Jump to content
SAU Community

Recommended Posts

$800 including oil line. Depending on when can get it tuned, will be looking towards a weekish mark.

Also this high flow is made to aim 400rwkws mark, So it might not be very responsive.

Stao. Would you have a run of the new high flow against the ss1pu turbo i've got? Appears all the SS turbos runs the same compressor wheel, please share some light of the difference between the three.

SS1PU runs a turbine sized similarly to a GT28, GT28 spec rear housing and T04B front

SS2 runs a turbine sized similarly to a GT30, 5 bolt T3 rear and T04S front

SS2.5 Highflow runs a completely custom spec turbine (will leave details to Stao), stock 2IU housings

Some further updates. Since the majority of market is pushing for a cheap and cheaper option, I've managed to find and import some 21U copied turbine housings from China. Crazily machinery costs is only 1/30th of what my accumulation is in Australia.

So here it is, a Cheap turbocharger that produces decent power and response. The ATR43G3.5. Since 1/3 of the turbo and machinery work is done overseas. I can manage to squeeze the price down to only $850 including braided oil feeding line.

Dyno trailed today with very successful outcomes. It managed to archive 355rwkws, maxing out at 22psi. Far as pricing concern, this makes the lowest $/KW ratio turbocharger with added benefit of Rb2x bolton.

boost.jpg

power.jpg

It is pretty aggressive on road. expecting to see some where around the 320rwkws used as a internally gated turbo on pump 98. I've already mentioned the limit of stock exhaust manifold, so its up to the end user to sort out their own manifold and other supporting mods.

Stao, all you need to do now is take that turbo to the drags.

Get us a trap speed to verify the power and watch them fly out the door.

If the trap speed is indicative of the power I think you will be selling these faster than you can produce them.

Its using a 2IU exhaust housing rather than a .82 type A/B

The turbine wheel has been re-done to better match the tight 2IU housing.

It seems to have been developed to be 100% bolt-on ready and can be further developed down the track to have monster high mount potential.

The G3 and SS2 do produce noticeably strong mid to top range power with better transition response since they are built with a small turbine and the advantage of a reasonably large housing.

This turbocharger is good for a budget built. Like all other ATR, with very high external gate high mount potentials.

I will be working on the SL2 10cm based turbochargers next week. releasing 2 new models.

Hey all, after having a chat to Stao today I am tossing up between the SS2 or the new 3.5G

Has anyone got a dyno graph of SS2 on 98 internally gated on standard manifold?

Thanks

The SS2 for RB25det is only in T3 .82 FNT rear with RB's IWG assembly. The latest one is slightly more responsive:

http://www.skylinesaustralia.com/forums/topic/261613-hypergear-hiflow-service-continued/page-360

and required lot less duty on the ebc. So it will work better with factory manifold internally gated.

This is video track footage from John. Running a standard high flow from 2 years ago. It should be the last run of it as its getting a update to the latest SS2.5 profile.

car is currently on 260rwkws.

had a retune @ garage 101 the other day

as it stands it has

3" TBE

ATR43 with .63 trim - 4" inlet pipe and pod

hybrid inlet manifold and low mount exhaust manifold

850cc injectors

walbro

new clutch

think thats it

366whp @ 17psi

FYI

I am going to racewars (perth) and will be racing.

I guess ill be the first Hypergear Turbo to do a 1000 meter sprint?

Will be happening this weekend, hope to get as close to 300 as possible :):)

Will post my results up when im done :P

FYI

I am going to racewars (perth) and will be racing.

I guess ill be the first Hypergear Turbo to do a 1000 meter sprint?

Will be happening this weekend, hope to get as close to 300 as possible :):)

Will post my results up when im done :P

My guess is about 240-250kph.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...