Jump to content
SAU Community

Recommended Posts

An old set of Pirelli slicks 305x680x18

Theres just over 2 seconds to be gained on new 305x645x18 slicks at Sandown if I can do my part.

The car was setup for Phillip Island hence the taller profile tyres.

^ thanks enjoyed that! would love some details on the car. are you commin to the Dec Sandown day?

Thanks

I would like to come if I can make it.

Car Details

R32 GTR setup for track use

Hollinger

RB26 430 AWKW

E85

MOTEC

1290KG no driver or fuel

List goes on and on LOL

Thanks for watching

  • 3 weeks later...

that's excellent....and I've finally seen someone better at cutting corners than an evo driver too :P

looks like you were at the top of top gear for a while about 9min, how fast does it go? looks farking unstable to be going that quick, especially over that jump, it would take some balls. And I love how quick you get to run through reasonably closed forest.

BTW gay horn ....you need to change it to a set of air horns that play a tune. No wonder the other cars were ignoring it

lol yeah I said he needs the 130db air horn from the truck shop, but that breaks the noise restriction limits

the Polaris that started in front of us cut them better then us, which worked out good for us, as they made a new track we went passed him

we normally topped out 3rd along that straight once into 4th and its a 5 speed straight gate geared for 220km at 7000rpm with 35s, it's a VQ35HR ( class restriction of 3500cc ) with a 8500 rev limit

that track was cut down because the rest of the track made that part look like we where running around on a cricket pitch, that was the first time a national round was held at that track and the first national round my brother had done in that car so he was taking it slow to get use to the car, it's to bad the GoPro went flat cause it got a fare bit faster

we left the line in 47th place ( first national event and no prolog due to weather and shit/dangerous original track ) with 15 second gap between cars and where 16th across it with 9th outright and 2nd in class

post-36620-0-98385200-1353834723_thumb.jpg

  • 3 weeks later...
  • 4 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I was using the wiring diagram I have So 12.74V is coming into the rear Fuel Pump relay as I measured.  When I turn the key to ON im getting 0.6V to the Fuel Pump plug; which i assume is backfeed voltage and doesnt include the 12V from ignition power.  The rear relay is working and being triggered.  From the diagram I clearly see the rear relay 80 = Rear Relay going into the Body/H loom (R-27) 27 = Fuel Pump plug going into the Body/H loom (T-20) 40 = Short Connector (R-27) I'm reading 12.74V on the blue/black wire which is the power for the Fuel Pump   From this diagram I can see the Ignition relay goes into the front and up to the ignition  2 = Fuel Pump Relay <1M> (R-27) 37 = ING Relay <1M> I started from the pump using this reference Which the way I read it (referencing Nissan wiring color codes) is: Pin Wire Color Function 1 B/P (Black/Pink) Ground 2 L/W (Blue/White)        ECU Trigger 3 SB (Sky Blue) Fuel Pump 5 L/B (Blue/Black) 12V Constant Tested SB to SB on Fuel Pump for continuity - confirmed Tested negative on Fuel Pump to 12V battery and L/B - confirmed 12V Pulled the relay putting 12V between Pin 1 & 2 and testing continuity on Pin 3 & 4 - confirmed relay   So that has me looking at this part of the circuit to understand whats happening here...and im still confused. From best I can tell; the disconnect is back to my previous diagram; between Ignition Relay and Fuel Pump Relay...which yet again; afaik is where the immobiliser should.    Thats what I was trying to explain to GTSboy; im not trying to fix it myself; yet I seem to have to get a Masters in Electrical Engineering (while im busy doing my actual job of DevOps & Cloud Engineering) somehow.  I just wanted more expert opinions; or more so that what I tested is correct and proves it to something around that area; to go back to the alarm tech (for a 3rd time) that he needs to fix it. He keeps telling me its not the alarm. He lives on the complete other side of the city so i understand not wanting to make a trip but as I said before if its the alarm it should be up to him to fix it. But he's adament its not; even though I pointed out the FP was immobilised through the original alarm. To my mind; it seems that the ECU is sending the signal; but the ignition is not getting 12V down the line.       
    • Maybe also really stiffly sprung track cars. Get the inside wheel up in a corner and all the fun stops. Also me sometimes (rarely) when I have to stand on the brake to convince the diff to drive the wheel that is still on the ground when I'm trying to diagonally get over severe driveway entrance, etc.
    • I feel like I'm missing something. You had an authorised installer come out and install a new alarm. Post install the car doesn't start, and you aren't getting the installer back to fix what they did wrong?
    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
×
×
  • Create New...