Jump to content
SAU Community

Recommended Posts

Sitting in traffic today I had a thought, what would the ratio of 300kw to 400kw cars be ? Or even, how many on here are in the 3's to give a comparison cause it looks like there aren't all that many in the 4's

I'm sending the car away tomorrow to get the exhaust fitted and an oil air separator made cause what's on there now is terrible.

Then, straight to the dyno :D

may i ask what is on there now ?? reason for asking is i just got an rb20 filter mount to get rid of the oil/water sep. way too much clutter. and yes i do know what it does and why its there :(

may i ask what is on there now ?? reason for asking is i just got an rb20 filter mount to get rid of the oil/water sep. way too much clutter. and yes i do know what it does and why its there :D

he is talking about a catch can setup, nothing to do with the factory heat exchanger.

I plan on cracking the 400 kw mark very soon..

Anyone willing to have a spare seat available this sunday in one ?..seeing as mine wont be ready yet.

N1GTR ??..yours sounds very nice. :P

What setup have you got for cracking the 4's?

I'd happily take you if mines ready, it's pretty much impossible to be there though cause it's not long enough to get the work done. If a late night happens on Saturday and it's all good I'll pm you. In saying that I'm expecting to need a lift aswel so tgeres no need for the supra

400rwkw is nothing these days, with all the quality parts available. Mine would have made it into the 500s if we didnt find the problems that we did. Still had plenty of boost to add and the nos.

Once i work out what im going to do with the bottom end I will up the fuel system and run it on E85

400rwkw is nothing these days

:P ... nothing? More like $20k and the rest (and you can double it if you want to make it super reliable), that is something, like a deposit on a house!

The head I want to build will be at least $4k in parts.

:P ... nothing? More like $20k and the rest (and you can double it if you want to make it super reliable), that is something, like a deposit on a house!

The head I want to build will be at least $4k in parts.

Agreed Bigmike. I shudder when I start adding up the dollar value of my engine.

400 kw will blow 90% of super cars out of the water And run 10 second passes across the 1/4 mile.

Hardly what i would call nothing.

400 kw will blow 90% of super cars out of the water

Which supercars make up that last 10%?

Ok Veyron would be a pick but being Australia none of us will ever find one of those at a set of lights.

I'd be very surprised if anyone lined up a 400kw+ gtr with a Supercar and didn't get smashed. End of the day look at the specs on factory supercars, what's wrong with us that we need this much power...I think we all need our heads read

Which supercars make up that last 10%?

Ok Veyron would be a pick but being Australia none of us will ever find one of those at a set of lights.

I'd be very surprised if anyone lined up a 400kw+ gtr with a Supercar and didn't get smashed. End of the day look at the specs on factory supercars, what's wrong with us that we need this much power...I think we all need our heads read

Mclaren, Zonda.

And shove ya gtr where the sun dont shine Steve, My rwd whale does the job quite nicely thank you. :P

Oooooooh of course

Silly me

So is that yor old trust box then?

haha, yer Close ratio.. or lag reducer :P should help the gtrs a little with low down response..

nar its a nismo uprated 34 gtr box. i think its just the prop shaft tho. could do with a set of new beefy synchros tho.

will have to come out for a drive. i promised tony i'd show him when i got that exhaust from him many moons ago!

haha, yer Close ratio.. or lag reducer :P should help the gtrs a little with low down response..

nar its a nismo uprated 34 gtr box. i think its just the prop shaft tho. could do with a set of new beefy synchros tho.

will have to come out for a drive. i promised tony i'd show him when i got that exhaust from him many moons ago!

You putting that big carbon dildo in ??

I'm back to Japan for awhile and sending mine back to Oz along with a whole lot of goodies that have been sitting in storage in my house in Jappa.

Hopefully I get my bloody car on the road by xmas.

You putting that big carbon dildo in ??

I'm back to Japan for awhile and sending mine back to Oz along with a whole lot of goodies that have been sitting in storage in my house in Jappa.

Hopefully I get my bloody car on the road by xmas.

Haha yeah mate going to give that dildo a shot.. keeping my fingers crossed... or going to be sending it back to acpt for a replacement!!

i'm looking at getting mine ready and done for easter next year for fosc @ bathurst.. should get close... even if i have to run these gtss turbos i have at home.

:ermm: ... nothing? More like $20k and the rest (and you can double it if you want to make it super reliable), that is something, like a deposit on a house!

The head I want to build will be at least $4k in parts.

I guess it comes down to what your starting with... My old 25 had tomei cams and tomei pistons when I bought the car running a TD06 made 300rwkw @17psi. I changed the turbo to twin t3/t4s, added 2 x 044 pumps, 1000cc injectors and made 399rwkw

Im pretty sure you could build 400rwkw for under 20k but my 26/30 ate up way more than that. lol

Edited by WHITER33GTS-T
Mclaren, Zonda.

And shove ya gtr where the sun dont shine Steve, My rwd whale does the job quite nicely thank you. :ermm:

Oh yeah the last Zonda i was up against gave me a hard time lol

Pipe down you banana bender, less forums and more road trips down here from you thanks. We have 4 Wakefields next year.

haha, yer Close ratio.. or lag reducer :D should help the gtrs a little with low down response..

nar its a nismo uprated 34 gtr box. i think its just the prop shaft tho. could do with a set of new beefy synchros tho.

will have to come out for a drive. i promised tony i'd show him when i got that exhaust from him many moons ago!

You need capacity :ermm:

Let me know when you're at Tony's, ill come round, he's 1 street away

Oh yeah the last Zonda i was up against gave me a hard time lol

Pipe down you banana bender, less forums and more road trips down here from you thanks. We have 4 Wakefields next year.

So when do we get to see the calender. will hopefully make at least a couple of them.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...