Jump to content
SAU Community

Recommended Posts

I don't think that would be a problem. I can upgrade it to the latest profile, which is targeted at boost dropping issue with internal gate. PM if interested to go ahead.

If it hit a wall at 250 and pinged then I don't think holding 20psi through the whole rev range is going to really help anything. I'm going to keep searching and try find the issue

Unless a leaking PCV could be causing a boost leak and pushing oil out the failed cam covers ;)

Buy a new PCV to be sure, to be sure.

Unless a leaking PCV could be causing a boost leak and pushing oil out the failed cam covers ;)

Buy a new PCV to be sure, to be sure.

Ooh ooh anyone know the part number for the PCV hose on a 34? Completely off topic i know :P

Ooh ooh anyone know the part number for the PCV hose on a 34? Completely off topic i know :P

LOL What a lazy prick :P

Nissan 11810-AA500 - that's the valve. Dunno if you actually mean the HOSE.

LOL What a lazy prick :P

Nissan 11810-AA500 - that's the valve. Dunno if you actually mean the HOSE.

:laugh: yeah i know!

And YES i actually want the hose too!

lol that I cannot help with. I would have thought any old hose will do?

Useless :P

Maybe, i was just being lazy!

Cams are in. They are Tomei drop in 264 / 8.9mm lift. Now working with SS2 Alpha, Dyno tomorrow.

Driving them back from mechanics, the exhaust has a slightly different note. Haven't give to them yet, hopefully hitting 400rwkws+ while still making 20psi by 3500rpms.

cams.jpg

Don't know. I was at TAB having dinner with bunch of Oddies while the Mechanic doing his job. It was done at Springymotors south east of Melbourne.

Hate people whom junk yard shopping that buys 2nd hand junk that don't work, that is been cheap-skating on basic mods as injectors, afm and ecu, It puts Trents in to a mood and that held every one else whom's waiting to get their car tuned.

Unfortunately I'm one of the two person whom's asked to go home and come back next friday. Leaves me with some extra time building SS4 Alpha turbocharger.

Damn Stao, it's gotta be 3 hours back to your place in this traffic. Was a shame, I wanted to see what it could do.

Wasn't it you last week with the cheapskate injectors? :P

They are 650cc Bosch injectors and they are working properly. Its more due to the one ended fuel rail in the KIA. the other once cam out of them are Power enterprise 700ccs, way too big for idle on that car.

The VNT setup on the SS1PU is chocking the Rb25det down low, not sure if its ok for the SR20det as engine capacity is smaller. I'm reducing the compressor end down to 69mm from 74. which should match the turbine flow while picking up better response. My last tune for this month would be next friday and that will be the SS-4 VNT turbocharger. The new SS1PU will have to be trailed after Trent gets back from China.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...