Jump to content
SAU Community

Recommended Posts

and it's replies like that will fire him up even more use ya brains the more ya rave on about him the more you feed his ego and power trip better too just ignore him at least on a public furom .

ok, so if i switch over to a standard turbo and still have the braided lines, is it still defectable?

it depends a) if the lines have an ADR rating and b) if the state law permits it. Brake lines are OK if ADR approved, not sure about turbo lines - Call regency and ask them

-D

i know for a fact that braided brake lines are fine but must be adr approved and must carry the adr sticker,etc. But i don't know if you can get adr approved turbo water/oil lines?

Regardless if you had braided or not though,you need the stock turbo.

When calling up regency,ring 3 times,as you'll get different answers each time. They're as useless as service sa.

Word of advice from Officer Neil - "The best Skylines to drive are the standard ones".

I'm not too fussed about Officer Neil coming along to point out and confirm the boost controller to be defected. /start rant But what annoys me was the one that pulled me over for no apparent reason with the intention to defect and manages to only come up with "non standard air filter" anyway. /end rant

cock of shit! they'll still find something if they wanted to

just make it up , thats the aim of the game !!!

probably get defected for something like a supernautical cylinder in the engine -___________________-

Yeah +3. Most Skylines which come out of Japan at a minimal have coilovers and some form of larger exhaust.

Skylines are getting old, so people replace the stock parts.

What a fail of a comment.

Word of advice from Uncle Daniel: "The best cops are the cops who don't defect you for non-defectable items"

What, so it's not okay to drive a modified Skyline but it IS okay to drive a WRX with 22" chrome rims on it with LCD's on the firewall?

Why doesn't he start targetting other forms of modified cars... like Lancers with Evo bodykits and Canons.

Yeah +3. Most Skylines which come out of Japan at a minimal have coilovers and some form of larger exhaust.

Skylines are getting old, so people replace the stock parts.

What a fail of a comment.

Word of advice from Uncle Daniel: "The best cops are the cops who don't defect you for non-defectable items"

What, so it's not okay to drive a modified Skyline but it IS okay to drive a WRX with 22" chrome rims on it with LCD's on the firewall?

Why doesn't he start targetting other forms of modified cars... like Lancers with Evo bodykits and Canons.

Mate trust me when i say they look at wrx's! Mine is my daily and its still on standard rims slightly lowered and a cannon muffler and i get followed flat out all the time so its not just skyline's they look at!

So maybe everyone should avoid the Arndale area in general. I know I drove through there yesterday and I saw about 5 cops on the same road, thankfully I was behind some cars so they didn't see me at all I don't think.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...