Jump to content
SAU Community

Recommended Posts

Guys I just wanna say its more than possible for a car to have low klms-obviously depending on age- mine had- 14400klms when I imported but it was only 20months old & compliers certified my odometer. Japan is a small tight place so 5-10000klm pa is prob the norm compaired to 10-20000 for most Aussies. Sure Ive seen some shockers also but there are usually some indicators ( plastics/ leathers, engine etc)

Ditto, my 2003 came into the country in 2008 with 19,000klm on the clock. Had log book and Jap auction papers to match. Also the interior/exterior condition of the car matched. Having said this, no one takes into consideration the time the car is spent actually running. The Japanese drive short distances but spend a long time doing so.............think about it. Imports should really have timers not speedometers :)

  • Like 1
  • 4 weeks later...

Hi Guys,

I just got my baby transported to the local wharf last week. I couldn't bare to wait for DETORS to drag their high heels lol :P so I elected to drive her home while I wait. Then return for the Sticker on a temporary unreg permit. I gave her a good soak and wash... :)

Side_zps0fbc8dbf.jpg

Side_door_open_zpsd9b4e12a.jpg

Front_zps4f8358c7.jpg

Interior_zpsfda91af8.jpg

  • Like 2

That is called the "fauve" interior. Factory option and looks very nice.

Thanks for that, my Chrome translator has always called it Fobu... different type of leather to the black and beige and manditory with the faux wood interior... So much better than the beige but strangely less popular..

Only ever saw one sedan with tan and cruise.... Gave up on both in the end..

Edited by nickcorr

Brought a set of 350Z wheels yesterday, threw them on last night and its now currently getting a balance/alignment =)

20140929_094650_zpsd7494846.jpg

Very happy with the overall look of the car for now. Would still like to drop it an inch or so but i'm not in any hurry.

Brought a set of 350Z wheels yesterday, threw them on last night and its now currently getting a balance/alignment =)

20140929_094650_zpsd7494846.jpg

Very happy with the overall look of the car for now. Would still like to drop it an inch or so but i'm not in any hurry.

Was wondering what they would look like on a V35, now I know that they look bloody fantastic!

  • Like 1
  • 2 weeks later...

So over the last few months I've been doing a few aesthetics changes to my V36...powder coated wheels, angel eyes in my headlights and blacked out roof and grille. Debating to black out the side mirrors and fully black grille or to leave it...? Thoughts?

post-58979-14129294203389_thumb.jpgpost-58979-14129294720028_thumb.jpgpost-58979-14129294990421_thumb.jpgpost-58979-14129295512894_thumb.jpgpost-58979-14129295691182_thumb.jpgpost-58979-14129296104048_thumb.jpg

  • Like 1
  • 1 month later...

Hello guys! First time posting, although signed up on this forum a while back.
Got my V35 Coupe MT December last year and it has been an amazing car so far!

Car is basic package (no satnav or BOSE) but seems it was lightly modified in Japan by the Japanese ower.
It has TEIN height adjustable coilovers and Fujitsubo Legalis R? (not sure) Y pipe and exhaust. According to

previous owner, ECU was modded in Japan too but speed limiter (180Km/h) not removed so maybe not...

Car has been alright in fuel and it makes average of 9.8L/100Km, 70% freeway 30% suburb drive.

Anyways, a quick and fun car to drive!

post-133804-0-32318100-1415754980_thumb.jpg post-133804-0-42999400-1415755016_thumb.jpg post-133804-0-41179600-1415755017_thumb.jpg

Door lights upgrade

post-133804-0-59444000-1415754996_thumb.jpg post-133804-0-53902400-1415754999_thumb.jpg post-133804-0-56135800-1415754998_thumb.jpg post-133804-0-27079800-1415755019_thumb.jpg

Changing my RAYS TE37 to SSR GTV03 that I bought in Japan last August! Took nearly 4 months to get them as the manufacturer in Japan needed to make them...

I brought the front two as check-in baggage first as the size was available but the rears where not ready when I came back from holidays from Japan. My aunt posted the rear wheels to me in Melbourne and it finally arrived yesterday! The TE37s are much lighter but change in the look counts too!

post-133804-0-25900600-1415755010_thumb.jpg post-133804-0-50380900-1415755011_thumb.jpg

SSR GTV03 Matt Black

Front 18" 8.5J +22 (11Kg)

Rear 18" 9.5J +22 (11.20Kg)

Same as my TE37s to keep the current spec. Will fit them very soon! Just put some rim guard yesterday.

post-133804-0-16596100-1415755014_thumb.jpg post-133804-0-34906100-1415755015_thumb.jpg post-133804-0-36249100-1415755018_thumb.jpg post-133804-0-27176200-1415754983_thumb.jpg

Currently using SUMITOMO HTR ZIII 245/40/18R on the front and 265/35/18R on the rear.

Not bad tyres for the price but the inner side of the rears are wearing badly due to slight camber.. ;[

post-133804-0-03514900-1415755020_thumb.jpg

post-133804-0-89473500-1415755000_thumb.jpg

Edited by allankt86
  • Like 1
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...