Jump to content
SAU Community

Recommended Posts

ok so i finally got my car back today and decided to try this e85 everyone's talking about....

i went on a mission to hoppers crossing united and picked up 40lt for the bargain price of $39.90!!!

DSC00068.jpg

DSC00069-1.jpg

i then went on my road trip to my tuner, Rob @ CREATD....

car : 94 r33 gtst with an UNOPENED rb25.

turbo : HKS 2835 pro s (.68)

fuel system : nismo 555cc injectors, nismo pump

management : power fc

we first did a pulp run for comparison's sake and got 270rwkw...

then we dumped the tank and poured in the jingle juice... the first thing you notice is the smell... its sweet... real sweet...

turned the key and when the e85 filtered through the idle was pretty horrible, but livable, the afr's were off... but we gave it a pull just to see the diff off the bat without any fiddling... 278rwkw... not bad...

after a few more pulls and some extra fuel + timing we ended up with 311rwkw! :PBJ:

below is a comparison graph with pulp (green) and e85 (red)

DSC00077.jpg

DSC00070.jpg

the tune is now nice and tidy, and the car starts, idle's and runs like a dream.

the 311 rwkw is insane with full boost by 3500

traction is now non-existant (with 5/7 greddy coils, positive camber, sways etc)

so after day 1 of e85, i am a VERY VERY happy camper! i even went back and filled the car up and grabbed another 40 lt in the jerry's...

gonna run it for a full week as a test and make my descisions then... but so far, DAMN good!

below is a link to the vid of the 311 run:

311 rwkw dyno pull

:ermm:

BIG thanx once again to Rob @ CREATD for yet another bang up tune!!!

Link to comment
https://www.sau.com.au/forums/topic/258776-joeyjoejoes-e85-tuning-adventutres/
Share on other sites

  • Replies 489
  • Created
  • Last Reply

Top Posters In This Topic

so after day 1 of e85, i am a VERY VERY happy camper! i even went back and filled the car up and grabbed another 40 lt in the jerry's...

gonna run it for a full week as a test and make my descisions then... but so far, DAMN good!

I don't wanna rain on your parade but if you go for a run and need to fuel up with ULP, won't the car run like shit because of the different fuel?

The e85 sounds good and looks like a winner.

It's not like it'll happen everyday but keeping the boot full of jerrys for an extended run is what you'll have to keep in mind.

We don't have it over here yet but I'll be keeping an eye out for it.

Nice work Mr Shabadoo, have you tried the current tune running normal 100ron just incase you get stuck with no e85 available?

Will it ping it's ass off and be a limp home prospect or still be safe under normal driving?

Ye its good fuel no doubt - Matt who is tuning EVO after EVO at the moment is seeing crazy gains. :ermm:

Only issue's i have - its not widespread enough here in Vic yet really... and the price isn't really reflective in terms of economy.

Economy is worse than good pump... depends on the use of the car :)

Ye its good fuel no doubt - Matt who is tuning EVO after EVO at the moment is seeing crazy gains. :)

Only issue's i have - its not widespread enough here in Vic yet really... and the price isn't really reflective in terms of economy.

Economy is worse than good pump... depends on the use of the car :P

yeah, so far the consumption is alright... ill post more details in a week (i ripped through nearly 40lt today :ermm: )

yeah, i recon i could get 320 with the cam gear, but i decided not to push it anymore :ermm: (+ i want the response)

it took probably 2 hours tuning.... (we chat a lot, we really only did like 10 pulls)

Good results, but am i reading right that you are now running more boost?

yeah, its on 18psi for the e85, and 16 for the pulp, as the pulp tune wasn't gaining any more at that pressure

yeah, its on 18psi for the e85, and 16 for the pulp, as the pulp tune wasn't gaining any more at that pressure

Awesome results man, and thanks for sharing - really good to see an overlay between normal pump and E85 on the same car :ermm:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I can ship Nismo floor mats to you: https://www.oemsoko.co.jp/products/nismo-floor-mats-for-skyline-r33-bcnr33-stagea-wgnc34?_pos=1&_sid=9278c1467&_ss=r  
    • Here's the link: https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6642/misc/G49?frame_no=WGNC34-137122 What you think about it? The same product i found on nengun: https://www.nengun.com/oem/parts/40567/MiPwn5qAMfCfmpxHNDnwn5q9MDAx8J-QiW9sZC1qcC0xMTAtRzQ5LS0wMDE/Floor+Carpet+%2F+Mat+2/0688339eba149c19 Bot i have spoken to 😅 ensured me, that mats are 100% original, oem product. I have my doubts. I also heard what you mentioned, that nengun often offers items that are actual not available... On the other hand mats i found on japanese yahoo or ebay are in poor condition and still quite expensive so i'd rather wait for some better offers. My location - Poland. We literaly don't have ANY market for used Stagea parts so need to search outside Europe.
    • You can’t see much on the other side as the lcd is there I don’t think it’s the same as the m33 beside it as the markings on top is not the same was hoping someone had a good quality photo or if they just happened to have the unit in hand, quickly take the cover off and take a photo to clearly show the marking on top to identify the diode   the unit is currently with an electronics repair shop so I can’t take another photo at the moment hopefully they are smart enough to know if it’s a zener diode or not
    • I'd be very surprised if you can buy new OEM mats. But if you can, I want some too!  Do you have links to the variations you found? Also, where are you located? I found that Nengun is happy to list items to purchase but when you do buy them you'll get an email that it's actually discontinued. As far as I know the variations in floor mats are different colour schemes as well as automatic and manual having a slightly different shape. The automatic ones fit into a manual car without issues, but I think you'd have trouble fitting the other way around. I have photos that show the shape difference if you care. FWIW I bought sets of used floor mats in decent condition at yahoo auctions.
    • Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
×
×
  • Create New...