Jump to content
SAU Community

Tony Quin Wins Rally Tasmania

Wogboy

By Wogboy,
in R35 GTR

 Share

Recommended Posts

sav man Grand Master

sav man

Posted
Posted (edited)

I saw this car in action yesterday. it is unbelievably quick. But it is very hard on brakes, the officaials at the end of the stage said it was the onlt car to have glowing rotors at the end of the stage. And the once gold calipers have turned a poo brown colour because of the heat. I'll be interested to see how is lasts Targa Tas (esp if it's got proper rubber by then).

oh and it was the best sounding car in the field. only thing that is better is the lambo's (which weren't entered)

Edited by sav man
Snowman Grand Master

Snowman

Posted
Posted
I saw this car in action yesterday. it is unbelievably quick. But it is very hard on brakes, the officaials at the end of the stage said it was the onlt car to have glowing rotors at the end of the stage. And the once gold calipers have turned a poo brown colour because of the heat. I'll be interested to see how is lasts Targa Tas (esp if it's got proper rubber by then).

oh and it was the best sounding car in the field. only thing that is better is the lambo's (which weren't entered)

The Lambo's and maybe the Daytona's - but the R35 is right up there for sure.

Buggered if I know how to embed a video so here's a quick link to Tony's car in action -

Not sure if this was on the same set of tyres he used for TWP but if so it is even more impressive given that will be 3 tarmac rallies he's done on the one set of rubber.

Marlin Grand Master

Marlin

Posted
Posted
Good to see a Skyline get up there and win for Nissan.

But i hope this isnt taken as a negative thought or in anyway taking away from their achievement but this could almost mark the day that Skynet starts to dominate rallying...

I can't see how any of that could be taken as negative Roy?

I don't have an issue if a particul car tends to dominate rallying as such, and I believe that just about any front running car can have its day, given conditions that suit it and a crew that is prepared to push really hard, and possibly bin it

I was watching the times all weekend, and have no doubt that both Jim and Tony were both pushing very very hard, and also that the conditions really suited their particualr cars.

Remember that this was a short event, with no limit on tyre changes (did Tony Quinn even change one? :laugh:) and it was also dry. For those two guys to have such a big gap on Vandenbergs and Longhurst (3rd and 4th) is a real feat!

Evil34 Experienced

Evil34

Posted
Posted

Congratulations to Tony and Naomi (my future sister in law) for winning this event and i hoe to see alot more wins from them this year yet as they have alot more races coming up this year.

It is great to see the GTR really starting to show its true colours and Tony is still learning the car so hopefully better things are still yet to come.

Wogboy Mentor

Wogboy

Posted
  • Author
Posted
Hi mate. Yes, Russ will be there in the Hi Octane gtr.... I was going to nav for him but have decided to drive my own car.

35's should be thick on the ground! :laugh:

Look forward to catching up with both of you when you come through Burnie!

Kel Veteran

Kel

Posted
Posted
Remember that this was a short event, with no limit on tyre changes (did Tony Quinn even change one? :)) and it was also dry.

There was definitely a tyre changed involved - Quinn's fronts were worse than shagged on Saturday night!

It was brilliant to see Tony and Naomi take the win - Jimmy was a man on a mission this weekend and they had to fight for every second they got up on him and Barry.

We pulled up next to Tony after the last stage to offer what we hoped were to be their first lot of congratulations- even then he wasn't sure he'd done enough to keep Jim from first - it was just that close.

The 35 is absolutely going to dominate tarmac rallying once the tyres get properly sorted.

LSX-438 Mentor

LSX-438

Posted
Posted
There was definitely a tyre changed involved - Quinn's fronts were worse than shagged on Saturday night!

It was brilliant to see Tony and Naomi take the win - Jimmy was a man on a mission this weekend and they had to fight for every second they got up on him and Barry.

We pulled up next to Tony after the last stage to offer what we hoped were to be their first lot of congratulations- even then he wasn't sure he'd done enough to keep Jim from first - it was just that close.

The 35 is absolutely going to dominate tarmac rallying once the tyres get properly sorted.

Awesome results!

And what of the tyres, is there anything on the radar?

sewid Grand Master

sewid

Posted
Posted
There was definitely a tyre changed involved - Quinn's fronts were worse than shagged on Saturday night!

It was brilliant to see Tony and Naomi take the win - Jimmy was a man on a mission this weekend and they had to fight for every second they got up on him and Barry.

We pulled up next to Tony after the last stage to offer what we hoped were to be their first lot of congratulations- even then he wasn't sure he'd done enough to keep Jim from first - it was just that close.

The 35 is absolutely going to dominate tarmac rallying once the tyres get properly sorted.

Yeah, was running Dunlops day 1 and Bridgestones the rest? Judging from the photos ...

Bloody awesome work on the Bridgestones.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      If there's enough meat in the housing where you want to put the M12 adapter, then do it, but be aware that if/when you f**k that up you'll probably be repairing it before doing anything else. I'd just drill it out and tap ina 1/4" thread. No need for rocket surgery when the next most obvious thing will do. You could throw a 1/4 x 1/8 bush in there and use the same fitting you intended to use.
    • GTSBoy
      RB26DETT Sketchy boost mod?

      By GTSBoy · Posted

      Not this But this  
    • Murray_Calavera
      What should I do next to hold the head on

      By Murray_Calavera · Posted

      Is the only issue that the oil catch can is getting filled on hard runs? I'd be thinking more about oil control issues rather then the head lifting, especially as you aren't seeing spiking in the coolant pressure.  Do you need restrictors in the head, or better drains from the head? Does the sump need venting to the catch can?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      Tried to make 1/8npt threads into compressor house of the turbo for my EBC. Threads got fu#ked and ended up with and elongated hole, so I do have good amount and nice threads 90% of the hole but 10% I only had 1-2threads there and rest of it is flush on that side of the hole.. So my idea is to do M12 x 1.25 to AN4 with braided lines instead of 1/8npt to 4mm vacuum silicone hose.  and hopefully get a better thread. M12 is quite big and AN4 is a little bit bigger than 4mm (4.9mm inner diameter braided PTFE hose). but this should work. Thoughts? Otherwise I will weld and adapter onto the turbo.   
    • Duncan
      C34 RSFour V Build in the US

      By Duncan · Posted

      Looks great, I hope everything is working well after all that time!
×
×
  • Create New...