Jump to content
SAU Community

Recommended Posts

  • Replies 80
  • Created
  • Last Reply

Top Posters In This Topic

i think so? i'm not sure!

i figure its just Eligible at the moment

Basis: Regulation 24(4)(b)(ii)(A) and 24(4)©(ii). Model of vehicle has not been supplied in MA Category to the Australian market in Full Volume and meets 2 out of 4 criteria.

there would have to be more compliance work

??

I'm guessing it will be as soon as a compliance workshop takes it on.

First shop to be able to do it should be rolling in the $$$$ soon.

i'm not so sure about that.. they are fetching a rather large price in japan, looks like people are making profit on the sale price. will have to wait for that to die down a bit.

yes, finally shows up.

What this means is that now RAWS can apply to compliance the car to australian standards... of course this means that evidence will have to be provided to gain the ability to comply them... so it might be a while before we see them parallel imported.

However this doesn't stop workshops bringing in "test cars" to make modifications and gather data from.

Depending on what format Nissan Australia uses to bring in the R35's, if they were to import them as low volume, then parallel importation for the whole period is possible. However if Nissan Australia gets full volume importation then we won't be able to import cars made during that period.

Anyways, the good news is, from now till Nissan Australia officially sells its first R35, any R35 made in japan is eligible for import (providing it complies with the "new car" regulations, as that's what the approval is for.)

I'd say any price under $150,000 should be competitive enough.

i'm not so sure about that.. they are fetching a rather large price in japan, looks like people are making profit on the sale price. will have to wait for that to die down a bit.

with people already bringing in examples for race-use only, im sure there will be at least a few rich folk heading out to buy one, but hey i could be wrong.

Rolling in the $$$?? doubtful.

Compliance on the R35 will not be cheap, plus the market price in Japan, current demand, taxes, you name it.

That's true. Do you mean the price of compliance for the buyer, or the price of compliance to be able to comply it?

Of course the cost for the buyer will be high, but if you can afford an R35 in the first place, you can probably afford compliance on such a vehicle.

Only time will tell I guess.

well i never...... can't believe Nissan didn't shut the door on this....

from my experience engineers reports, evidence packages and clearing it through DOTARS can't take for eeeeeeeeeeeeeever

well since the cat is out of the bag I might as well give up the news. Yes the R35 has been added to the SEVS list. This was done by Herman at Envy Imports last month. In a little partnership between Herman and I we are importing an R35 with the intention of gaining compliance for this model. It being on the SEVS list does not mean much though, so don't get too excited. It just means it's an eligible vehicle. There is still a long (and expensive) process ahead of us but we will almost certainly be the first in australia to be able to supply and comply R35 GTRs for road registration. If everything goes to plan we will be able to import and comply 2007 and 2008 models, possibly even early 2009 models. I am also supplying another R35 for someone for race use.

If anyone is interested in importing an R35 feel free to send me a PM as I don't want to go into too much detail here. Our first car should be arriving next month. :blink:

Yeah it is good and all but the prices being discussed are still around $165K (for the Premium) by the time everything is done, and given that is around the same price that Nissan Australia is talking about it's a massive risk to lose the warrinty etc just for the sake of getting one of these cars a couple of month earlier.

Unless the savings were so huge that the costs could possibly out-weigh anything you'd save on a possible warrinty claim I just can't justify not waiting for the local delivered models.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...