Jump to content
SAU Community

Recommended Posts

But then it would be boring..? :O

Sif, im sure a 220kw R33 is a pretty fun car.

Put it this way, it leaves a lot to be 'driven' rather than to be 'feared'.

how much to highflow a s15 turbo and what could be expected out of it? i did a read but would like to hear first hand and yes its for a sr

Can high flow that to some thing similar to a 2860 or 71 with good response and drivability. Can also high flow them in to G3 specifications which one member in NS made 290rwkws on pump 98 with, how ever its bit laggy for a SR20det.

Bit update on turbine designs, I'm working on another model based on .82 G3s by keeping combustion circulating longer inside the turbine housing before final exist, hopefully speeding up turbine wheel at higher rpm without increasing combustion pressure. If every thing works according to plan this method would deliver even better ending result then the current fnt setup.

Tsk tsk...you really should know better dave...looks like i gave you too much credit.....

trying to see your point but i'm guessing you don't have one :).

I think Ron may have gotten confused, because Birds said he was getting a SS1PU but then later he said hows my high flow going :D

I was slightly confused too

If I'm correct in my guessing, I'm getting the internals of an ATR43 SS1PU put into the standard turbo...so it will have the standard comp housing bored out to suit and look factory, but the aftermarket rear housing with FNT.

If I'm correct in my guessing, I'm getting the internals of an ATR43 SS1PU put into the standard turbo...so it will have the standard comp housing bored out to suit and look factory, but the aftermarket rear housing with FNT.

So will this make bit less power than ss1PU but with bit better response?

Can high flow that to some thing similar to a 2860 or 71 with good response and drivability. Can also high flow them in to G3 specifications which one member in NS made 290rwkws on pump 98 with, how ever its bit laggy for a SR20det.

Bit update on turbine designs, I'm working on another model based on .82 G3s by keeping combustion circulating longer inside the turbine housing before final exist, hopefully speeding up turbine wheel at higher rpm without increasing combustion pressure. If every thing works according to plan this method would deliver even better ending result then the current fnt setup.

What Is the spool point 4200 for 290 I would be happy with 4500 kinda have to expect that type of thing

So will this make bit less power than ss1PU but with bit better response?

Should be much the same, maybe a little less...I don't think the ATR43 comp housing is much bigger than the standard comp housing, if at all. I just wanted a more factory look so got Stao to high flow the factory comp. The rear housing is the same as the ATR43 so this is why it should produce similar results.

Apparently my turbo is now ready so I'll pick it up, install next weekend and get it tuned soon after.

OK, dont get confused..... Stao can highflow your turbo, its called a highflow...

Stao also does what he calls a PU highflow, which is pretty much the same as your regular highflow but stao puts a bigger rear housing on it.

The rear housing is similar to whats on the G3... But it will retain your stock front compressor housing. I believe it comfortably maxed out at 290 or so.

Ahh how nice it would be to start back at a stock skyline.. Simple highflow, cooler, zaust, tune. How nice it would be :rolleyes:

Whats the difference between the PU hi-flow and the G3?, i actually thought they where exactly the same except the the G3 comp cover is a big GT30-35 .70 one instead of standard.

But then i don't actually know and have never asked..lol

cheers

darren

Can someone correct/ clarify me:

Hypergear equivalent or closest match to:

Kando T67 = G3?

GT3076R = Kando TD06SL2 20G(10cm) = SS2 or G3?

GT3071R = SS1PU

R34 Hiflow / GCG hiflow = SS1

Can someone correct/ clarify me:

Hypergear equivalent or closest match to:

Kando T67 = G3?

GT3076R = Kando TD06SL2 20G(10cm) = SS2 or G3?

GT3071R = SS1PU

R34 Hiflow / GCG hiflow = SS1

Very gross comparisons.. I dont even want to do this but here goes:

T67 = 35R (will be similar in power on the average setup, on a well built setup you can expect more power from the 35r but more response from t67)

3076 = G3 (G3 will be laggier)

3071 = G2 (3071 may make more power)

2835 = SL2-20g/SS1PU (2835 should be laggier, final output about the same)

GCG/GTRS = SS1 (the staple 240kw products)

Please pick something now and but it lol

Very gross comparisons.. I dont even want to do this but here goes:

T67 = 35R (will be similar in power on the average setup, on a well built setup you can expect more power from the 35r but more response from t67)

3076 = G3 (G3 will be laggier)

3071 = G2 (3071 may make more power)

2835 = SL2-20g/SS1PU (2835 should be laggier, final output about the same)

GCG/GTRS = SS1 (the staple 240kw products)

Please pick something now and but it lol

Thanks man, interesting how they compare, where would you put the ss2 btw??

I would put the SS2 with the 3076. Both turbo's capable of 300rwkw, with the SS2 coming to full boost by about 3500, tad earlier than the 3076. I would have compared the G3 more to the GT35 turbo, it has potential of about 350rwkw and it won't make full power until about 4krpm...

The GT35 on an Rb25 motor is capable of about 450hp to 500hp. The G3 sits around there 450hp and with a bigger motor a little more. Its not a direct line but I certainly would not compare it to a 3076.

I would put the SS2 with the 3076. Both turbo's capable of 300rwkw, with the SS2 coming to full boost by about 3500, tad earlier than the 3076. I would have compared the G3 more to the GT35 turbo, it has potential of about 350rwkw and it won't make full power until about 4krpm...

Thats what I thought, as per my original post, ie-

ss2 = GT3076

T67 = G3

I would put the SS2 with the 3076. Both turbo's capable of 300rwkw, with the SS2 coming to full boost by about 3500, tad earlier than the 3076. I would have compared the G3 more to the GT35 turbo, it has potential of about 350rwkw and it won't make full power until about 4krpm...

Hey Sarge did u get your missing kilowatts after you fixed your intake pipe?? How much power u at now?

any reviews on the 50mm hyper-gear gates you sell?

The Silvia you see on youtube has one fitted and running for the past 5 years. I occationally uses them on the test car, works fine. Internal wise I've machined them to run on dual springs fully adjustable.

Size wise G3 is one trim larger then a 3076 with 2mms bigger in comp inducer and turbine exducer. I think might also be an slightly bigger turbo then a T67.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...