Jump to content
SAU Community

Recommended Posts

Does anyone have a definite list of stations stocking E85?

I am working on a facebook group to get the word out on E85:

http://www.facebook.com/groups/edit.php?su...gid=32246238262

Edited by dano4127

i did a service on the car after the 2 weeks of running e85.

The fuel filter was blocked. When i mean blocked i mean you really had blow hard to get any air going through the friggin thing. Now i have been lazy and have not changed the filter in about a year as well so that might have had something to do with it.

Another thing i noticed is the line between the steel fuel line to the fuel filter had cracks all over it, kinda feels perished, it will need to be replaced in the next week or so.

I also got 450km's to a tank of Mobil Synergy 8000 (98) over the weekend, mixture between freeway driving (300km's) and around town.

So yeah the difference in a tank of fuel is about 130km's

fuel filter would be as every page i've read says change your fuel filter after a tankful of E85, it loosens all the shit in your tank. perished hose would probably have more to do with the gigawatts he's running under the bonnet :thumbsup:

did you check this stuff before? is t deff from the 85?

Nope. have not checked it in over a year :rofl: but i did read you need to check after you run e85. so i did.

Filter was soo blocked hey, ive never seen a filter so blocked before. EVER.

fuel filter would be as every page i've read says change your fuel filter after a tankful of E85, it loosens all the shit in your tank. perished hose would probably have more to do with the gigawatts he's running under the bonnet :)

Yeah 3.74 gigawatts :thumbsup:

nah... i think i have chucked it out tooo... just a standard ryco.. if i still have it i will find a way to hack it up :)

Guilt-Toy.

Did you cut the filter open to ensure it was blocked from gum and shit rather than the media collapsing?

Which brand filter was it? The usual ryco?

From another site , it's supposed to be the first servo on the left hand side past the Mechano set (intersection of Hume Hwy/Liverpool Rd and Woodville Rd) heading south . I believe it's locked and you need to go inside and see Sid who will check your car out for it .

I'd just like to be able to get it in my fuel containers so hopefully that won't be a problem .

I can understand servo owners being a bit concerned about letting people toss it in the tanks of cars not specifically designed to run it . In proper fuel containers it should be ok and relieve them of any legal dramas .

Cheers A .

Excellent thread, Guilt Toy. There is some very good info' in here.

It would appear, after reading your results, and info' on other sites, that the E85 'picture' is looking very good indeed.

I've elected to upgrade to 780cc injectors, which would appear to be more than capable of supporting mid 300rwkw based on your results.

The plan is to do a tune for 98, 110 Martini and E85. I'll be sure to post my results - aiming for sometime later this month (20th?).

hey mate

I think i played wow with your girlfriend a few times lol

Anyway i think once you play around with e85 you won't look back. its a great fuel to use because its too cheap :P post your results should be good.

Excellent thread, Guilt Toy. There is some very good info' in here.

It would appear, after reading your results, and info' on other sites, that the E85 'picture' is looking very good indeed.

I've elected to upgrade to 780cc injectors, which would appear to be more than capable of supporting mid 300rwkw based on your results.

The plan is to do a tune for 98, 110 Martini and E85. I'll be sure to post my results - aiming for sometime later this month (20th?).

hey mate

I think i played wow with your girlfriend a few times lol

Anyway i think once you play around with e85 you won't look back. its a great fuel to use because its too cheap :banana: post your results should be good.

Hey mate,

Ah yes, good ol' whatshername hey? :)

I'm certainly hoping that's the case. Will do.

I see in Adelaide there is a shortage of E85 and most the servos were sold out!

Hopefully the situation is rectified prior to the 20th. I don't need much, half to a tank will do - for starters.

Hopefully the situation is rectified prior to the 20th. I don't need much, half to a tank will do - for starters.

you will go through a half a tank in NO time on the dyno ;)

you will go through a half a tank in NO time on the dyno :D

Thanks for the heads-up. I guess it stands to reason that dyno tuning to suit the E85 is going to chew through a fair quantity.

I have been told that E85 totally cleans your fuel system, even cleans the gunk out of your fuel tank.

So the fuel filter is needed to be changed very regularly until the system is completely clean.

Pretty soon most of the carbon will be out of the engine and your oil will come out as clean as it went in.

So i think a new fuel filter every 500km is on the cards for a while.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah and hence my ghetto way of slamming the brakes, get the ABS to cycle, rebleed seems to be a sensible workaround.
    • Hey! Happy to help. Nothing inherently wrong with the adapter, it's more so with Brett Collins himself. He gave me a lot of incorrect information when I was in contact with him and was extremely rude when I challenged him. He stated I could not use any aftermarket twin plate clutches except for his own, not to use the dush shield, bla bla bla and it was all BS.  Collins stated to cut roughly 14mm's off the housing, I took off 15mm to make room for the dust shield. I would confirm with whatever adapter manufacturer you're using. 
    • There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
    • The roof is wrapped
×
×
  • Create New...