Jump to content
SAU Community

Recommended Posts

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

i think so? i'm not sure!

i figure its just Eligible at the moment

Basis: Regulation 24(4)(b)(ii)(A) and 24(4)©(ii). Model of vehicle has not been supplied in MA Category to the Australian market in Full Volume and meets 2 out of 4 criteria.

there would have to be more compliance work

??

I'm guessing it will be as soon as a compliance workshop takes it on.

First shop to be able to do it should be rolling in the $$$$ soon.

i'm not so sure about that.. they are fetching a rather large price in japan, looks like people are making profit on the sale price. will have to wait for that to die down a bit.

yes, finally shows up.

What this means is that now RAWS can apply to compliance the car to australian standards... of course this means that evidence will have to be provided to gain the ability to comply them... so it might be a while before we see them parallel imported.

However this doesn't stop workshops bringing in "test cars" to make modifications and gather data from.

Depending on what format Nissan Australia uses to bring in the R35's, if they were to import them as low volume, then parallel importation for the whole period is possible. However if Nissan Australia gets full volume importation then we won't be able to import cars made during that period.

Anyways, the good news is, from now till Nissan Australia officially sells its first R35, any R35 made in japan is eligible for import (providing it complies with the "new car" regulations, as that's what the approval is for.)

I'd say any price under $150,000 should be competitive enough.

i'm not so sure about that.. they are fetching a rather large price in japan, looks like people are making profit on the sale price. will have to wait for that to die down a bit.

with people already bringing in examples for race-use only, im sure there will be at least a few rich folk heading out to buy one, but hey i could be wrong.

Rolling in the $$$?? doubtful.

Compliance on the R35 will not be cheap, plus the market price in Japan, current demand, taxes, you name it.

That's true. Do you mean the price of compliance for the buyer, or the price of compliance to be able to comply it?

Of course the cost for the buyer will be high, but if you can afford an R35 in the first place, you can probably afford compliance on such a vehicle.

Only time will tell I guess.

well i never...... can't believe Nissan didn't shut the door on this....

from my experience engineers reports, evidence packages and clearing it through DOTARS can't take for eeeeeeeeeeeeeever

well since the cat is out of the bag I might as well give up the news. Yes the R35 has been added to the SEVS list. This was done by Herman at Envy Imports last month. In a little partnership between Herman and I we are importing an R35 with the intention of gaining compliance for this model. It being on the SEVS list does not mean much though, so don't get too excited. It just means it's an eligible vehicle. There is still a long (and expensive) process ahead of us but we will almost certainly be the first in australia to be able to supply and comply R35 GTRs for road registration. If everything goes to plan we will be able to import and comply 2007 and 2008 models, possibly even early 2009 models. I am also supplying another R35 for someone for race use.

If anyone is interested in importing an R35 feel free to send me a PM as I don't want to go into too much detail here. Our first car should be arriving next month. :blink:

Yeah it is good and all but the prices being discussed are still around $165K (for the Premium) by the time everything is done, and given that is around the same price that Nissan Australia is talking about it's a massive risk to lose the warrinty etc just for the sake of getting one of these cars a couple of month earlier.

Unless the savings were so huge that the costs could possibly out-weigh anything you'd save on a possible warrinty claim I just can't justify not waiting for the local delivered models.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did and sync timing with light 
    • Have you done the Ignition Sync Wizard in the AEM software?
    • Find out what RPM it was idling at with the IACV unplugged. It's very weird that the rpm didn't change at all, and then it stalled. When it stalls is it nearly like a switch off, like you've turned the engine off? Or is it more stutters and sputters and coughs to death over a few seconds? Or does the RPM just slowly keep going down and down? Have you done a test of trying to start it with the AFM unplugged? Does it still die?     If you Follow Josh's advice on using Nistune to check the voltages (which is a perfect method!) if you see anything out of wack voltage wise, THEN get the multimeter out and read the voltage directly at the sensor. If the two vary, then you're now looking for a wiring issue vs a sensor issue. So be aware, what the ECU sees, may not be what the sensor is actually saying too...
    • You very likely need to get it on a dyno and tune it. My assumption is, you've got an RB25DET tune in it, which has a different manifold, different injectors, and different cams as a minimum. What O2 sensor are you running?   When you say it runs extremely rich from idle all the way to redline, is this just free revving it you see that?
    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
×
×
  • Create New...