Jump to content
SAU Community

Recommended Posts

Congrats and good to see u are still waving the GTRS flag :)

-10s on my 26/30 was a weapon. Great combo imo!

Good to see a result mick!!!

Thanks guys, it only been 2 1/2 years coming :unsure:

I quite like the RSs on the 3.0, there's good drive down low and they push all the way to 8k :yes: makes it nice to drive and gives it plenty of punch when asked

needs more big single Mick :P

ah yes and we know you know all about big singles :domokun:

How much torque were you making . At 623 hp .

I have a 3582r going on mine kford doing my head interesting results on ya cam choice .must be very responsive I would like to know he ideal lift and duration who is making your custom cams I miggt get kelford to grind me some custom ones but knowing the spec would be great

IIRC it was about 800nm @ about 5200rpm

the cams I am hoping to get done are going to be hard on the valve train and since I have a few cars it doesn't matter if it sits around for a bit here and there, for a every day car Pauls ones from Unigroup are what I recommend, 260 x 10.8, this I have already posted in your thread

I went from 260 x 9.15 lift back to 250 x 9.15 lift on the old 2.6 and it made the same peak power just 800rpm sooner

IIRC it was about 800nm @ about 5200rpm

the cams I am hoping to get done are going to be hard on the valve train and since I have a few cars it doesn't matter if it sits around for a bit here and there, for a every day car Pauls ones from Unigroup are what I recommend, 260 x 10.8, this I have already posted in your thread

I went from 260 x 9.15 lift back to 250 x 9.15 lift on the old 2.6 and it made the same peak power just 800rpm sooner

Cheers I hope these soecs will do me well on track aswell on e85. I will talk to kelford see if they can do a custom grind

IIRC it was about 800nm @ about 5200rpm

the cams I am hoping to get done are going to be hard on the valve train and since I have a few cars it doesn't matter if it sits around for a bit here and there, for a every day car Pauls ones from Unigroup are what I recommend, 260 x 10.8, this I have already posted in your thread

I went from 260 x 9.15 lift back to 250 x 9.15 lift on the old 2.6 and it made the same peak power just 800rpm sooner

When you say will be hard on ya valve train is that because of such a big lift

When you say will be hard on ya valve train is that because of such a big lift

How fasts the valve accelerates and decelerates. You need a firmer spring to keen the bucket on the lobe... That causes wear.

Who cares! Change them when they wear. Give me powah!!!

How fasts the valve accelerates and decelerates. You need a firmer spring to keep the bucket on the lobe... That causes wear.

Who cares! Change them when they wear. Give me powah!!!

bugger, you beat me to it

the other thing that concerns me is the belt, it is basically a rubber band after all, and yes, all in the name of powah and going fast

bugger, you beat me to it

the other thing that concerns me is the belt, it is basically a rubber band after all, and yes, all in the name of powah and going fast

The rubber band.

Yeah. I know HKS say on their vcam the belt needs to be changed every 10,000 kms.

Being a jap cam it would be soft as a pensioners turd but the acceleration (and load on the belt as the intake cam retards with revs) would be significant.

R34 GTR

593awhp/445awkw @ 24-25psi

RB26/30DETT

HKS GT-RSs, yes fancy -10s

250 x 9.15 poncams

ARC cooler

ID1300s

custom twin 3" into single 4" exhaust

Syvecs S8 ecu

attachicon.gifimg082.jpg

has done 623awhp/467awkw @ 28psi

attachicon.gifiphone 5 dyno update 032 (1280x960).jpg

congrats on the results

any feedback on the ID1300 injectors?

  • 2 weeks later...

R34 GTR

593awhp/445awkw @ 24-25psi

RB26/30DETT

HKS GT-RSs, yes fancy -10s

250 x 9.15 poncams

ARC cooler

ID1300s

custom twin 3" into single 4" exhaust

Syvecs S8 ecu

attachicon.gifimg082.jpg

has done 623awhp/467awkw @ 28psi

attachicon.gifiphone 5 dyno update 032 (1280x960).jpg

Went to the drags tonight

Car weighed in at 1661kgs plus 108kgs for me

And with a less then Ideal run it ran 10.88 @ 132.23mph on 24psi and was politely asked to GTFO :)

  • Like 3
Went to the drags tonight

Car weighed in at 1661kgs plus 108kgs for me

And with a less then Ideal run it ran 10.88 @ 132.23mph on 24psi and was politely asked to GTFO :)

Nice one do you normally drag it or cicuit ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...