Jump to content
SAU Community

Recommended Posts

derrrr a few pages back lol nvm... I notice the internal gate is still there??

I really liked the way how the KKRs560 had the center divider grinded out for the internal gate to work. But either way that is not a "real" twin pulse housing. The pulse in the center must have the exact clearance to the turbine wheel as the rest of the turbine housing profile does (20 thou), with the pulse separated from the manifold all times. Realistically it needs two external gates and gets treated as "twin" turbos.

I seen one ( I think it was a Toyota turbo) which got 2x wastegaes in the turbine housing as in one per pulse. It will has to be setup that way for the to work. To get that working the pulse will need to be twisted so it actually faces the dump pipe area, Will need a new casting and etc to get that working. But nothing is impossible.

FINALLY got my car back on the road after about 4 months of no rego due to defect lololol

So good to feel the pull of a G3 again, right now I can't even fathom how it would feel with an updated version or even SS2....

So good to feel the pull of a G3 again, right now I can't even fathom how it would feel with an updated version or even SS2....

Trade that old dinosaur in for some new technology!

Can't afford the upgrade and retune to be honest...since my 33 got defected for missing front numberplate (lol my fault...) it cost me roughly $2700 to get a roadworthy for it again (not to mention buying another car since it was my daily). I've spent enough on it for now, I'll just wait until I get used to and subsequently bored of this power again, then I'll see where I'm at.

Is that what it costs to clear a defect? man everything here in nsw is a total rip-off lol

lol what do you mean? My defect clearance included engineer's certificate for ALL modifications (~$1500) and fabrication+fitting of child restraint anchoranges (~$850)

lol what do you mean? My defect clearance included engineer's certificate for ALL modifications (~$1500) and fabrication+fitting of child restraint anchoranges (~$850)

That's the biggest load. Sif I'm ever going to be putting kids in my car. Even if I did, I'd take the trouble of getting the anchorages put in then. Why is a vehicle unroadworthy just because it can't carry kids seats? :/

Edited by Hanaldo

So that hole is ok to use? Have thought putting thd baby seat in the car might get some sympathy if I ever get pulled over.

Or they might think I'm being a bad parent putting a kid in a skyline :laugh:

I fail to understand how these cars got complied without getting anchor points fitted. My R32 has 3 of them, and there was no way it was going to pass the import/compliance/rego inspection at Regency without them. That was last century!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...