Jump to content
SAU Community

Recommended Posts

Hey guys

If you are interested in translated workshop manuals for either model Stagea, please register your interest here;

http://www.jpnz.co.nz/afawcs0131170/CATID=...1/products.html

They do require around 150 requests and are looking at around $100NZD per manual if those numbers are achieved.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/232599-translated-workshop-manual-m35-c34/
Share on other sites

Hey guys

If you are interested in translated workshop manuals for either model Stagea, please register your interest here;

http://www.jpnz.co.nz/afawcs0131170/CATID=...1/products.html

They do require around 150 requests and are looking at around $100NZD per manual if those numbers are achieved.

Cheers.

15 now yay :P

Hey guys

If you are interested in translated workshop manuals for either model Stagea, please register your interest here;

http://www.jpnz.co.nz/afawcs0131170/CATID=...1/products.html

They do require around 150 requests and are looking at around $100NZD per manual if those numbers are achieved.

Cheers.

Im in, bloody good idea if u ask me

Is the manual a full stagea manual? with all info on everything?

Im in, bloody good idea if u ask me

Is the manual a full stagea manual? with all info on everything?

I should think so as they have already done the owners handbook (around 250 pages) which cost me about $35

I hope it's better than the WC34 owners manual they do.
I don't want to appear overly defensive but the 258 page booklet they do is a translation of the Nissan Stagea handbook, which like all such handbooks is merely an introduction to the operation of the cars and lacks the technical detail of a workshop manual...or are you critical of the standard of translation or printing carried out by JPNZ?

i have a r34 workshop manual in english on PDF format... i got it off ebay for 6 bucks and it looks like its been scanned... the file is about 12MB but if anyone wants it you can pm me and i will send via attachment to your email or sumthin... has all the engine specs and electrical...

  • 3 weeks later...
Hey guys

If you are interested in translated workshop manuals for either model Stagea, please register your interest here;

http://www.jpnz.co.nz/afawcs0131170/CATID=...1/products.html

They do require around 150 requests and are looking at around $100NZD per manual if those numbers are achieved.

Cheers.

Do you know were I can get the Jap version of this.....need the wiring diagram? The M35 with the VQ25det motor

Edited by Jetwreck

Have a look at these places for free downloads of workshop and user manuals.

http://perthmods.net/fluent/text/Car_Manuals/

http://carfiche.com/manuals023/cars/

http://pdftown.com/Pdf-eBook/Nissan.html

http://www.onlinefreeebooks.net/

http://www.pdfoo.com

http://www.onlinefreeebooks.net

All located using my friend Google.

I've downloaded quite a few full english workshop manuals in pdf for years 1989/90 -> 1998 Approx.

R32,R33,R34, 280Z, 300Z etc....

R33 & R34 workshop manual apply to the Series 1 & 2 Stagea, which appears the same as

which you actually get from jpnz.

I've downloaded the two copies of each manual from different sources to

ensure they are the same/accurate.

Do you know were I can get the Jap version of this.....need the wiring diagram? The M35 with the VQ25det motor

I have seen them on Import Monster from time to time as a book or as a CD.

CD would be good. You could just copy to HDD & use the translator in word.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...