Jump to content
SAU Community

Recommended Posts

Just realized they said there was boost control issues so I guess that would be affecting power up top a fair bit as well.

If it was holding boost to redline I still think itd be 250+

I wouldn't expect it to be hitting 270kw on 20 psi with a 15+ yr old motor.

Edited by Mitcho_7

Wait for the charts gentlemen, no point speculating over power figures or what's responsible for them until we see what the engine is doing. As JEZ said, there's probably a bit more in the turbo if they take the time to sort out boost etc. but for now Kasko should be pretty happy and he looks to be.

Very smooth. Boost tapering off = another 10-20 if you can get it to hold without the engine pinging?

Full boost looks like high 3000's / 4000rpm, I'm guessing.

  • Like 1

Need ebc to hold boost up top. I'm testing a little mod this weekend and hopefully that changes the boost behavior up to.

Already got a profec b spec 2 installed in it

This didnt help with the tapper.

Seems the actuators are not up to holding the 20psi consistently

Also as DVS said it seems my clutch is either on its way out or needs a bit of adjusting/bleeding

The car feels phenomenal when it comes onto boost and spins 2nd without hesitation cruising.

Next step is a CAI and a box for the pod filter might help a little.

We did back to back power runs on a safer tune and only lost around 1-2kw

Is that same turbo you have birds?

Yeah man.

when it comes onto boost and spins 2nd without hesitation cruising.

How bout that! :)

What size tyres you running?

Very smooth. Boost tapering off = another 10-20 if you can get it to hold without the engine pinging?

Full boost looks like high 3000's / 4000rpm, I'm guessing.

Assuming it's 4.11 diff ratio and normalish sized tyres is nearly at full boost at 4000rpm with 180rwkw

Not exactly comparable with a GT-RS

Assuming it's 4.11 diff ratio and normalish sized tyres is nearly at full boost at 4000rpm with 180rwkw

Not exactly comparable with a GT-RS

180rwkw @ 4000rpm IS comparable to a GTRS, I agree.

Forget about where it hits full boost etc etc. The power @ RPM will tell you what its doing flow wise, which is what counts.

180rwkw @ 4000rpm IS comparable to a GTRS, I agree.

Forget about where it hits full boost etc etc. The power @ RPM will tell you what its doing flow wise, which is what counts.

Every decent turbo makes 180-200rwkw at 4000rpm on a RB25... It can be a T67, 3071, 3076 or HKS 2835pros, they all do it

It's what happens before and after then that makes the turbos different!

Edited by SimonR32

Every decent turbo makes 180-200rwkw at 4000rpm on a RB25... It can be a T67, 3071, 3076 or HKS 2835pros, they all do it

It's what happens before and after then that makes the turbos different!

areyounotentertained.jpg

Yeah, so doesnt a GTRS do roughly 180-200 @4000 and end up around 250 by 7000? LOL

So its more or less hitting GTRS benchmarks, OK glad we agree. :whistling:

If the turbo can hold boost for the upper RPM, there's no reason it can't make 260-270 IMO, so no it's not comparable to a GTRS...it's slightly better :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
    • Did you even watch the video? Its not a steering wheel. 
×
×
  • Create New...