Jump to content
SAU Community

Recommended Posts

Fill cylinder with fuel - cam tries to open valve - bent valve stem ........ would be the logic, however with enough fuel to do that, you would instead bend a rod first.

on the money!

and yet, I am order 2x new 1200cc grinded down, drilled out JECS injectors from Five O Motorsport (being a shit box R33 GTS-t I cannot justify a new plenum, top feeds, external reg etc..)

Well I fitted a brand new set of 1000cc to my mate's S15 and road tuned them for him.. works well enough, however just can't get them to idle at stoich. The best I could do was 14.2, but with electrical load the AFRs would drop to 12.5.

I understand they have rubbish control at min. pulsewidth however with E85 that problem "should" disappear as you require 30% more fuel to hit stoich.

Lesson learnt, don't buy used & high flowed/milled/shaven/drilled injectors.. new is ok.

Just out of interest could anyone give me a rough idea of the weight of an SS2? I bought one a while back and it's at the post office for pickup but I'm working. My step dad said he'd get it but he has a VERY bad back and I don't want to risk any damage.

He thinks it should be fine but I though I'd get an estimate first

Just out of interest could anyone give me a rough idea of the weight of an SS2? I bought one a while back and it's at the post office for pickup but I'm working. My step dad said he'd get it but he has a VERY bad back and I don't want to risk any damage.

He thinks it should be fine but I though I'd get an estimate first

  • 2 weeks later...

Been quite busy lately, posting up some dates.

This is an other result from an ATR28SS2, Customer reported initial run of 279rwkws @ 22psi, out of a factory SR20det motor with Tomei step 1 drop in cams.

Final result is 261rwkws @ 21psi and 273rwkws @ 23psi retarded 3 degrees for the longevity of the motor.

Dynoed on pump 98 fuel, 20psi was reached @ 3900RPMs.

atr28ss2power.jpg

atr28ss2boost.jpg

Hey stao,

My SS2 was internal gate, now going external gate. Am i best to buy a blanking backing plate from you or should i buy an actual external gate rear housing? I remember someone saying the other day the the cut out for the IWG flapper would affect rear housing flow or something similar? As im running it on an RB30DET flow is already going to be an issue so trying to make the best of this situation :)

Cheers mate.

Mainly its out of the same jig as mine and it worked ok on my car. Can be modified with no problems.

Water is in m18x1.5

Oil is in m10x1.25

Do NOT use oil restrictor on the normal versions of the ss turbos.

Merry xmas every one.

Also is this still correct? As i am going highmount i need to get a new oil feed line made.

so a -4 AN oil feed hose with no restrictor in it will be fine for the SS2?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...