Jump to content
SAU Community

Recommended Posts

hey guys,

2 weeks ago i did an oil change on my car, and as i usually do, i bought 2x 4Ltr Bottles because i like putting 5 Ltrs in to the car.

But unconciosly ive poured all 8 Ltrs into the car and thought nothing of it.

So a few days ago my cars started to smoke a little and only then did i realise what i had done.

So obviously ive gotton rid of about 3-4 Ltrs from the car but the car is still burning some off and smoking.

So im guessing theres still oil in the system and was wondering which other way can i get rid of all the excess oil? without waiting for the car car to burn it, Which wouldnt be a good idea anyways..................

any help would be appreciated

Link to comment
https://www.sau.com.au/forums/topic/259981-too-much-oil/
Share on other sites

O.o rb20 takes( my car) 4.-4.4l but YOU shouldnt over fill ur oil. on the dipstick 3/4 to max at 8o degree's( operational temp) is the measurement to much and to low can cause issues

Hi.

Perhaps you should remove the sump plug and let some oil drain out until you have the right level.

Link to comment
https://www.sau.com.au/forums/topic/259981-too-much-oil/#findComment-4463449
Share on other sites

did you remove any oil before you put the 8L in? just checking

All you can do is wait for it to (hopefully) burn away. don't be suprised if it runs like a pig for a few hundred k's either.

If you want another crack, empty all the oil out the sump and put 5L back in the top

Link to comment
https://www.sau.com.au/forums/topic/259981-too-much-oil/#findComment-4464006
Share on other sites

nice job. sorry it's off topic but this may make you feel a little better. Back when i worked in a servo some twit bought a 5 litre oil bottle and poured the BLOODY LOT into the petrol tank of daddy's brand new hsv clubsport. he came back in a cloud of smoke complaining of a dodgy batch of oil i had sold him and when i checked the security tapes i pissed myself. bet daddy didn't. and yet he had 4 mates in the car with him and no one uttered a word.

Link to comment
https://www.sau.com.au/forums/topic/259981-too-much-oil/#findComment-4464242
Share on other sites

i finally made some time to visit the mechanic, so the car will be taken tomorow to be checked out,

it only smokes on idle, when i stop at lights etc. so im hoping its minor.............

wll see how it goes

Link to comment
https://www.sau.com.au/forums/topic/259981-too-much-oil/#findComment-4469576
Share on other sites

nice job. sorry it's off topic but this may make you feel a little better. Back when i worked in a servo some twit bought a 5 litre oil bottle and poured the BLOODY LOT into the petrol tank of daddy's brand new hsv clubsport. he came back in a cloud of smoke complaining of a dodgy batch of oil i had sold him and when i checked the security tapes i pissed myself. bet daddy didn't. and yet he had 4 mates in the car with him and no one uttered a word.

Wait.

What? :(

Link to comment
https://www.sau.com.au/forums/topic/259981-too-much-oil/#findComment-4469690
Share on other sites

nice job. sorry it's off topic but this may make you feel a little better. Back when i worked in a servo some twit bought a 5 litre oil bottle and poured the BLOODY LOT into the petrol tank of daddy's brand new hsv clubsport. he came back in a cloud of smoke complaining of a dodgy batch of oil i had sold him and when i checked the security tapes i pissed myself. bet daddy didn't. and yet he had 4 mates in the car with him and no one uttered a word.

lol

633317514784490542.jpg

Link to comment
https://www.sau.com.au/forums/topic/259981-too-much-oil/#findComment-4470238
Share on other sites

the rb25 sump CAN NOT take 8Ltr's "ParagOn"

if u wer to fill it more than 4.4Ltrs of oil..

it(oil) would start to go up to ur through to fill up ur engine..

depending on how much oil u put in.....

as in his case.. 8ltrs...lol

Link to comment
https://www.sau.com.au/forums/topic/259981-too-much-oil/#findComment-4470552
Share on other sites

^^ Yeah cause overfilling the oil means it will go into the combustion chamber...you know less than he does you fool.

Seriously, you needa be more careful from now on dude, or just have someone who knows what theyre doing work on your car instead.

Link to comment
https://www.sau.com.au/forums/topic/259981-too-much-oil/#findComment-4470607
Share on other sites

I'd be more worried about spinning a bearing because of the air bubbles the crank is causing when hitting the oil. chances are you've messed up the crancase pressure and oil is coming out of your turbo seal, PCV or even your beathers.

drop the oil but wait a while for the oil to run down the walls of the block, crank and rods, you could re-use the oil you put in there just make sure you dont contaminate it.

Link to comment
https://www.sau.com.au/forums/topic/259981-too-much-oil/#findComment-4471132
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...