Jump to content
SAU Community

Recommended Posts

I took these photos of your "old car" at the 2004 SAU Show 'n Shine...

It looks remarkably similar :)

Although an immaculate example of an everyday R33 GTS-t, I only took one set of bracketed photos of it.

malcolm_2004.jpg

im with you merli.. clean example of a modded 33 gtst.. but i for one have always been under the asumption the skyline GTX was powered by a ca18 in both r32 r33 and r34 models... or was that the GT-Xi... i cant remember either way.

Edited by rb26s13

lol, this thread took a turn for the interesting. :D

even if it is genuine (it sure does have a lot of plates to support that), since it's now quite modded, it's now a bit of a bitsa spec which would reduce it's collectibility. I must say I did notice some of the build plates say 95/1 and some say 93/12. :)

Wow, impressive. I remember how much money you put into your old GTS-25T, and it looked identical to the '2500R'.

In fact I remember when you had the Trust turbo and the Greddy plenum fitted.

What are the odds of finding a 'Genuine' 2500R in Japan, let alone one that looked like your previous cars twin?

HI THERE :)

NOT REALLY THAT IMPRESSIVE AT ALL - ITS NO WONDER YOURE GETTING MUDDLED ABOUT THERE BEING "2 CARS" THAT LOOK SIMILAR BECAUSE THEY ARE BOTH ONE IN THE SAME CAR - NOW I SEE WHERE YOURE COMING FROM - I THOUGHT YOU THOUGHT MY OTHER SKYLINE WAS A KEY FACTOR TO CONSIDER - NOT AT ALL - IT WAS A SERIES 2 PILE OF SHITE !! - THE 2500R "PROTOTYPE" "DEMO CAR" I BOUGHT IS A "TWEAKED" AND "FACELIFTED" GTS-25T - THE ONLY REAL IMPORTANT THING ABOUT THE CAR I HAVE IS THAT IT IS "THE CAR" THAT WAS PULLED OFF THE PRODUCTION LINE AND GIVEN SOME SPECIAL ATTENTION - WHEN I ORIGINALLY GOT IT ALL I KNEW WAS THAT IT WAS THE SECOND OUT OF THREE CARS THAT WERE USED FOR DEVELOPMENT IN THIS WAY - IT CERTAINLY WASNT AS YOU SEE IT TODAY - THERE WERE BITS MISSING AND BITS ON IT THAT HAD TO GO - IT HAD TOO MANY MIX MATCHED THEMES THAT WERENT WORKING HARMONIOUSLY TOGETHER - WHAT WAS WORKING WELL WAS THE FACT THAT GT-R PARTS WOULD EASILY AND READILY BE UTILISED - A GT-R INTAKE PLENUM WAS STILL IN THE BOOT WITH ASSORTED ADAPTER SHIMS AND GASKETS ALONG WITH A HAND WRITTEN LIST IN JAPANESE ON NISMO LETTERHEAD OF OTHER GT-R PARTS EARMARKED FOR INSTALLATION - IT HAD THE RIGHT BLOCK FOR THE CHASSIS (I HAD THAT CHECKED WITH NISSAN IN JAPAN) AND ALL THE CORRESPONDING ID PLATES ALSO MATCHED THOSE NUMBERS WHICH HELPED - NOW THE ODDS OF FINDING A "GENUINE 2500R" IN JAPAN WELL THAT WOULD BE IMPOSSIBLE AS THEY NEVER WENT INTO PRODUCTION - AS POINTED OUT IN THE HPI ARTICLE THERE IS NO DEFINITIVE MOULD TO PLACE OVER ANY OF THIS OTHER THAN THE CARS WERE BEING USED AS DEVELOPMENT TOOLS WHICH IN ITSELF IS VERY OPEN ENDED - THE CARS WOULD HAVE ALL GONE THROUGH MANY MANY DIFFERENT CONFIGURATIONS DURING THEIR 2 YEAR TOUR OF DUTY - HOW DIFFERENT IS THE NEW GTR IN RELATION TO THE PROTOTYPE THAT WAS BEING SHOWN 5 YEARS AGO - WITH ALL THE INFORMATION I HAVE BEEN ABLE TO SOURCE OVER THE PAST 7 YEARS I KNOW THAT WHAT HAS "EMERGED" IN MY CAR IS A SOLID REPRESENTATION OF THE DIRECTION THAT WAS BEING FOLLOWED IN JAPAN HAD THE 2500R BEEN REALISED AS A STABLE MATE OF THE 400R AND BEEN "AWARDED" MASS PRODUCTION HOMOLOGATION - IT WASNT TO BE WHICH IN MY MIND IS OF NO CONSEQUENCE AS NOT EVERY IDEA EVER THOUGHT OF GETS SEEN THROUGH TO THE END - THE PLENUM AND TURBOCHARGER ARE JUST 2 ADDITIONS FROM A VERY LONG LIST OF DOZENS AND DOZENS THAT HAVE BEEN THOUGHTFULLY APPLIED OVER THE YEARS - ALTHOUGH SAYING THAT A LOT OF THE DECISION MAKING PROCESS DICTATES ITSELF ESPECIALLY WHEN FROM THE OUTSET THE INTEGRITY OF A "FACTORY SPEC. LOOK" WAS SERIOUSLY ADOPTED AND ADHERED TO - THE INTERESTING THING TO NOTE IS THAT NO ONE WILL EVER KNOW EXACTLY THE "GTX-1 2500R" BECAUSE IT NEVER ACTUALLY HAPPENED - OF 3 ATTEMPTS 1 REMAINS AS TESTIMONY TO WHAT "NEARLY DID" "ALMOST WAS" AND "COULD HAVE BEEN" - KEPT ME OUT OF THE PUB FOR ALMOST A DECADE TOO WHICH CANT HAVE BEEN A BAD THING !! - LATERS - ALL THE BEST - MALCOLM :D

i always wondered why nismo and or Trust would allow a GReddy part to be on one of their proto-types with a Nismo badge on it.

one question...is the car at the S n S and the car in HPI the same car?

Edited by DiRTgarage
i always wondered why nismo and or Trust would allow a GReddy part to be on one of their proto-types with a Nismo badge on it.

one question...is the car at the S n S and the car in HPI the same car?

Nismo does not fit Trust turbos to their vehicles, but thats just the start.

HI THERE :)

NOT REALLY THAT IMPRESSIVE AT ALL - ITS NO WONDER YOURE GETTING MUDDLED ABOUT THERE BEING "2 CARS" THAT LOOK SIMILAR BECAUSE THEY ARE BOTH ONE IN THE SAME CAR - NOW I SEE WHERE YOURE COMING FROM - I THOUGHT YOU THOUGHT MY OTHER SKYLINE WAS A KEY FACTOR TO CONSIDER - NOT AT ALL - IT WAS A SERIES 2 PILE OF SHITE !! - THE 2500R "PROTOTYPE" "DEMO CAR" I BOUGHT IS A "TWEAKED" AND "FACELIFTED" GTS-25T - THE ONLY REAL IMPORTANT THING ABOUT THE CAR I HAVE IS THAT IT IS "THE CAR" THAT WAS PULLED OFF THE PRODUCTION LINE AND GIVEN SOME SPECIAL ATTENTION - WHEN I ORIGINALLY GOT IT ALL I KNEW WAS THAT IT WAS THE SECOND OUT OF THREE CARS THAT WERE USED FOR DEVELOPMENT IN THIS WAY - IT CERTAINLY WASNT AS YOU SEE IT TODAY - THERE WERE BITS MISSING AND BITS ON IT THAT HAD TO GO - IT HAD TOO MANY MIX MATCHED THEMES THAT WERENT WORKING HARMONIOUSLY TOGETHER - WHAT WAS WORKING WELL WAS THE FACT THAT GT-R PARTS WOULD EASILY AND READILY BE UTILISED - A GT-R INTAKE PLENUM WAS STILL IN THE BOOT WITH ASSORTED ADAPTER SHIMS AND GASKETS ALONG WITH A HAND WRITTEN LIST IN JAPANESE ON NISMO LETTERHEAD OF OTHER GT-R PARTS EARMARKED FOR INSTALLATION - IT HAD THE RIGHT BLOCK FOR THE CHASSIS (I HAD THAT CHECKED WITH NISSAN IN JAPAN) AND ALL THE CORRESPONDING ID PLATES ALSO MATCHED THOSE NUMBERS WHICH HELPED - NOW THE ODDS OF FINDING A "GENUINE 2500R" IN JAPAN WELL THAT WOULD BE IMPOSSIBLE AS THEY NEVER WENT INTO PRODUCTION - AS POINTED OUT IN THE HPI ARTICLE THERE IS NO DEFINITIVE MOULD TO PLACE OVER ANY OF THIS OTHER THAN THE CARS WERE BEING USED AS DEVELOPMENT TOOLS WHICH IN ITSELF IS VERY OPEN ENDED - THE CARS WOULD HAVE ALL GONE THROUGH MANY MANY DIFFERENT CONFIGURATIONS DURING THEIR 2 YEAR TOUR OF DUTY - HOW DIFFERENT IS THE NEW GTR IN RELATION TO THE PROTOTYPE THAT WAS BEING SHOWN 5 YEARS AGO - WITH ALL THE INFORMATION I HAVE BEEN ABLE TO SOURCE OVER THE PAST 7 YEARS I KNOW THAT WHAT HAS "EMERGED" IN MY CAR IS A SOLID REPRESENTATION OF THE DIRECTION THAT WAS BEING FOLLOWED IN JAPAN HAD THE 2500R BEEN REALISED AS A STABLE MATE OF THE 400R AND BEEN "AWARDED" MASS PRODUCTION HOMOLOGATION - IT WASNT TO BE WHICH IN MY MIND IS OF NO CONSEQUENCE AS NOT EVERY IDEA EVER THOUGHT OF GETS SEEN THROUGH TO THE END - THE PLENUM AND TURBOCHARGER ARE JUST 2 ADDITIONS FROM A VERY LONG LIST OF DOZENS AND DOZENS THAT HAVE BEEN THOUGHTFULLY APPLIED OVER THE YEARS - ALTHOUGH SAYING THAT A LOT OF THE DECISION MAKING PROCESS DICTATES ITSELF ESPECIALLY WHEN FROM THE OUTSET THE INTEGRITY OF A "FACTORY SPEC. LOOK" WAS SERIOUSLY ADOPTED AND ADHERED TO - THE INTERESTING THING TO NOTE IS THAT NO ONE WILL EVER KNOW EXACTLY THE "GTX-1 2500R" BECAUSE IT NEVER ACTUALLY HAPPENED - OF 3 ATTEMPTS 1 REMAINS AS TESTIMONY TO WHAT "NEARLY DID" "ALMOST WAS" AND "COULD HAVE BEEN" - KEPT ME OUT OF THE PUB FOR ALMOST A DECADE TOO WHICH CANT HAVE BEEN A BAD THING !! - LATERS - ALL THE BEST - MALCOLM :D

Please, turn caps lock off.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...