Jump to content
SAU Community

Recommended Posts

Hey Guys, anyone know of any good 80 Series or GQ patrol Diesal for sale? I've been searching for a while and looking back through this thread it looks like i am on the right track...

The 80 series we test drove on the weekend was nice and clean, 288km with a lot of extras, asking price is $15k which i was planning too offer $13.5ish.... It seemed really slow though, i know its a big wagon and i know its N/A but does anyone have any feedback on this? It seemed to slow on hills which is going to be worse with my fat ass 34 behind it...

Hey Guys, anyone know of any good 80 Series or GQ patrol Diesal for sale? I've been searching for a while and looking back through this thread it looks like i am on the right track...

The 80 series we test drove on the weekend was nice and clean, 288km with a lot of extras, asking price is $15k which i was planning too offer $13.5ish.... It seemed really slow though, i know its a big wagon and i know its N/A but does anyone have any feedback on this? It seemed to slow on hills which is going to be worse with my fat ass 34 behind it...

I had one, and because of it - I'll never buy an old toyota again. All the major components (heads, diffs, transmission, etc) needed work at some time or another - then problems with the electrics pushed me over the edge.

If it's petrol one you looked at, that is quite expensive to pay (depends what options are on it). It will be very expensive to keep running in fuel costs. If it's a slug now - it will only feel slower the longer you own it.

There is lots of wear an tear on a car of that many k's. double check what's been done on it - cos most of the driveline will be worn.

Don't listen to me - I'm just scarred from the previous experience!

If it's NA diesel I wouldn't go near it for towing. It'll struggle to go up a hill with a boot full let alone towing a trailer. Turbo diesel on the other hand would be great but they're worth a fair bit more.

Not too sure what the NA petrol's go like but I'd still stick with a turbo diesel.

Hmmmm thanks guys! I kind of had the feeling it would be a bit of a slug... The guy has had it since near new and it is pretty well looked after but i guess ill keep looking.

Most factory turbo ones are around the $20k mark which is above what i wanted to spend :/

Hey guys,

I bought a N/A 80 series before we went down to Targa Tas last year and I couldn't be happier with it!!!

It certainly isn't fast but it does the job and is 100% reliable. It tows like there is nothing behind it due to the massive weight of the vehicle you never get the load misbehaving.

However it was too slow for me so I turbo intercooled it about 3 months ago. It is now fantastic, hills that I had to drop to second in before are now fairly easy in fourth gear at 80+km/h.

It still returns about 18L/100k towing fully loaded and when im not towing I can drive over the Brindabella's in it!! If the one you buy doesn't have a large lift and 33's like mine then it will tow even better! I vote for the land cruiser.

Thanks for the info... My concern is putting a turbo on an engine that is near 300k already? I wouldn't have thought it was safe to do so?

Most of the towing will be on highway so it's not that bad but between here and Sydney I have ourimbah hill and mooney to deal with...

My concern is putting a turbo on an engine that is near 300k already? I wouldn't have thought it was safe to do so?

It all depends on the basic health of the engine. Poorly serviced/maintained and trying to extract massive amounts of power gain over stock will result in a short life. Approaching 300k you'd have to give it a good checkover before either buying the thing, or committing to turbocharging it.

Reputable installers seem to target gains of about 40-50% over std, with a close eye on exhaust gas temps. Within those parameters the 1HZ seems to be happy and provide good service.

The owner has had the truck most of its life and serviced it every 5000kms...

You can tell by the overall condition that it has been well maintained (in general) over the years but i guess as we are shopping in the lower price bracket we cant expect too much for the $

I really need to drive a comparison car to make sure its not just me thinking its dead slow but being in Newcastle makes it hard as there are fark all car yards.

N/A 100 series diesel run the same powertrain. They do feel dead.

But they're capable of barrelling along quite well on the flats. It's just hills that slow them up. You are likely to have a GCM of at least 4.5t when towing a Skyline on a tandem trailer.

Provided that basic engine health is good, it will be a good platform for turbocharging and tackling those hills a gear or two higher, as per comments from others.

Hmmmm.... Well i best be shopping for some turbo kits and getting an idea of costs so i can work out if its viable to do this one OR to chase one that is already done.... From what i can tell most of them demand quite a bit extra when they have the turbo kits installed.

Stuff messing about wwith aftermarket turbos and stuff. There's enough choice out there to just find something with a nice "factory seal". Modding an already 3/4 worn out car doesn't make sense to me. Certainly not when your priority should be reliability when hundred of kays from home.

yes yes yes, I know everyone's things have all been awesome and never let them down yadda yadda. But there is NOTHING quite like a factory done job.

buy a gu ti

10k should get you into a petrol on gas

For the coin involved, this is a very good turn-key option. People comment about how thirsty those things are, but the difference in purchase price will have you driving for years - and in a much newer machine.

Still I like the fact a Tojo runs full time 4WD.

Stuff messing about wwith aftermarket turbos and stuff. There's enough choice out there to just find something with a nice "factory seal". Modding an already 3/4 worn out car doesn't make sense to me. Certainly not when your priority should be reliability when hundred of kays from home.

yes yes yes, I know everyone's things have all been awesome and never let them down yadda yadda. But there is NOTHING quite like a factory done job.

Yeah i know what you are saying....

For the coin involved, this is a very good turn-key option. People comment about how thirsty those things are, but the difference in purchase price will have you driving for years - and in a much newer machine.

Still I like the fact a Tojo runs full time 4WD.

Ill have a look on Carsales in a minute, just finishing a turbo diesal search now...

Stuff messing about wwith aftermarket turbos and stuff. There's enough choice out there to just find something with a nice "factory seal". Modding an already 3/4 worn out car doesn't make sense to me. Certainly not when your priority should be reliability when hundred of kays from home.

yes yes yes, I know everyone's things have all been awesome and never let them down yadda yadda. But there is NOTHING quite like a factory done job.

^This^ If you can't afford a proper turbo diesel then why not make do with a Falcon or somthing for a while? On a long tow drive my auto Mrbitchy Challenger CRD turbo did 11.6L/100, messing around with some old diesel clunker that has been round the clock a few times and does 18 does not make sense.

Edited by 260DET

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Please use a modern ECU. PowerFC with the Nintendo Gameboy controller is horrible. It's not 2005 anymore.
    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
×
×
  • Create New...