so great. they worked ok for about 10 months, then 1 failed. luckily they do have local service cause you might well need it! in their defence the coil was tested and promptly replaced. things were fine again for a while. now they again have a light miss that goes away when I swap them out for a set of OEM coils. so we'll see what happens from here.

i won't name the 'other' coils as it's not really fair as they have at least stood behind their product. but it's still annoying having them fail and take your car off the road. for the money they are I guess reasonable value. but I do think the splitfires are a better product. are they $XXX better? I can't say for sure.

  • 4 weeks later...
as for the other 'brands' with the various colour chinese made coil packs. my experience has not been so great. they worked ok for about 10 months, then 1 failed. luckily they do have local service cause you might well need it! in their defence the coil was tested and promptly replaced. things were fine again for a while. now they again have a light miss that goes away when I swap them out for a set of OEM coils. so we'll see what happens from here.

Does anyone else have anything to add with long term use of the cheap chinese coil packs? I'm leaning toward getting a set of the yellow jackets but wondering whether it's worth spending a little extra on Splitfires. It would suck to have a $400 set fail a month out of warranty!!

Does anyone else have anything to add with long term use of the cheap chinese coil packs? I'm leaning toward getting a set of the yellow jackets but wondering whether it's worth spending a little extra on Splitfires. It would suck to have a $400 set fail a month out of warranty!!

Ive been using Yellow Jackets for around 11 months now and they are still going as strong as the day I put them in.

performance-wise has them on there website for around $370 delivered.

is it normal for a skyline to hesitate a bit when switching gears or is that a sign of a coil pack(s) on its way out ?

hey dennis, i have this problem too

i assumed it was my crap tune so never did much about it.

it didn't do it before the tune was done tho.

if you find the problem, please let me know.

Just purchased some yellow jackets for my RB20 off www.performance-wise.com now - I highly recommend their services! Paul is a great help and is very quick to respond to any e-mails.

*****

Can't wait to test them out and go back to some 1.1mm plugs.

  • 2 weeks later...
is it normal for a skyline to hesitate a bit when switching gears or is that a sign of a coil pack(s) on its way out ?

Inerested to find this out too, my car does it every now and then, kinda like if i catch it by surprise and shift too soon or somethin.

but anyways I'll be getting a set of yellow jackets next week ive decided, cant wait to see wat they can do for me

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...