Jump to content
SAU Community

Recommended Posts

New Skyline owner here, stock 1990 GTS-t Just did an oil and filter change, it needed it badly, was starting to make lifter noise and the old oil was quite black. Went into Repco to check what they had, and came out with 5L of their own brand (blended by Penrite) semi synthetic 10-40W, a filter and a bottle of Nulon engine oil flush, all for pricely sum of $49. Put half the Nulon in at the car park and drove it 4km gently home, then put the remainder in and idled for 10 mins. Drained for 30 mins screwed in the new filter and refiled with the Repco oil.

No more lifter noise, idle is smooth as and free revving, engine only has 60 000 on it and still seem nice and tight, oil pressure at idle is just above 2 and just under 4 when revved, oil consumption is next to zero.

Any opinions on Repco Semi Synth 10-40? Since this motor is quite fresh should I be looking some 5-30 for my next change, or should I stick to the 10-40 since I live Qld.

Cheers

Mike.

Edited by Missileman
Any opinions on Repco Semi Synth 10-40? Since this motor is quite fresh should I be looking some 5-30 for my next change, or should I stick to the 10-40 since I live Qld.

Cheers

Mike.

Can you post some specs on it? I honestly wouldn't trust something like that, they probably have developed it to undercut their other products and make a decent margin on it. Semi synth sounds av.

I would go for one of the full synths mentioned in this thread for $59, you don't need the engine flush crap.

Couldn't find a spec sheet at the Repco site, so the only information available is what is written on the package...

if its one thing ive learnt from owning a skyline, you cant go buy cheap shit like that, its generic repco stuff, you aint driving a commondor or ford anymore, these cars are performance!! I used to own a commondor and the oil was like $20 but now owning a skyline I get the good stuff $65 5litre bottle of 4100 MOTUL, you cant run cheap semi synth in ya RB, thats just a heads up, even if you do, you will probably have to change it more often

Couldn't find a spec sheet at the Repco site, so the only information available is what is written on the package...

if its one thing ive learnt from owning a skyline, you cant go buy cheap shit poo that, its generic repco stuff, you aint driving a commondor or ford anymore, these cars are performance!! I used to own a commondor and the oil was like $20 but now owning a skyline I get the good stuff $65 5litre bottle of 4100 MOTUL, you cant run cheap semi synth in ya RB, thats just a heads up, even if you do, you will probably have to change it more often

Couldn't find a spec sheet at the Repco site, so the only information available is what is written on the package...

I mean even the cheapest oil out there is going to be fine for daily driving, it is only when you are out tracking it or giving it a good run through the hills that you want to better oils that don't break down and burn. However when the price difference is so tiny, you might as well get a known really good oil like Motul 8100 but don't spend more than that, eg the chrono oil etc which is over $120, that isn't value for money.

Leave it in there until next change, but next time go something a bit more quality.

The car is my new daily drive and it has an auto transmission so it's likely to never see a race track, a nice brisk run up mountain road is another story. At $36 including a free oil filter and being produced by Penrite convinced me to give it a try, if I can find the $60 full synthetic without having to travel too fare out of my way then I'll give it a go next change.

Edited by Missileman

The car is my new daily drive and it has an auto transmission so it's likely to never see a race track, a nice brisk run up mountain road is another story. At $36 including a free oil filter and being produced by Penrite convinced me to give it a try, if I can find the $60 full synthetic without having to travel too fare out of my way then I'll give it a go next change.

Go to your local autobarn, get the gulf western synx-3000

Probably one of the best semi synths out there and i rate it better than the nulon full synth

Will be on my 3rd change shortly

I get the good stuff $65 5litre bottle of 4100 MOTUL, you cant run cheap semi synth in ya RB, thats just a heads up, even if you do, you will probably have to change it more often

lol, motul's 4100 range IS semi-syn (that's what the "technosynthesse" on the bottle means)

not that there's anything wrong with semi syn, you need a mineral content to run ethanol based fuels like e85 and i ran my old 25 on 4100 turbolight for 3 years @ 300rwkw before it popped

if its one thing ive learnt from owning a skyline, you cant go buy cheap shit like that, its generic repco stuff, you aint driving a commondor or ford anymore, these cars are performance!! I used to own a commondor and the oil was like $20 but now owning a skyline I get the good stuff $65 5litre bottle of 4100 MOTUL, you cant run cheap semi synth in ya RB, thats just a heads up, even if you do, you will probably have to change it more often

what about all those RB30 powered commodores and R31's that are still going perfectly fine after 1 million k's running on Coles brand oil

it isnt a Bloody F1 motor

what about all those RB30 powered commodores and R31's that are still going perfectly fine after 1 million k's running on Coles brand oil

it isnt a Bloody F1 motor

My 31 loves the $13 gulf western oil!!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
    • engine wise almost no mods: stock ecu Greddy front mount intercooler Greddy forward facing intake w R33 TB stock fuel system, stock injectors, rail etc. Kakimoto racing hyper 3 inch exhaust system Apexi intake filter New NGK –R BCPRES (.8 gap) plugs  
    • Nice one @Pac - looks like a fair few 1600's there! 
×
×
  • Create New...