Jump to content
SAU Community

Recommended Posts

Stay tuned Sougi fans...have just got way of the replacement oil, which is due out in a few months. I have no idea if it will be a group 5 or not, but it will be a full synthetic 10w40 known as Syn-X 6000. Will definitely be testing in my car upon release.

I will post more as I find out, and hopefully give you an idea of the retail price we'll be looking at.

Stay tuned Sougi fans...have just got way of the replacement oil, which is due out in a few months. I have no idea if it will be a group 5 or not, but it will be a full synthetic 10w40 known as Syn-X 6000. Will definitely be testing in my car upon release.

I will post more as I find out, and hopefully give you an idea of the retail price we'll be looking at.

Good stuff! Shoud have enough s6000 to see me through till it comes out!

hey guys seeing tho s6000 is not available would the m5000 be ok to run for a while til the syn x 6000 is released

Why wouldn't it be okay?

Mate, even the wrong oil isn't going to kill your engine as if it's poison. But for the record M5000 is merely the semi synthetic version of S6000.

hey guys seeing tho s6000 is not available would the m5000 be ok to run for a while til the syn x 6000 is released

You could put big w spec 25w 50 $5 for 5L oil in there and it would be fine, won't last long and if you are tracking it won't be optimal, but it won't do any harm.

About 20-30 bottles from memory.

yeah after doing alot of research on this i have worked out that it wont do harm i just wanted to find the most optimal oil for a rb25det

There is no such thing...every engine is different.

There are only oils and better oils. Experiment, find out what you prefer, both in viscosity and brand. Most people here are happy with 10w40 in various brands.

Interesting thread..

Just a couple of thoughts,

The DIY oil industry is a trillion dollar market, and most of the advertising claims reflect the grab for market share.

Ultra low viscosity oils (0w/20, 5w/30 etc) were developed for below freezing starts and increased mileage benefits..and not extended engine longevity.

Running these oils at startup in moderate/warm climates means your running oil the consistancy of machine oil at a time when clearances haven't stabilised and lubrication is minimal.

Your engines lubricating system, oil pump and bearing clearances were not designed to run such oils.

In this country SAE recomends 10w/30 and 10w/40, like most manufacturers do for 90's vehicles, for ambient temps in most areas. better to stick with that range in a quality oil.

Oil viscosity ratings, and tests are conducted on clean oil stocks in a lab environment, and don't reflect oil thats been running in your engine for the last 2 months or more.

Using Delvac or any diesel oil will cause oil leaks in any mid to high mileage engine, as they contain a very high level of detergents.

Synthetic oils become contaminated just the same as dino oils do, with combustion by-products, blow-by, fuel contamination and condensation. Using extended change intervals means running contaminated oil for longer periods.

Running expensive syn racing oils for OEM recomended change intervals can be very expensive, and probably has a very limited benefit.

Filters are as important as the oil your using, maybe even more so, if you choose the wrong one.

There's no substitute for oil film strength in a perf engine, so viscosity should match the upper level recomended in the SAE range for the appropriate ambient temperature.

When it comes to recomended viscosities, who are you going to trust..the manufacturer (who pays for warranty claims) the oil companies? or the guy at the store.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...