Jump to content
SAU Community

Recommended Posts

so the s2 rwd stageas can be converted with a v35 6 speed geabox conversion kit from the post stated a few posts above ?

No body has done it, but it seems pretty straight forward. Need the interior bits and pieces, pedals, and hydraulics too. Then figure out if the ecu needs any auto gearbox inputs.

Give it a go I say ;)

No body has done it, but it seems pretty straight forward. Need the interior bits and pieces, pedals, and hydraulics too. Then figure out if the ecu needs any auto gearbox inputs.

Give it a go I say ;)

well if my mates can fit a 260 boss engine into their r33 drift car, i cant see how they couldn't do this! waiting on advanced jap auto imports to give me a price.

Edited by adambruv

well if my mates can fit a 260 boss engine into their r33 drift car, i cant see how they couldn't do this! waiting on advanced jap auto imports to give me a price.

Anything is possible depending on your determination and funding. Been proven as dcdc is building a manual m35 with a r34gtr gearbox. Scotty was looking at a 350z 6 speed a while ago and I think the issue was the tunnel fitment when can be massaged to make fit.

well if my mates can fit a 260 boss engine into their r33 drift car, i cant see how they couldn't do this! waiting on advanced jap auto imports to give me a price.

Getting the mechanicals in place will be the easiest part of an NM35 manual AWD conversion.

Getting all the ECU's to play nice with one another, will be the trick with this one.

  • 2 months later...

The starter motor is on the other side I am fairly sure, you would have to compare the two to see if the 3.5 sump might be able to be used? Running the manual V35 3.5L engine, ecu's, bcm, relay box etc and wiring loom would be a must I think, and a great can of worms.

Hopefully the chassis is similar enough, otherwise nothing might fit. The AWD stagea chassis is completely different to the V35 chassis...

The Stagea 350s came in a 6 speed manual, it was an Autech version. I reckon if you could get that in your VQ25DET it would be sweet....if you can get it in.......if it is suitable....if it was cheap enough ...so many if's

Jules

Yes, I watched one of the Autech 6 speeds at Japanese auction house with 70,000k's sell for $12,000 nzd. 3 times more than standard M35 and auto Axis models. They only come in a 2.5L engine I thought with the 6 speed.

The starter motor is on the other side I am fairly sure, you would have to compare the two to see if the 3.5 sump might be able to be used? Running the manual V35 3.5L engine, ecu's, bcm, relay box etc and wiring loom would be a must I think, and a great can of worms.

Hopefully the chassis is similar enough, otherwise nothing might fit. The AWD stagea chassis is completely different to the V35 chassis...

So the best bet is actually a complete engine swap including the transmission, starter, sump etc to a 3.5, rather than keeping the 3.0DD in there

Yeah thats true.

Yeah the guy over here did his with a toyota box IIRC. Same as the ones in supras etc. Think the 30det was out of a Cedric or Gloria.
Looks like the best way to go really, although I would like to keep a nissan box in there, I'm kind of strange like that.

A car swap is the way to go, but I like my car. The blue with the aero kit is hard to come by over here in NZ

Nz engineers report, certification, teething problems etc.

I've always driven manuals, current work vehicle is a 6 speed, totally over it. Can't wait for the auto wagon to arrive.

Gone for me are the days of spending thousands of dollars to modify some shit box I purchased, only to sell it later and lose money.

Save the cash, buy the vehicle you really want that doesn't require a gas axe, maybe get a few bolt ons.

The vehicle will have a good resale value cause it has not been modified.

Nz engineers report, certification, teething problems etc.

I've always driven manuals, current work vehicle is a 6 speed, totally over it. Can't wait for the auto wagon to arrive.

Gone for me are the days of spending thousands of dollars to modify some shit box I purchased, only to sell it later and lose money.

Save the cash, buy the vehicle you really want that doesn't require a gas axe, maybe get a few bolt ons.

The vehicle will have a good resale value cause it has not been modified.

I can get all that, half my family is in that business.

I've only had manuals up until now, I'm not 100% sure whether I'd be over the auto if I got it done, but I think it would add something to the car.

However, I completely see where you are coming from, and I agree with the good resale value.

Nz engineers report, certification, teething problems etc.

I've always driven manuals, current work vehicle is a 6 speed, totally over it. Can't wait for the auto wagon to arrive.

Gone for me are the days of spending thousands of dollars to modify some shit box I purchased, only to sell it later and lose money.

Save the cash, buy the vehicle you really want that doesn't require a gas axe, maybe get a few bolt ons.

The vehicle will have a good resale value cause it has not been modified.

Couple of things I don't agree with. :D

If you're ganna get cut about the resale of yo modified car doesn't that defeat the whole modifying purpose in the first place? When I buy shit for the car I don't think "fu*k, this is going to fu*k my resale value to all fu*k and beyond."

I also don't agree with the "good resale" part... Good resale to me is a profit, property normally has good resale not cars.

I modify my car for personal gain, as in learning something and my own limits of what I can do. To me my car brings value to me in terms of enjoyment, I enjoy seeing it become something else that I've done or achieved with the car.

  • Like 4

Couple of things I don't agree with. :D

If you're ganna get cut about the resale of yo modified car doesn't that defeat the whole modifying purpose in the first place? When I buy shit for the car I don't think "fu*k, this is going to fu*k my resale value to all fu*k and beyond."

I also don't agree with the "good resale" part... Good resale to me is a profit, property normally has good resale not cars.

I modify my car for personal gain, as in learning something and my own limits of what I can do. To me my car brings value to me in terms of enjoyment, I enjoy seeing it become something else that I've done or achieved with the car.

agree whole heartedly. plus they way i look at it the only better wagon in the world is an Audi RS6 which is damn expensive so spending a few grand to make it compare with an RS6 is worth it as i still saved nearly $200K :D

  • Like 1

Couple of things I don't agree with. :D

If you're ganna get cut about the resale of yo modified car doesn't that defeat the whole modifying purpose in the first place? When I buy shit for the car I don't think "fu*k, this is going to fu*k my resale value to all fu*k and beyond."

I also don't agree with the "good resale" part... Good resale to me is a profit, property normally has good resale not cars.

I modify my car for personal gain, as in learning something and my own limits of what I can do. To me my car brings value to me in terms of enjoyment, I enjoy seeing it become something else that I've done or achieved with the car.

I only ever start thinking about the " oh fu€k " when I go to resell, end up losing money and wish I had more money to spend on my next vehicle. Lack of funds = missed opportunity.

Good resale is not losing crap loads of money, you don't need to make a profit. If I broke even at a point of sale, then I was happy.

Most of the time with modified vehicles, I ended up spending lots of money, investing lots of time, stuck with a highly modified old car by the time I got bored with it. People were reluctant to buy because they don't know what kind of "can of worms" it was and for the same asking price, could purchase a newer more modern car that had superior design and engine qualities stock standard.

I guess I just got tired of always being broke.

agree whole heartedly. plus they way i look at it the only better wagon in the world is an Audi RS6 which is damn expensive so spending a few grand to make it compare with an RS6 is worth it as i still saved nearly $200K :D

Yeah, that's until VW release the Golf R wagon...

ge4817405686714551991.jpg?height=290&aspge4621749494090823862.jpg?height=290&asp

ge4882115345865930879.jpg?height=290&aspge5610221529843885781.jpg?height=290&asp

http://www.motoring.com.au/news/small-passenger/volkswagen/golf/spy-pics-volkswagen-golf-r-estate-42493?utm_content=bufferabd6c&utm_medium=social&utm_source=facebook.com&utm_campaign=buffer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...