Jump to content
SAU Community

Recommended Posts

Yeah I was trying it with the clean grip - I've never done cleans or any other Olympic lifts before either!

I'll try the arms crossed one, I thought it was bad for you though. Failing that, I'll invest in some straps, since the hand placement isn't an important part of the movement

Use a Smith machine to figure out which grip works for you. I'm going to start front squats soon and that's what I plan on doing first.

No way I'm going to try arms crossed with a barbell first time round. Might kill someone

Safety bar squats are somewhat similar to front squats in that the weight is out the front of you a bit. I am doing them at the moment because I have niggling ac joint issue and front squating with the bar on it in the rack position hurts.

Well an empty still weighs 20kgs and isn't restrained, so if you don't have it sitting right and it falls you could injure yourself or others I guess (and look like the tard that dropped a bar..)

Smith machine with 10 a side to start, once I get familiar with it move up to barbell.

Front squat focuses on the quad right?

Also, what program do you suggest to really stimulate calf growth? I'm finding that the arches of my feet start going before my calves so not getting the most out of it. I'm considering taking skipping back up to develop some conditioning on rest days and then high volume sets on leg day.

Comments?

another technique to stretch your arms out to improve front squats is:

assume the front squat position with arms under bar and elbows forward

have friend stand with their shoulders under your arms and slowly stand up

i get my mates to do it, main drawback is theyre both 6ft6 and im 5ft 10

another technique to stretch your arms out to improve front squats is:

assume the front squat position with arms under bar and elbows forward

have friend stand with their shoulders under your arms and slowly stand up

i get my mates to do it, main drawback is theyre both 6ft6 and im 5ft 10

sounds very broke back mountain.

which part is difficult boz?

Elbows up?

thoracic extension of the upper back?

shoulders not able to come forward enough?

video it

all fingers under is fine if you can.

but it requires more wrist flexibility.

the first 2 fingers makes it easier,

They are not there to hold the bar really.. just to anchor your hands somewhere so you can push the elbows UP.

and yes..

right up in to your throat.

I get my fingers where I want them, then the feet under, then swing one arm under, then the other as I put my head right back so the bar is right up against the part of my throat and clavicle meet.. then bring my head down.

as you stand up and have elbows up, the bar ends up sitting on your front delts rather than the clavicle.

then it's a big breath in, chest/elbows up, back arched, and squat down between the heels.

This shows where I mean by on the throat/clavicle.. ignore that his hands are not on the bar.

hands-free-front-squat.jpg

and what I mean by 2 fingers..

kasi_front_squat_low_res.jpg

Edited by TTT

Its defs a fine line between cutting off air supply/blood flow and finding the right spot for the bar. If you find it hard to keep elbows up, wait til you start squatting with it.

I get just as mucg of an upper back workout as legs doing them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...