Jump to content
SAU Community

Recommended Posts

i've got trackvision. i've only done 1 clip with bad data.

http://www.vimeo.com/4835983

i still have to tidy up the dash. And traqmate (logger) are making a new firmware to fix the sync problem

Edited by sav man

More from the POV & Duncan last weekend: SAU NSW Track Day @ Oran Park

I know it's one of the more expensive options but I think it delivers - this is the third kind of set up we've run and have never had bad in-car with it. Best of all it's the easiest to set up and use - even non-techies like me can manage it!

LOL, unless you want to send it to India so i can take it to the UK...lol i think i just need to pony up and grab a Pov1.5. Only my earlier question regarding Ii there any real difference between the Pov 1.5s 720x480 and another camera i am looking at which has 720 x 576???

POVs are only about AUS$850 in the UK so planning on picking one up with a new helmet before my next track day

I've been playing with a couple of different "cheap" setup's.

If you're looking for the best solution < $150 then I think the best is to get a suction mount (ebay special) and a cheap point and shoot that does video. Quality of the video rises as the quality of the point and shoot.

Last year I bought an Oregon Scientific ATC2k. It's mounted on the front bar. The sound is horrible due to wind noise and being right next to the blow off (yes, I should plum back the atmo). The video tends to wash out, but the positive is that it is waterproof. Although how often do we honestly race in the rain? I just use this now for secondary video (e.g. postage stamp in the corner of the video).

Now my primary set-up is a point and shoot Casio EX-FC100 - it does 720 hd (and a lot more!). I'm very pleased with the quality of the video. Here is a video from the NSW Texi I took using using this setup:

(Video in the lower corner is from the ATC2k on the front bar "bumper cam")

It is really great for inside video but I'm a bit afraid to put my $400 camera mounted to the outside of the car.

The last set up is a CCD camera (reversing camera actually) hooked up to a camcorder kept in the glovebox. The CCD is a VERY cheap ebay special - about $40. Doesn't do sound so that is missing. The good thing is that it is small and I can put it pretty much anywhere on the car. I plan on doing some low slung behind the front wheel type shots. It is also weatherproof so have more options there. The image is only fair and the colors get washed out really easily. Also the auto iso adjust is a bit anoying because the image changes throughout as you go towards or away from the sun. Here is some video using that set-up:

Here is the type of mount I use for both. I was very surprised on the grip this little guy has. Had no problem with vibration and held the outside ccd camera @ 210 kph down the front straight! I just ordered two more off ebay for $15.

post-16200-1255036248_thumb.jpg

Bought mine direct from vio... pretty easy to deal with and received the next day (was in the US at the time).

edit: 600 or 650 for the moto kit with bits to hardwire to battery

Edited by DCIEVE
Now this looks the goods

Aim SmartyCam

Of course being AIM there is a bit of a price tag but would be well worth it and would keep it for a long time...

This looks terrific, and I have a CAN buss feed that I can send it. I think I will get one. Camera issue Fixed by the looks of it. :D

Now my primary set-up is a point and shoot Casio EX-FC100 - it does 720 hd (and a lot more!). I'm very pleased with the quality of the video. Here is a video from the NSW Texi I took using using this setup:

(Video in the lower corner is from the ATC2k on the front bar "bumper cam")

Considering this is a regular digital camera that can take video, be used every day of the week and costs only $350 it is as good as any of the $800+ dedicated track video cameras that will only ever get used on the track and no where else.

I think it is an absolute bargain.

I've got a $250 voucher for GoodGuys when I bought my tv, think I might have to throw in the extra $100 cash and buy 1 of these digital cameras with video recording for my next track outing.

Considering this is a regular digital camera that can take video, be used every day of the week and costs only $350 it is as good as any of the $800+ dedicated track video cameras that will only ever get used on the track and no where else.

That's pretty much the reason I bought mine. This Casio also does slow motion video. I can shoot 210 frames per second @ 480 x 360 res which is watchable. There are only a couple of consumer cameras that can do this that are under the $1000 price point. It also does 420 and 1000 fps but those are really unwatchable as the resolution drops to low.

It really does pretty good 720 hd video @ 1280 x 720 @ 30 fps with mono sound. One other drawback is that the maximum HD clip length is 10 minutes.

The only thing I wish it did better would be to be able to control the zoom while taking video. It's locked once you pres record. It also takes a bit to get use to the controls but that's because the camera does so much. Once you get used to it it's ok.

I also couldn't find many places in OZ that sell it. Even the camera shops. It's a real shame. I've owned lots of point and shoots but haven't had this much fun with one since digital photography first came out.

Oh, this is the place I bought mine on ebay. I was really impressed with the service for a Hong Kong based firm. The package you get is also very good including a large SD (you'll need it!) extra battery and little bag-o-goodies: LINK

Oh, other things it does that are unique:

Burst shot mode 30 x 6 megapixel shots in one second - catch that wheel lift over the ripples :)

Night shot mode that is better than any other camera I've seen - it uses the burst mode in high iso but then merges photos together to average an image

on top of that it's a pretty decent little still camera

Here's a couple of vids from Lakeside last week.

Specialised Driving Services kindly placed a new V Box Video in my car for a couple of session, I'm mighty impressed by it! Not cheap, but SDS is looking at putting on a rental fleet of these systems ;) Could be the go I reckon :down:

Interestingly Racelogic have just come out with a new cheaper version of the VBOX Video (Called VBOX Video Lite) - which is basically the same unit except it has a plastic casing, the secondary camera is a slightly lower resolution and it has different plugs - but will come in around $2K cheaper than the full unit (which if you price up a seperate camera, GPS logger and editing software is very comparable and yet this will be much easier to use).

Details - http://www.protechdevelopments.com.au/Data...B_Lite_DATA.pdf

Ah more like $2K (all the quotes I've had for the full VBOX Video with 2 cameras have been well over $4K).

Still POV = $1K, Driftbox - $900, Trckmate software = $200 - so as I said it works out comparable and thats only with 1 camera angle.

Has anyone tried using the track vision software before?

I'm going to try it out with the POV and a driftbox this weekend. It might be a cheaper option than Benny's super cool video box.

Trackvision is very flexible and gives great results... downside is the post event time for editing etc.

http://www.gjmaustralia.com/downloads/gjmIncar.wmv

http://www.gjmaustralia.com/downloads/cethana_0001.wmv

Think one of those may have Trackvision...

If not can upload one for you

TT984

  • 10 months later...

Awesome new HD In Car camera here now. Hi All. RaceRecall is now the Australian distributor for the Radcam HDPro. Full 1080P with internal/external power and internal/external microphone inputs. It's basically like a POV.1.5, but in full HD. Kit costs $649 with Race and Rally Packs available. It's already beed chosen for the new Aus series of Top Gear Australia and will be the onboard camera of choice for the ARC & ANDRA Pro Drag Racing on One HD. http://www.racerecall.com/radcam_hdpro-1.html and HD Video Samples

p036_1_00.jpg

Edited by martyboy26

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...