Jump to content
SAU Community

Recommended Posts

^^ if a tank is completely sealed how can 98 go off?

tanks aren't sealed, they have a breather on them which goes to your charcoal canister. 98 goes off because the volatile chemicals evaporate, ethanol is 85% high octane stuff so if you lose some ethanol to evaporation all that happens is you have a bit less fuel than when you started. petrol is low octane base with some high octane additions and if these evaporate then you are left with shit fuel.

the main danger with ethanol is when it absorbs moisture, it will form two different layers in the tank with the water concentrated in one of the layers and this is obviously bad for your motor. it's a much bigger problem in boats because it's easier to get water contamination, in a car it's not so bad but something to be aware of if you let the car sit for long periods of time (especially outside - in a garage it would be fine).

When you say breather, it is a vac line so the tank has constant neg pressure. I can only go by my own previous experience and say if you leave 98 in a sealed container it will turn to crap over a few months, I will know with ethanol after next weeks experiment...

I don't see moisture as an issue in the amounts we are talking about, better that it mixes than sit in the bottom of the tank.

  • Replies 489
  • Created
  • Last Reply

Top Posters In This Topic

It seems to be a popular misconception due to the problems with methanol storage and acidity.

you mean due to rumors circulated by oil companies... ;)

tanks aren't sealed, they have a breather on them which goes to your charcoal canister.

yeeeeees... into my "charcoal canister" which i totally never removed... >_<

Ive had my car sit in the garage for just over 3 months with a full tank of E85. Had no dramas when i drove it again.

i've used some e85 that i had sitting in a 20l sunoco tin in the garage on a milkcrate for over 6 months and it was fine :D

quite a good, comprehensive article

http://theage.drive.com.au/motor-news/is-s...0806-11mog.html

Manildra alone is already sitting on a lake of 100 million litres of fuel-grade ethanol, just waiting for buyers.

>_<:D;)

wonder if these are cheaply available and easy to install/hook-up

There's even a piece of equipment mounted in the fuel tank — very similar to a police breathalyser unit — that can detect how much ethanol is in the fuel and retune the engine's electronics to suit the mix
wonder if these are cheaply available and easy to install/hook-up

Yep the sensors most certainly are. The only problem is you basically need a motec to take advantage of them, basically you need two maps, one with petrol one with e85 and then you need to interpolate between the two using the sensor. Ultimately you would create 4 or so maps in case its not a linear relationship between the two fuels and have the ecu interpolate between them all. Not really that cheap to set up, but very effective when done, almost all new cars from the factory are capable of doing this.

Edited by Rolls

the pricks didn't post my second comment

"To Barry Park: Can I convert my existing Commodore to run on E85?

No"

This is incorrect. Most commodores getting around these days can be converted, and if you got this info to the contrary from Holden, they're basically lying.

They posted my first comment in a matter of minutes, but the above has gone MIA - Barry Park is the author.

EDIT: tried again, still won't post it the pricks.

Yep the sensors most certainly are. The only problem is you basically need a motec to take advantage of them, basically you need two maps, one with petrol one with e85 and then you need to interpolate between the two using the sensor. Ultimately you would create 4 or so maps in case its not a linear relationship between the two fuels and have the ecu interpolate between them all. Not really that cheap to set up, but very effective when done, almost all new cars from the factory are capable of doing this.

motec = $ = problem :)

the link/vipec computers can use the Siemens E85 ethanol content sensor, trent might be interested to have a play around with one and see how it works?

Yeah any computer that allows a 3rd dimension to the fuel/ignition maps will be capable of doing it. As currently most fuel/ignition maps are controlled via rpm and airflow. They have trim maps based on TPS etc sometimes but to use an alcohol fuel ratio sensor you need to modify fuel and ignition, and its not linear, need a complete map.

This could be an awesome excuse for me to get a vipec

cycly idle wank FTW!!!

I'm doing another formal drop off at the end of this year and im thinking the cycle idle on the Vipec going into my car will come in handy :P

But yeah the Vipec being able to adjust the map with the sensor in the tank for the E85 sounds like a great plan!

Edited by PM-R33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...