Jump to content
SAU Community

Recommended Posts

  • Replies 2k
  • Created
  • Last Reply

Top Posters In This Topic

Boj - cheers :D looks mean, they did a good job i reckon. The cooler has 2" turbo side since that stock pipe off the turbo and up alongside the engine to that stock bracket is 2", so they went from there 2" then flares out to 3" just near headlight to go into the 3" inlet on the cooler. Then 3" all the way on intake side. haha yeah the coke bottle overflow was fitted by the previous owner wen he took it down to the Kwinana Motorplex to do the 1/4 mile, they made him put something there so he skulled his coke and chucked that in there hahah. it was registered without one altogether!

To make the cooler fit they needed to remove the air con condensor from the front coz its right in the way, if i want that back i need it rerouted elsewhere .. and they had to cut a loop about 1/2 the size of the pipe on the Inlet side in the metal under the headlight, and a small bit on the turbo side same place.

Also, and this refers to RSX84's question, with the bottom lip, to get the cooler to sit there they removed that whole metal support bracket thing that is in the bottom for the lip, which has like 10 bolts along it! coz it was right where the cooler and it's brackets needed to go (cooler has 2 brackets underneath and 2 up top). so they simply replaced the end bolts for the lip and put a bunch of zipties along underneath to hold the centre. not the neatest but does the job and is sturdy enough. all the main bumper support etc is there and uncut so thats the main thing!

however, u can probably see on the LHS pic the 3" inlet pipe is actualy squashing my radiator hose abit and sitting right up against it meaning the cooler pipe gets really hot :D so ive got to get my radiator out and get that elbow joint cut straight and flared out and a new peice of radiator hose that just goes straight across much simpler. costing me $72 for the cooler modifications, and a full clean and flush of the radiator & new fluid while its out.

but thennn itll be perfect hhaaha

cept shit it wouldnt mind them wheels in real life! looks mint! haha i might have to put my microtech install of a month or 2 and get another pair of 17s for the front ;D lol bling bling

Question - Is this the easiest way to replace my gearbox oil???

Place car on hoist, undo drain plug and drain all old oil. Put drain plug back in. Take out side plug, as to know when gearbox is full (oil will slowly come out that side whole when the box is full). Then either use a drill pump to replace oil through side plug on gearbox or take out gear shifter and fill box through that.

ive had little success through the shifter hole.

castrol gear oil comes in a squeeze bottle about 1 litre in size and has like a nozzle on the end, that works ok.. other than that i use a tube going into the side filler hole, hang the tube from higher height and stick a funnel in the other end of the tube and use the laws of gravity to do the work for me.

']Boj - cheers :P looks mean, they did a good job i reckon. The cooler has 2" turbo side since that stock pipe off the turbo and up alongside the engine to that stock bracket is 2", so they went from there 2" then flares out to 3" just near headlight to go into the 3" inlet on the cooler. Then 3" all the way on intake side. haha yeah the coke bottle overflow was fitted by the previous owner wen he took it down to the Kwinana Motorplex to do the 1/4 mile, they made him put something there so he skulled his coke and chucked that in there hahah. it was registered without one altogether!  

To make the cooler fit they needed to remove the air con condensor from the front coz its right in the way, if i want that back i need it rerouted elsewhere .. and they had to cut a loop about 1/2 the size of the pipe on the Inlet side in the metal under the headlight, and a small bit on the turbo side same place.  

Also, and this refers to RSX84's question, with the bottom lip, to get the cooler to sit there they removed that whole metal support bracket thing that is in the bottom for the lip, which has like 10 bolts along it! coz it was right where the cooler and it's brackets needed to go (cooler has 2 brackets underneath and 2 up top). so they simply replaced the end bolts for the lip and put a bunch of zipties along underneath to hold the centre. not the neatest but does the job and is sturdy enough. all the main bumper support etc is there and uncut so thats the main thing!

however, u can probably see on the LHS pic the 3" inlet pipe is actualy squashing my radiator hose abit and sitting right up against it meaning the cooler pipe gets really hot :P so ive got to get my radiator out and get that elbow joint cut straight and flared out and a new peice of radiator hose that just goes straight across much simpler. costing me $72 for the cooler modifications, and a full clean and flush of the radiator & new fluid while its out.

but thennn itll be perfect hhaaha

cept shit it wouldnt mind them wheels in real life! looks mint! haha i might have to put my microtech install of a month or 2 and get another pair of 17s for the front ;D lol bling bling

towords the radiator hose have you throught about rapping the hose in that heat wrap stuff to keep the heat in the hose?? what you'd need would cost maybe $30 from autobarn with some left over for somethine else?

i had to take about an inch off my lip and then put that surport bar across the cut to stop the edge from splitting.

fronts fit and rears i swapped the tops :)

i guess thier not adj camber tops with yours then?? thats what i was getting at as ghostrider was saying that to fit them to the r30 the front tops have to be revericed to fit the r30 towers which then means you get +chamber rather than - :D

Question - Is this the easiest way to replace my gearbox oil???

Place car on hoist, undo drain plug and drain all old oil.  Put drain plug back in. Take out side plug, as to know when gearbox is full (oil will slowly come out that side whole when the box is full).  Then either use a drill pump to replace oil through side plug on gearbox or take out gear shifter and fill box through that.

Just to be on the safe side,crack the "filler" plug before undoing the drain plug.Just in case it's really tight,or nearly rounded off,etc.If you drain all the oil out,and for some reason can't get the filler one out,you're in trouble!! :)

I assume you'd be doing this at your work? You guys should have a hand pump thing.Looks sort of like a greese gun,but you pull handle out to suck up oil from a container,then pump it into the g/box.Kind of like a yabbie pump ;) but yeah,a drill pump would be even better if you have one!

A bit off topic,but you haven't had any more BBS center caps come in have you? I'm still after one for mine! :D

Guys, I have a dumped DR30 white with an RB20DET. It has a Link computer and WAW zenner wheels 16" with 225/50 tyres. It has a big selby sway bar on the front and the lower control arms extended by 7/8" as told to do by datsun performance centre. Handles like a champ.

I have 2 probs though and I'll ask for help in the other sections.

Great to see some others that share the ecstacy of the DR30.

Guys, I have a dumped DR30 white with an RB20DET.  It has a Link computer and WAW zenner wheels 16" with 225/50 tyres.  It has a big selby sway bar on the front and the lower control arms extended by 7/8" as told to do by datsun performance centre.  Handles like a champ.

I have 2 probs though and I'll ask for help in the other sections.

Great to see some others that share the ecstacy of the DR30.

Sounds nice.Throw some pics up if you have any! :D

But I have to say,what's with all these RB's in DR30s????? :confused:

DR30RS The reason of putting an RB into the car is very very obvious! It was already in the car!!!! I wouldn't have cared if it had the L20T in it. Other than the dud directional stability they are just awesome. I would probably rather the FJ20 because it has the simple computer that I know how to work it.

But I do enjoy the estimated ~250 horses from the RB and the 8L/100km that it does on the freeway.

I'll put some pics up soon

DR30RS The reason of putting an RB into the car is very very obvious! It was already in the car!!!!  I wouldn't have cared if it had the L20T in it.   Other than the dud directional stability they are just awesome.  I would probably rather the FJ20 because it has the simple computer that I know how to work it.  

But I do enjoy the estimated ~250 horses from the RB and the 8L/100km that it does on the freeway.

I'll put some pics up soon

250?? Is that all????? :jk:

And yes i have to ask the question what is with RB20's in all these dr's??? Not good!!

DR30RS : whats the boost response like on your turbo?? Your running GT30 arnt you?????

the FJ computer is crap tho ! i want rid of it ASAP and so does everyone else! haha

im glad im stil FJ powered gota keep the originals going!

my car got ~220 rwhp getin it dynoed thurs, but yeh its reasonabley powerful, and as far as fuel economy goes its pretty bloody good despite running very rich. im not too sure of the exact economy i dont ever work it out, but i once did about 250km in a day when wearing in my clutch (thus not revving it much either so say 3.5-4k rpm max) and i used about 1/3.5 of a tank. 1 tank is 50l or so, so 1/3.5 is ~17l say, and 250/17 = 14.7, so if i take it easy thats some sweet economy.

but then if i plant it, and rev to ~6300rpm 2nd 3rd and rev 4th to say 4.5k (run outa road n shit around then :cheers:) i can almost watch my fuel gauge needle go down 1mm! i think the Malpassi regulator does that shoving fuel in =) all good, Jap-rich style billowing black smoke top end haha rather that than lean :)

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...