Jump to content
SAU Community

Recommended Posts

Head was fully reconditioned but no porting was done. Tomei type B valve springs and new bronze exhaust guide inserts. Grex 264/9.3 cams. Tomei cam gears.

25psi boost.

BP 98 fuel.

Built and tunned by Jim at Dart Automotive.

It has plenty of response and mid range. Very happy with it.

Tim.

post-224-1286265041_thumb.jpg

This is my build thread but it hasnt been updated with new dyno graph above.

http://www.skylinesaustralia.com/forums/32...ld-t320793.html

Edited by R32 Zilla
good work, its definately got a 10 in it with a good driver :down:

definitely!

i did an 11.1 with 320awkw (if i changed into 4th across the finish line & not hit the limiter in 3rd, it would have been a 10)

with 390awkw it is well truly a mid 10

good work, its definately got a 10 in it with a good driver :down:

Give us a chance! haha. I only got 3 runs the other night before it rained and it was called off. I was getting faster with each run. We were slowly dropping tyre pressures. Got an 11.21 @130 on the last run with a 1.78 60ft. As some of you know its not as easy once you get up around this power especially on street tyres. With my old motor it was just a case of giving it everything to reach its potential. But yea it is easily capable of a mid to high 10 with either some more practise on street tyres or a simple tyre change would get me there.

This is no drag set up though. If I wanted it to be faster over 400m I would have chose different turbos/turbo and made 500kw which this motor could easilly handle. I chose the -5's for response on the street and for hill climbs and the circuit etc. I like corners.

Oh and the 390kw is RWKW not AWKW Marko. I dont think that makes a lot of difference but lets not start that debate again haha.

Tim.

i ran 10.98 @ 130.7 mph with 405awkw, on old street tyres, federal 595s. and worn out os giken clutch,

last week with 285kw stockis R32 GTR just power fc,exh, steel wheel turboes, 3/4 tank of fuel, spare wheel, jack, all interior in etc ran 11.7 @ 118mph on my 2nd run, got booted out cause i didnt want to renew my ANDRA licence,

i spent over 45g on my last GTR to get 10.98, my new GTR i have spent maybe 4g, big difference in costs to get from mid 11s into the 10s

oh and i didnt mean to start a big war on rwkw to awkw :P

Just a question that is kind of related to here; in my quest to get to 400kW :(... does anyone know if you can use Supertech bronze manganese valve guides with Ferrea oversize valves? Ferrea don't make any for the RB26 apparantly.

Just a question that is kind of related to here; in my quest to get to 400kW :(... does anyone know if you can use Supertech bronze manganese valve guides with Ferrea oversize valves? Ferrea don't make any for the RB26 apparantly.

I dont see any reason why you couldnt.

I may actually be able to join this list very soon!! things are finally looking good! tho it may be steves 500kw club!

i will be going GTRS on a built 2.6, 280 10.8's, E85, CR box with as much boost as it will allow 2 bar close.. then back it off to keep things together haha.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...